news list
2131~2160 item / All 3401 items
-

Water-absorbent floor roll mat (910×153m) / Product number M2329NK-PFR36201 Released for sale
■Features ●Highly absorbent, very thin, durable, and easy to maintain. Captures dirt, salt, and moisture without leaving footprints behind. ●The adhesive-backed floor mat does not shift, curl, or flip over, yet can be easily removed when it's time for replacement. ●Excellent durability that can withstand harsh traffic conditions. Can be used continuously for up to 3 to 6 months depending on the situation and traffic patterns. ●Tested and approved as flame-resistant.
-

Large Safety Pole (H1500mm) / Product Number M1417LSP-H1500-09C Released
Height 1,500mm with excellent visibility Highly visible even in dark places with large reflective material Height 1,500mm Large reflective specification Easily seen from high places such as trucks
-

Fatigue-reducing cushion mat, joint type (495×1700×t17mm) / Model number M1417RF-AMJ18C, now available for sale.
● Excellent cushioning reduces weight burden. ● Oil and water resistant. Water absorption rate below 1%. ● Strong against cutting chips. ● The outer edge is processed with a 45-degree incline. ● Can be joined to extend the width to your preferred length. ● With the M1417RF-AMJ18C extension piece, you can increase the width by 820mm each time. ● Flame retardant compliant product, test number E1180335.
-

Slip-resistant cushion mat (600×900×t6mm) Black / Model number M1417AS-MM0609C-BK Released
Simply laying it down will exhibit a slip-resistant effect. It has grip strength and prevents slips, trips, and falls in advance. With excellent cushioning, it reduces the strain on the feet and lower back from long hours of standing work.
-

Upper frame attached work platform / Model number M510RFB-3A released.
● A step stool with a large top board and reinforced safe design ● Compact design with a thickness of 114mm! A foldable step stool that can be stored anywhere ● Step stool with upper frame (M510L-**EP)
-

Tiger-striped cushion tape that can be cut by hand (50mm x 3m) / Product number M1417YT-HC0503C Released
It comes with a cushion that absorbs shock. It has notches, making it easy to cut by hand. It can be cut to approximately 10mm in width. Warning signs and shock mitigation can be implemented simultaneously. It uses an adhesive that leaves minimal residue.
-

Extra thick tiger stripe cushion (t30×W100×L1000mm) / Item number M1417YT-ET0310100C Released
● A cushion with a thickness of 30mm absorbs strong impacts. ● Improved visibility and collision accident measures can be implemented simultaneously. ● It comes with adhesive tape on the back, making it easy to install by simply sticking it on.
-

Acrylic safety mirror (φ165mm) / Item number M1417SM-P165C now available for sale.
● Durable and ultra-lightweight, for accident prevention, safety checks, crime prevention, and shoplifting prevention in stores. ● Just peel off the sticker and stick it on. ● For collision prevention, eliminating blind spots, and security measures in factories.
-

Safety guard for handle of the finger pinch prevention cart (φ28–34mm) / Part number M1417SHG-2113945REC now available.
● It is optimal for preventing finger pinching at the cart handle section. ● It controls operations at the dangerous corners of the cart handle and establishes a safety rule to grip from the inside. ● It can be easily installed with the included screws. ● It accommodates various cart handle diameters and can be securely fixed. ● The danger zone is prevented from being gripped with the danger indication color red.
-

Bench (main unit) / Model number M715MB362-0611M Released
Indoor Bench ■Features ●This is an indoor bench that uses synthetic leather cushioning on the seat surface. ●It blends seamlessly into various installation environments without any hesitation. ■The synthetic leather on the seat surface ensures a comfortable texture and cushioning.
-

Large Foot-operated Platform for High-altitude Work / Model Number M510F-60EP Released
● A step stool with a large top board and reinforced for a safe design ● Compact design with a thickness of 114mm! A foldable step stool that can be stored anywhere ● Step stool with upper frame (M510L-**EP)
-

Tabletop Compact Endless Sealer (Side Seal) / Model Number M83TC15-Y5YS Released
● Compact tabletop sealing machine achieving minimal size and weight ● Main body frame made of stainless steel ● Built-in pressure roller for increased sealing strength ● Conveyor slide: adjustable front and back, up and down
-

Non-contact heart line control device / Model number M749G-711KG released.
- You can select from three types of tone colors with just one touch! - Equipped with a mute function and a φ3.5mm headphone jack! ■ Three patents supporting heart line contrast! 1. Reception sensitivity adjustment function: You can adjust the reception sensitivity of the signal! 2. LED emission display: Clearly indicates signal strength with LED lights! 3. Large diameter speaker: Dedicated speaker that ensures detailed sound quality.
-

Non-contact heart line control device / Model number M749G-711KG released.
- You can select from three types of tone colors with just one touch! - Equipped with a mute function and a φ3.5mm headphone jack!
-

L-shaped corner cushion (1m) Black / Item number M1417LC-PU0710C-BK Released
Made of polyurethane, it is suitable for outdoor use. It is a very soft material with excellent elasticity. It also has excellent abrasion resistance.
-

Accordion-type cushion mat slim type (600×900mm) beige / Item number M1417JM-609005C-BE released.
● It fits more finely and complexly than a bellows mat. ● It can be cut vertically and horizontally, allowing for installation tailored to the object. ● It is a cushion that can accommodate various shapes, including flat and curved surfaces. ● It is very soft and has excellent elasticity.
-

Buffer material roll holder (under workbench storage) W1200mm / Item number M651SWRS-1200HY released.
Roll material stand, hanging type Can be attached to the tabletop for smooth cutting of roll materials. ■ Example of setup on a work table This is a convenient installation method for use against a wall. Estimated assembly time: 40 minutes for one person *Roll material is not included with the product.
-

Explosion-proof nitrogen dioxide detector (NO2) (0-100ppm) / Model number MI1MMTA-NO2 now available for sale.
It is a maintenance-free nitrogen dioxide concentration meter. It is a highly reliable, user-friendly, and cost-effective detector that ensures the safety of operators and operational compliance.
-

Swivel bolt for heavy load, model number M3583SBA-60T, now available for sale.
RoHS compliant ■Features ● Can be used as replacement bolts for caster units. ● Designed for strength and durability to withstand heavy loads. ● Easy to install and level. ● Can be used on slight inclines. * Please note that some may not be installable due to the bolt hole diameter of the caster unit and the width of the round base. Please check.
-

Swivel bolt (with round seat vibration-damping rubber) Part number M3583SBAR-60T released.
RoHS compliant ■Features ● Using vibration-damping rubber at the bottom of the round base is effective for adjusting the installation of vibrating equipment. ● A nylon washer is used between the round base and the bolt to make leveling smoother. ● Ideal for use on floors that are sensitive to scratches and slipping. *Please note that some units may not be installable due to the diameter of the bolt holes in the caster unit and the width of the round base. Please check.
-

Small duct fan (blade diameter φ200mm) single-phase 100V model number M281SDF-2001J released.
Ideal for air blowing in narrow spaces and for draft purposes Uses NKS bearings, which are highly durable ■Features ● Optimal for exhaust and smoke removal ● Can be connected to optional duct hoses ● Easy to carry ● Uses NSK bearings
-

Electric Water Tape Cutter / Model Number M3133EL-80Z Released
Electric Water Adhesive Tape Cutter ■Features ● Allows easy cutting of water adhesive tape with simple operation. ● Equipped with auto mode function. ● Cutter lifespan is approximately 100,000 cuts.
-

Compost Moisture Meter / Model Number M432RX-1500G Released
This is the latest electric resistance moisture meter. It measures the moisture content of compost and is used for quality control. Simply insert the sensor into the sample and press the switch to instantly display the moisture value in percentage. It features eight user range functions and average value display, allowing for on-site comparative testing.
-

Tabletop digital waterproof stainless steel dual-sided display scale / Model number M1450V22XWE-1501TJP released.
This waterproof food scale sets a new high standard in the industry with its excellent efficiency, accuracy, and durability. Its waterproof design, large LED display, and the ability to quickly obtain high-precision results make it the ideal scale for tasks involving liquids and use in wet environments.
-

Stainless Steel Pot Mixer 300L / Model Number M1236T-300MVRM Released
Stainless steel pot mixer
-

Absorbent Floor Mat (91.4cm × 1.5m) Black / Model Number M2329NK-P36202BK Released
The floor mat backed with ultra-safe adhesive creates a safe walking surface at entrances and walkways. For customers and employees, a high-friction walking surface is installed in problem areas during rainy times. The adhesive-backed floor mat does not shift, curl, or flip over, but can be easily removed when it's time for replacement. Depending on the situation and traffic patterns, it can be used for up to 3 to 6 months. Note: It is not flame-retardant.
-

Entrance carpet mat (91cm x 7.6m) Harbor pattern / Black / Model number M2329NK-P913X25P-BK Released
Keep the floor safe and capture dirt and liquids at the door with a runner backed with carpet adhesive. Replace rental rugs in entrances, hallways, and lobbies with stylish absorbent mats to prevent slipping, tripping, and falling.
-

Water, oil, and solvent-compatible industrial absorbent mat (91cm x 15.3m) / Model number M2329NK-P36301P released.
Heavyweight Grippy Industrial Absorbent Mat with Adhesive Backing — Keep your floors dry and safe using the most durable absorbent mats from the manufacturer, even in forklift areas.
-

Pocket Anemometer / Model Number MI1PK-4131M Released
The MI1PK-4131M anemometer is a pocket-sized digital wind speed meter. It displays wind speed and temperature simultaneously in digital format. The wind speed display can be changed to knots, km/h, m/s, or mph, and it features maximum wind speed and average wind speed modes. It is ideal for marine sports, outdoor activities, and wind speed testing in indoor air conditioning systems. We offer it at a low price.
-
Pocket Anemometer / Model Number MI1PK-4131M Released
The MI1PK-4131M anemometer is a pocket-sized digital wind speed meter. It simultaneously displays wind speed and temperature in digital format. The wind speed display can be changed to knots, km/h, m/s, or mph, and it features maximum wind speed and average wind speed modes. It is an ideal anemometer for marine sports, outdoor activities, and wind speed testing in indoor air conditioning systems. We offer it at a low price.