シロ産業 Official site

Timer Display Unit External Input Specifications / Model Number M507TW-4S-EIN

It is a timer display device that measures elapsed time and remaining time.

There are two functions: count up and count down, and it is possible to measure in "minutes: seconds" and "hours: minutes." The "start/stop" and "reset" functions can operate via external input. When the preset time is reached, it will display a fast blinking signal. By connecting a buzzer or rotating light, it can also notify you of target times, etc. (External output specifications only).

Related Link - https://www.webshiro.com/syouhinsetumei9/M507TW-4S…

basic information

M507TW-4S-EIN: External input specification (no external output) M507TW-4S-EIO-CPN: External output specification M507TW-4S-EIO-RLN: External output specification ■Common Specifications Counting method: Count using external signal input or the operation switch on the main unit External input: 2 points: Count/Clear, no-voltage contact or open collector External output: 1 point open collector or 1 point relay output, built-in buzzer does not sound Display characters: 7-segment LED, character height approximately 38mm, 4 digits Visibility distance: Approximately 15m Display color: Red Display modes: Count up (resets to 0 and counts up again after exceeding 99:59) Count down (stops counting at the lower limit value) Negative count (stops counting at the lower limit value) External dimensions (W×H×D): 180×75×42mm (excluding protrusions) Weight: Approximately 0.5kg Power supply voltage: AC100V±10% (50/60Hz), or 006P type 9V alkaline battery Power consumption: Maximum 2VA Operating temperature: 0–45℃ (no condensation) Humidity: 45–85%RH (no condensation) Accessories: AC adapter (batteries not included)

Price range

Delivery Time

Model number/Brand name

M507TW-4S-EIN

Applications/Examples of results

● Increased cost awareness and reduced setup time ● Adherence to designated processing times, reduction of defects, and improved quality ● Effective use of waiting time during autonomous driving, etc. ● Understanding of abnormal conditions, reduction of downtime, and improvement of operating rate

Recommended products

Distributors