Ultra-low wind speed sensor / Model number M1069S-02SBE
This sensor is a thermal wind speed sensor that outputs an analog voltage and is characterized by a structure that can detect wind speed and direction using a bidirectional thermistor.
■Operation Procedure 1. Connect the sensor unit to the amplifier unit. Connect the mini DIN 8P connector. 2. Perform power wiring to the amplifier unit. Connect + to terminal 1 and - to terminal 2. Input the rated voltage. 3. Perform the output wiring. Bidirectional 0 to ±1V DC: Connect ± to terminal 3 and GND to terminal 4. A direction 0 to 5V DC: Connect + to terminal 5 and GND to terminal 4. B direction 0 to 5V DC: Connect + to terminal 6 and GND to terminal 4. 4. After warming up, perform ZERO calibration. Calibration is done using the ZERO VR. (It is adjusted at the factory, but please perform it if configuration is necessary.) 5. SPAN calibration is based on the calibration coefficient measured with our wind speed generator. (Do not use the SPAN VR unless there are reference values, etc.)
basic information
■Precautions 1. Since it is designed for ultra-low wind speeds, applying wind speeds of 2 m/sec or higher may compromise the sensor's performance and could lead to failure. 2. Modifications to the hole diameter of the wind speed measurement outlet will result in loss of performance, so please do not perform any such modifications. 3. The - line of power input 2 and the GND line of 4 are insulated, so they cannot be used in common. 4. Using in the A-B direction in the vertical direction can be measured, but it is not covered by performance guarantees. 5. It cannot be used in areas exposed to water or with high dust levels.
Price range
Delivery Time
Applications/Examples of results
Wind speed sensor
