Cable Locator for Electric Wires / Model Number M74FK-2052F
Quickly and accurately detects wires in walls, ceilings, and floors, both in powered and unpowered states.
- Detects damage, disconnections, and short circuits, and easily identifies breakers and fuses. - Safety rating of CAT IV 600 V. - Comes with the i400 AC Current Clamp accessory, which sends a trace signal to the cable when access to bare conductors is not possible.
basic information
■Specifications ●Receiver Measurement Category: CAT IV 600 V Operating Voltage: 600 V AC/DC Operating Frequency: - During Power: 6.25 kHz - When Not Powered: 32.768 kHz Signal Display: Numeric, Bar Graph Display, Beep Sound Response Time: Chip Sensor (During Power/Not Powered): 500 ms NCV: 500 ms Battery Monitoring: 5 seconds Signal Current Output (Normal): None Signal Voltage Output (Nominal): None Range Detection (Outdoor): Chip Sensor: During Power Maximum Distance (Wireless): Up to 6.1 m Pinpoint Detection: Approximately 5 cm Chip Sensor: When Not Powered Maximum Distance (Wireless): Up to 4.5 m Pinpoint Detection: Approximately 5 cm NCV (40 Hz to 400 Hz) Maximum Sensitivity: 90 V up to 2 m Minimum Sensitivity: 600 V up to 1 cm Current Range: None Basic Accuracy: None Display Size: LCD 63 mm Display Dimensions (Width x Height): 37 mm × 49 mm Display Resolution: 240 x 320 pixels Display Type: TFT LCD Display Colors: 16-bit
Price range
Delivery Time
Applications/Examples of results
■Complete Kit The M74FK-2052F high-performance wire tracer kit comes with all the accessories needed to start tracing wires and circuits. The accessory kit includes test leads, test probes, blades, a round power adapter, and alligator clips for connecting the transmitter's electrical system. By using the included alligator clips and test leads to connect the transmitter to bare conductors, you will always achieve the most accurate results. However, in situations where direct connection to bare conductors is not possible, you can use the included i400 current clamp in "loop" mode to induce a boosted 6kHz signal through insulation. The kit also includes a battery and a hard carrying case.
