news list
1981~2010 item / All 3400 items
-

Electric Roll Film Cutter (W300mm) Bobbin Specification / Model Number MH5EF-W300S Released
High-speed OPP roll film in any length ■Features ● Hygienic and improves work efficiency as it does not come into contact with other films. ● High-speed cutting of approximately 65 sheets per minute. ● Made of stainless steel, making it resistant to moisture and highly durable.
-

Electric Wide Tape Cutter / Model Number MH5YC-300Y Released
Wide surface protection tape, newly designed for films ■Features ● Memory function (6 types of 3 digits, 1 type of 4 digits) ● Maximum tape width of 300mm and 500mm ● Compact design with a body depth of 175mm
-

Thick paper one-touch sealing adhesive bag (length 432mm × width 340mm × gusset 160mm) 1000 pieces / Item number M2397KF-433616N Released.
Sturdy thick paper craft bags. They have various uses! They can be sealed with a single touch because they are adhesive.
-

Hot water bath for 18L cans (100V) / Model number M1483HW-1100H released.
●This machine is a water bath heating tool specifically designed for "one-gallon cans" and "pail cans." ●It can evenly heat the container by warming it with water. ●In addition to a temperature control function, this machine also has an over-temperature prevention feature, allowing for safe use.
-

Drum can immersion heater (200V) / Model number M1483TM-5327H released.
This is a heater designed specifically for 200-liter drums to heat and maintain the temperature of liquids. It is used by inserting it through the drum's opening (G2, inner diameter φ57).
-

Water supply direct connection ball tap type humidifier unit (three-phase 200V) / Model number M1483BT-3210H released.
Stainless steel water tank, a sea heater with a reasonable capacity density, a hanging float with a special safety design, triple safety against dry burning including the main circuit and operation circuit, and equipped with adjustable suction rubber feet that can be used on sloped drain pans. This is a popular version of a pan-type humidifier that utilizes abundant experience and technology, with careful attention to detail.
-

Clothing Ozone Sterilization Cabinet (White Clothing) Model Number M812SB-C12K Released
The ozone sterilization and deodorization locker for clothing thoroughly sterilizes and deodorizes garments such as lab coats and coats using the power of ozone. With ozone concentration settings and cycle count settings, it can accommodate various scenarios by allowing for quick sterilization in a short time or safe sterilization over a longer period. Additionally, with the optional shelf, it can also be used for sterilizing and deodorizing items other than lab coats and clothing, such as slippers and indoor shoes.
-

Folding basket cart Model number M2853FB-166717N now available for sale.
A mechanism for a vertically foldable (I-shaped) cart that has never existed before. It will significantly improve the efficiency of loading and unloading cargo.
-

Reach forklift tooth set / Part number M3581FP-33TSRM now available for sale.
■Features ●Safety measures for reach trucks ●Prevention of lateral swaying and falling with rails on both sides ●Brackets come with magnets for easy installation
-

Magnetic bumper for reach forklifts / Part number M3581FP-1268BAM now available for sale.
■Features ●Prevents foot pinching accidents ●Easy installation with a magnetic design ●Strong magnets embedded in the back ●Can be easily installed by anyone ●Compatible with reach forklifts from all manufacturers
-

Magnetic Tire Cover for Reach Forklifts / Model Number M3581FP-4230BCM Now Available
■Features ●To prevent foot entrapment accidents with drive tires.
-

Comfortable seat cover with Velcro type, model number M3581FP-ALS2M, now available for sale.
■Features ● A seat for all seasons that provides a comfortable sitting experience just by laying it down. It doesn't get stuffy in summer, so it won't stick to you with sweat, and in winter, it retains warm air, keeping you cozy. ● An item that has gained attention throughout the year, also used in golf carts running on golf courses. ● Easy to attach with Velcro.
-

Buried box-type PVC waterproof sheet (W1200×H400×D600) Model number M1305WPS-1200BT released.
It is a waterproof sheet in a box shape. You can create a water basin with excellent waterproofing without any major construction. The piping connection is done with a 40A screw. By simply making a formwork to fit the sheet, you can easily create a water catchment for a waterfall or a circulating water basin. If you expand it within the specified dimensions of the formwork, you can create a water basin without waterproofing work.
-

Electric three-wheeled transport cart for wasteland / Model number M281EL3T-120KG launched.
Easy-to-operate electric transport vehicle Can easily navigate slopes and narrow paths, significantly improving work efficiency.
-

Aluminum battery-operated work platform (3.6m) / Model number M196WA-36BP now available for sale.
Lightweight and exceptionally stable aluminum scissor lift work table. This rechargeable lift work table achieves unprecedented weight reduction by incorporating aluminum in its main components. Despite being made of lightweight aluminum, it supports high-altitude work with strength and stability equivalent to that of steel. *No qualifications are required for operation. *When working on a work surface at a height of 2 meters or more, please implement fall prevention measures in accordance with labor safety and health regulations.
-

Food waste disposal bin with drainage valve / Model number M458RT-168LPCY now available for sale.
A kitchen waste bin that allows for easy draining, volume reduction, and disposal of food waste. ■Features ● The bottom of the basket is made of fine perforated mesh, preventing leftover food from falling through.
-

Waterproof outdoor UV insect attractant trap / Model number M1070WST-36K released.
This is an outdoor suction insect trap that reduces the risk of insects invading buildings. In addition to the conventional approach of "not attracting," "not allowing entry," "early capture," and "preventing establishment," it is a new concept product that increases the overall effectiveness of measures by reducing the initial population.
-

Small Micrometer 20x (with white LED light & battery holder) / Model number M109MCS-7LES-20LDW Released
■Handheld microscope with fixed magnification Four types of magnification available: 20×, 50×, 100×, and 200× Ideal oblique lighting for viewing metals and uneven surfaces Illumination from an angle creates shadows on uneven surfaces, making them stand out.
-

Digital Angle Sensor <Separate Type> <Separate Type> Set / Model Number M1321AS-752SET Released
It is a lightweight, compact, high-precision angle detector. The sensor unit and the separate display unit can be installed in a visible position.
-

Stainless steel garbage collection storage with wood grain (W1300×D750×H1160mm) / Item number M1584KS-1307-MST released.
● A waste collection shed with a revolving door and front panel featuring a high-quality and beautiful wood grain pattern. ● A soft design that harmonizes with the landscape. ● Level adjustment is possible from the inside. (Height adjustment range is 0 to 40mm)
-

Catalog and brochure stand (A4 size) 2 columns, 4 tiers / Model number M590CPS-K35B released.
Catalog and brochure stand (A4 size) 2 columns, 4 tiers ● The brochure case can be detached from the main unit when needed, making it convenient for replenishing brochures. Size: W230 × D50 × H305 / (internal dimensions) W220 × D45 × H300 Material: Styrene (recycled material)
-

Large Edamame Pod Peeling Machine Model Number M2827PL-EB589P Released
Our products are used throughout Japan, from Hokkaido to Kyushu, and are effectively utilized for non-standard items such as damaged or single-pod edamame. Additionally, there is no longer a need to manually shell the beans, which previously required longer boiling times to soften them for easier peeling. Now, you can produce flavorful shelled beans in large quantities in a short time without that necessity. The tedious task of shelling edamame is made easy and hassle-free. Since you can process a large amount of edamame at once, the time and costs associated with the work are significantly reduced. Shelled beans and empty pods are discharged separately, while the thin skins remain attached during processing.
-

Broad bean pod peeling machine Model number M2827PL-SS321P now available for sale.
We have become able to machine-peel the pods of out-of-spec fava beans. Until now, I had to endure painful hands while peeling them by hand, but from now on, I will be freed from this heavy labor. When the pods are fed into the machine, it peels the pods and separates the beans from the skins.
-

Soaking soybean and edamame thin skin separator Model number M2827PL-SB221P Released
It is made at the request of many tofu shops, and since the skins of the soaked soybeans are removed without applying heat, there are no concerns about heat issues that everyone worries about. Additionally, since it is not shaved, there is no need to worry about the yield being reduced. Why not try making tofu in a slightly different way that is easy and convenient? In particular, the soy milk becomes less bitter and very easy to drink. Furthermore, the defatted okara has a soft texture and becomes delicious okara.
-

Cardboard Box Compression Crusher / Model Number M353DT-711GS Released
The processing of empty cardboard boxes, which are generated in large quantities in logistics warehouses and take up space, can be done easily, safely, and quickly by anyone!
-

Digital moisture meter for residential and commercial buildings / Model number MC29PT-10SMS now available for sale.
■Features ●The moisture condition of houses and buildings can be instantly explored and measured on the surface and internally using two modes: resistive measurement mode and capacitive probing mode.
-

Concrete moisture meter / Model number MC29EM-8521S released.
■Features ●Measures moisture without damaging concrete ●Includes calibration check plate
-

Tesla meter / Model number MG10G-1012M released.
Tesla Meter ■Features ● Simultaneous display of real value and hold value! ● Improved usability in dark environments with the addition of a backlight! ● The probe shape is flattened, making it easy to fix to automatic measuring devices! ● The "detection mode" selection alerts you with a buzzer when values within the measurement range are detected during measurement.
-

Joint-type large container (670×503×288mm) / Model number MC31KC-P40105S released.
It is a lightweight, collapsible flat container that achieves a large capacity. It has many excellent features as an alternative to large corrugated plastic boxes.
-

Drum can jacket heater (with temperature controller 200V) / Model number M1370DM-311JH released.
Completely wrap it up to keep the heat in.