Heat-resistant ultraviolet intensity meter
For checking the illuminance of UV lamps used for drying in high-speed printers.
● High heat resistance of 350℃. Supports high illuminance of 2000mW/square cm. ■ The main features of this device 1. Elimination of printing drying defects You can directly measure and monitor the illumination of the high-capacity drying lamps used in high-speed printing machines, contributing to the eradication of printing defects. 2. Sufficient heat resistance The heat directly under the lamp exceeds 300℃, but this device has sufficient heat resistance, allowing for safe measurement.
basic information
■Specifications - Display: 3 1/2 digit LCD (maximum display 1999) - Measurement range H range: 2000mW/cm² 1999mW/cm² (display resolution: 1mW/cm²) L range: 200mW/cm² 199.9mW/cm² (display resolution: 0.1mW/cm²) - Measurement wavelength range: 260–400nm - Maximum sensitivity wavelength: 370nm - Accuracy: ±4% (full scale) - Sensor structure: UV photodiode - Light receiving part heat resistance: 350℃ for up to 30 seconds - Operating environment: 0–50℃, below 80% RH - Power supply: DC9V stacked dry battery (006P or equivalent) - Battery life: over 100 hours - Weight Display unit: 140g (including battery) Sensor probe: 480g
Price range
Delivery Time
Model number/Brand name
M673V-413A
Applications/Examples of results
■Attention to Detail in This Area 1. The sensor probe has a scale, allowing for measurements to be taken at the same position by fixing the stopper. 2. It is equipped with an automatic zero adjustment function, so measurements can begin immediately after turning on the power switch. 3. It features a data hold function to accurately read measurement values. 4. To prevent battery drain, it automatically turns off after approximately 3 minutes.
