■Features ●With side support ●Head drive frame thickness 30mm ●Transport at a steep incline of up to 60° in limited space

Slice vegetables to your preferred thickness. 1. Comes standard with a stepless thickness adjustment mechanism for the slicing disc. 2. Built-in magnetic switch in the feed opening for improved safety. 3. Easily slice thin vegetables like cucumbers with the included pusher. 4. Grate daikon or julienne with optional discs.

For preventing cargo collapse, easy to roll and economical. Recommended for forklift operations where thickness is not necessary.

● Streamlining operations by handling transportation and weighing with one unit ● Large display for instant reading of weight values ● Equipped with a tip structure and intermediate rollers that make insertion into pallets easy (excluding stainless steel) ● The hand pallet section is made in Japan, allowing for repair support ● Domestic labor inspection certification obtained (No. TC21420)

The MI196H-O3-1M, equipped with a transmitter output for ozone concentration measurement (low concentration) and a calibration certificate, continuously monitors ozone concentration and displays it digitally on the device's screen. If the measured ozone concentration exceeds the specified level, a loud buzzer at 100dB will sound at a distance of 1 meter, and an alarm will be displayed on the screen, activating the relay.

The MI1TP-140L*** is a compact temperature data logger designed for high-temperature and high-pressure sterilizers (autoclaves), with a high heat resistance temperature of +140°C. Since the temperature sensor and temperature memory unit are integrated, it can also be used for temperature measurement in transportable heating devices.

Instantly and reliably determine the condition of the wrist strap checker when attached. The connection method can be selected according to the wrist strap checker being used. When using a combo tester, simultaneous measurement of the wrist strap checker and footwear is possible.

■Oxygen 7000L Cylinder Stair Climbing Crawler Transport Vehicle (Single Unit) / Model Number M1500SGBKA-70M When going up stairs, it can transport to the second floor without damaging the corners of the stairs.

Slicing strawberries, cherry tomatoes, and julienning citrus peels ■Processing capacity: approximately 200 pieces (2-3 kg) / 10 minutes *Weight is an estimate and can vary significantly depending on the size of the ingredients being sliced. ■Blade unit is dishwasher safe *Please hand wash the main unit, upper cover, etc., using a neutral detergent.

This is a water flow brush that allows for cleaning while directly running water. (Please connect it to a hose for use.) It is convenient for cleaning the soles of shoes and comes with a water flow feature.

Reasons for Needing a Tabletop Cardboard Cushioning Material Manufacturing Machine Cardboard can be used to wrap and protect fragile items. To achieve this, it is cut in a special way to transform it into a softer and more flexible material. Additionally, if you own a business that needs to ship large quantities of packages daily and requires protection for those packages from damage during transport, you are likely spending a significant amount on packaging materials. In that case, you should consider acquiring a cardboard shredder.

■Features ● A compact and lightweight measuring tool that can be used by hand ● Quickly and accurately measures the length of electrical wires with minimal error ● Ideal for measuring electrical wires for end sales or when large quantities of electrical wires of the same length are needed in factories ● Measurement error of 1-2% (may vary depending on measurement conditions)

● The table lift is finished in stainless steel. ● As a workbench ● For high-altitude work 　* When using for high-altitude work, it is necessary to take measures to prevent falls by installing handrails, etc. ● Operation switch (standard is a push-button switch)

Meter board material stock long cart ■External dimensions ●(L) 2000mm, (W) 600mm, (H) 850mm (excluding wheels) ●Weight approximately 95kg (including wheels)

Ideal for protecting various parts during moving operations, preventing collisions and damage to moving items in advance. Made of lightweight and durable polypropylene hollow board. Its accordion shape makes it perfect for protecting corners and complex shapes. Additionally, its tiger stripe pattern makes it suitable for warning areas such as entrances.

● The table lift is finished in stainless steel. ● As a workbench ● For high-altitude work 　※ When using for high-altitude work, it is necessary to take measures to prevent falls by installing handrails, etc. ● Operation switch (standard is a push-button switch)

● The interior features a two-tier folding intermediate shelf. ● Sturdy with a maximum load capacity of 800 kg (300 kg for the upper tier + 500 kg for the lower tier). ● Double doors that open 270° for full access. ● Mesh at 50 mm intervals, eliminating concerns about load removal or spillage. ● Special casters provide stable straight-line movement and easy maneuverability. ● High performance with an L-shaped folding mechanism.

It is designed to easily reach an ergonomically correct position with minimal strain on the operator. The fork can be adjusted to an angle of up to 20 degrees to the left or right with screws. Standard equipment includes a foot brake and foot protector.

The handle can be turned and locked in a position away from the work area. It applies to both sitting and standing postures. It is designed to allow the operator to easily reach a low-load angle in an ergonomically correct position without the need to bend down or stretch up. The forks can be tilted up to 90 degrees. Both rear wheels are equipped with a parking brake and foot protector as standard.

Low concentration oxygen measurement This is a low concentration oxygen meter that specializes in measuring oxygen concentrations below 10 vol%. There are two types available for the low concentration type.

40% weight reduction of the main body, aluminum, easy assembly, lightweight shelf cart. *Comparison with existing steel shelves from the manufacturer.

Reliable polyester that accommodates various tasks without damaging the cargo. Lifting belt with the highest strength and ease of use (Grade 4).

■Features ● This is a bracket for fixing construction signs to guardrails. Attach the main body to the guardrail post, insert the T-bar, and adjust the sign to a visible angle. ● Durable hot-dip galvanized finish. ● Effectively utilizes the shoulder of the road. ● Does not interfere with cleaning or snow removal operations. ● 360° rotation (15° pitch). ● Can be installed on curved posts for both guardrail posts and blow frames. * This is exclusively for conventional sign frames that fold front and back with 19/25 mm square pipes. It cannot be used with sign frames (flat type) that have a folding dimension of about 1/2 that of conventional types.

● The internal spring mechanism allows for stacking and secure storage. ● When used individually, it can be easily moved as a cart.

For eliminating step differences at the site, made of durable steel with a chrome-plated finish. *Only the movable side top is made of aluminum. Lightweight: weighs 26kg.

Rust-resistant stainless steel. Its beautiful appearance and hygienic properties make it ideal for use in clean environments such as food and medical industries.

Making logistics sites more comfortable and enabling high efficiency in operations ■ The switch is easy to see and has excellent operability The amount of assistance, braking force, and speed can be adjusted in four levels User-friendly options include a voice guide compatible with Japanese, English, and Chinese.

The portable digital spectrophotometer, MF2PTM-7749H, measures low concentrations of hexavalent chromium (0–300 μg/L), while MF2PTM-7723H measures high concentrations of hexavalent chromium (0–1000 μg/L). The dedicated reagents used for measurement can be selected according to the frequency of measurement. This device also allows for numerical verification and calibration of the main unit using a validator (standard solution set), ensuring high accuracy and reliability for peace of mind.

Stylish cart with high quality and high performance type 5% plant-based plastic (bio PE) blended Uniform load: 150kg

★Achieving unbeatable prices through store setup ★Customers can enjoy piping hot dishes just by pulling a string ★A brown lunch box that enhances the sense of luxury has been introduced. ★Available in two colors: gold tray and black tray. ★Can also be used as a successor to the square stacked boxes. ★The steam heat kit is available in two types: Kit 1 and Kit 2.