Small Ultrasonic Cutter / Model Number M2745EK-412E
It has two cutting modes: normal mode and high mode, and also features an automatic adjustment function (T.A.F circuit).
■Minimizing melting to the utmost: T.A.F circuit The ultrasonic cutter adjusts its cutting ability (input to the transducer) based on the load applied to the blade during cutting (such as the hardness, thickness, and melting state of the object, the user's force application, and the angle of the blade). - When the load is high: High cutting ability (input to the transducer) - When the load is low: Low cutting ability (input to the transducer) The ultrasonic cutter is a tool that cuts while vibrating. During cutting, frictional heat is generated due to the vibration of the object being cut and the blade. This has been adopted as the best driving method currently considered, reflecting the user's desire to reduce melting caused by this frictional heat. ■No need to keep pressing the button? Do you want it to operate only while pressed? In response to user feedback that it is difficult to work while pressing the button, conventional machines introduced an operation method where the handpiece switch operates for 10 minutes after being pressed and released. (It stops if pressed again.) Since it continues to operate even when the finger is released, there are also requests to operate only while the button is pressed, so the M2745EK-412E allows users to choose either operation when powering on.
basic information
- Turn on the power without doing anything >>> It operates for 10 minutes after pressing and releasing the switch. - Turn on the power while pressing the handpiece switch >>> It operates only while the handpiece switch is pressed (however, it will turn off every 3 minutes for temperature checks). ■ Equipped with a temperature sensor for transducer protection High power mode has been added. In high power mode, power is supplied close to the allowable input limit of the ultrasonic transducer when the load is large. To prevent thermal destruction of the ultrasonic transducer due to friction heat with the cutting material and self-generated vibration heat, a protection sensor is installed that stops operation when the temperature inside the handpiece rises to a certain level. *In the new operation method for M2745EK-412E, continuous pressing of the handpiece switch does not allow for temperature monitoring, so the maximum time for pressing the switch is set to 3 minutes. ■ Variable power It is possible to switch between two modes: normal mode for regular use and high power mode for critical situations, using the switch on the side of the main unit. High power mode may overheat in about 5 minutes, depending on the cutting material.
Price range
Delivery Time
Applications/Examples of results
Cutter
