Electric Water Tape Cutter / Model Number M2406T-611E

Product Inquiry

Specialized for duct tape (type that uses water to moisten the adhesive side) - automatic feed - automatic cutting method, compatible with tape widths up to 80mm.

The cut lengths are preset at 15cm, 25cm, 35cm, 45cm, 55cm, 65cm, 75cm, 85cm, 95cm, and 105cm at 10cm intervals, allowing for easy fixed-length cuts with just a press of a key. Manual operation allows for adjustment of the cut length in 1cm increments. It can memorize up to 5 different tape cut lengths, enabling retrieval and sequential looping. The operator can choose from four modes: "Preset Mode (select and press the key to take), Auto Mode (just take the tape that comes out), Sequence Mode (repeat in the order of multiple memorized lengths), Free Cut (tape is dispensed while the key is pressed)." Near the tape exit, there is a heater, a tray filled with water, and a brush. The bristles of the wet brush are warmed by the heater, causing the adhesive side of the dispensed tape to rub against the brush, melting and activating the "adhesive tape." To promote the activation of the adhesive in cold areas, a heater is standard equipment. The features of "water-activated tape" are expected to be effective in preventing unauthorized opening and foreign matter contamination, making it an eco-friendly tape that is currently gaining attention in the packaging and logistics industry due to its excellent recyclability.

basic information

■Features ●Water application and cutting as needed Automatically feeds and cuts water-activated tape to a fixed length. The user simply needs to "take the tape and stick it." ●Length memory Can store up to 5 different tape lengths. ●Heater function At low temperatures, the built-in heater warms the bristles of the wet brush, promoting the activation of the adhesive. ●Four operating modes - Preset mode (select a key and press to take) - Auto mode (fixed automatic feed, automatic cut) - Sequence mode (repeats up to 5 stored lengths in order) - Free cut (feeds out while the key is pressed) *Depending on the type of tape and environment, there may be a cutting dimension error of approximately ±10mm. *In rare cases, water-activated tape may not be usable. It is recommended to use the manufacturer's verification service before purchasing the dispenser. ■Functions ●Dedicated to water-activated tape (type that uses water to wet the adhesive side) ●Compatible with both plain water-activated tape and reinforced thread water-activated tape ●Equipped with a heater to reliably activate water-based adhesive even in low room temperatures ●Length memory (sequence / up to 5 length settings)