Concrete Thickness Gauge (Without Tablet) Model Number M2598TG-3NK
It is possible to measure deep wall thickness (measurement depth: 8cm to 1.8m) that cannot be measured with electromagnetic wave radar.
The operability has become significantly easier compared to conventional impact elastic wave devices. ● Measurement depth: 8cm to 1.8m If the thickness exceeds 60cm, the built-in impactor will not provide sufficient output. It is necessary to strike with a hammer. For concrete thickness between 60cm and 90cm, use a 0.5kg hammer; for thicker structures exceeding 90cm, use a 1.5kg hammer.
basic information
● Compact design with integrated impactor and sensor ● Complete the process from measurement to report creation alone, high cost performance ● From concrete thickness to internal cavity exploration, it is also possible to detect honeycombing, voids, and cracks. ● Learning time for operation is only 10 minutes ● Measurement accuracy is high at 2% (when calibration is performed). Measurement error: The measurement error arises from the sound velocity in the material. The initial setting value is 12,000 ft/sec (3,675 m/sec), and the measurement error in this state is about 10%. By performing sound velocity calibration using known structural thickness, accuracy can be improved to about 2%. ● Compliant with ASTM C1383-4 ● Number of measurement points: By setting a grid during the initial setup, continuous measurement becomes possible. It can output values for horizontal position (X), vertical position (Y), frequency, and thickness (Z) in a text file (comma-separated). ● Grid setting: Approximately 100 measurement points can be taken in one hour. ■ Original ultra-compact elastic wave oscillator (impactor) and high-sensitivity receiving sensor in a compact integrated design, enabling high-performance exploration easily by one person.
Price range
Delivery Time
Applications/Examples of results
Thickness gauge
