Waterproof and dustproof head-mounted work video camera recorder M3541P-21A
Waterproof and dustproof head-mounted work video camera recorder / Model number M3541P-21A Helmet-mounted compact camera. Continuous recording for approximately 9 hours.
● Recording Stop 1. Please turn on the main power switch of the unit (position: right side). 2. Press the REC button, and the red LED will blink, accompanied by a beep sound and vibration from the unit. Press the REC button again to stop recording. ● Recording Time Approximately 9 hours of continuous recording can be achieved with a full charge. ● Video Quality High-definition recording at approximately 1 million pixels (1280×720). ● Frame Rate 25fps Records at 25 frames per second. ● Video Quality High-definition recording at approximately 1 million pixels (1280×720). ● Waterproof Dustproof/waterproof design (no waterproof case required) Equivalent to IP56 (IPX5 dustproof) / (IPX6 waterproof). ● Unit 1. The unit is to be mounted on the back of the helmet. 2. Bend the wing part of the unit's mounting bracket to fit the curve of the helmet. 3. Remove the protective sheet from the double-sided tape and attach the unit to the back of the helmet. ● LED Light LED light (ON/OFF setting available during recording) The LED light allows for recording in dark places. * If the LED light is turned on, the recording time will be approximately 5 hours and 30 minutes. * If used in an environment below -15°C, the LED light may dim.
basic information
●Playback 1. Connect the USB charging cable to the device and the computer to play back on the PC. 2. Insert the micro SD card into the SD card slot on the PC to play back on the PC. ●Camera Installation 1. Attach the camera to the right side of the helmet. 2. Adhere the camera mounting bracket to the curve on the right side of the helmet. 3. Insert the C-shaped bracket into the camera mounting bracket. 4. Snap the camera in place and adjust the angle. ●SD Formatting There is a format button on the bottom of the device; pressing it with a wire or thin stick will format the SD card. ●Options 1. By using the optional U-shaped clip bracket, it is possible to attach it to the brim of a hat. 2. Use the mounting attachment on the device to insert it into a belt. ●Clock Setting 1. Scan the QR code with a computer or smartphone to display the clock setting screen. 2. Record with the camera aimed at the QR code within 1 minute. (A distance of 10 to 20 cm between the camera and the QR code is recommended.) 3. When the clock setting is successful, there will be one beep, the green LED will light up for 5 seconds, and then the red LED will blink to indicate that recording has started.
Price range
Delivery Time
Applications/Examples of results
Security camera
