【F701-10, 12, 16】 Small-sized rolling knurling tool for flat surfaces - Can perform flat surface processing on workpieces with a diameter of 50 mm or less. - The holder has a simple structure with a single wheel attachment. - Two types of wheels, φ10 and φ15, can be used. - Please check the corresponding processing diameter and the wheel protrusion distance (dimension X) from the holder dimension table to select the appropriate wheel. - Recommended for flat surface processing on Swiss-type automatic lathes. The design does not interfere with the guide bush even on Swiss-type automatic lathes.

[F701-20, 25-N] Flat Surface Rolling Knurling Tool - Can be used for flat surface processing on workpieces with a diameter of 200 mm or less. - The holder has a simple structure with one wheel attachment that can be used for both left and right orientations. - Two types of wheels, φ20 and φ25, can be used. - Please refer to the holder dimension table to check the compatible processing diameters and the wheel protrusion distance (dimension X) to select the appropriate wheel.

[F711-10, 12, 16] Universal Pattern-Compatible Knurling Tool - It can process both flat and cross knurling on workpieces with a diameter of 24 mm or less. - There are three wheel mounting holes; for flat knurling, one wheel is mounted in the center, and for cross knurling, one wheel is mounted on each side. - Recommended for cross knurling on Swiss-type automatic lathes. The design does not interfere with the guide bushing even on Swiss-type automatic lathes.

[F711-20U, 25U] Universal Pattern-Compatible Knurling Tool - It can process both flat and diamond patterns on workpieces with a diameter of 120 mm or less. - There are three wheel mounting holes; for flat patterns, one wheel is mounted in the center, and for diamond patterns, one wheel is mounted on each side. - Recommended for diamond pattern processing on lathes and similar machines.

[F712-08U, 10U, 12U-LD] Roller Knurling Tool for Automatic Lathe Shoulder Processing - It can process both flat and diagonal knurling on workpieces with a diameter of 45mm or less. - This holder is designed to allow knurling up to the edge of steps. - The head section has been miniaturized and optimized for use on Swiss-type automatic lathes. - If step edge processing is not required, the more rigid F711 type is recommended.

[F712-10, 12, 16] Universal Pattern-Compatible Knurling Tool - Can process both flat and diamond knurling on workpieces with a diameter of 50mm or less. - This holder is designed to allow knurling up to the edge of a step. - Recommended for processing edges on NC lathes and similar machines. - For cases where edge processing is not required, the more rigid F711 type is recommended.

[F712-20U, 25U] Shoulder Processing Rolling Knurl - It can process both flat and diamond knurls on workpieces with a diameter of 120 mm or less. - This holder is designed to allow knurling up to the edge of a step. - It can be used interchangeably for both left and right-handed operations. - Recommended for processing edges on NC lathes and similar machines. - If edge processing is not required, the more rigid F711 type is recommended.

【F751-12】 Insert-type rolling knurling - It can process both flat and diamond patterns on workpieces with a diameter of 20 mm or less. - The design allows for processing through clamping, reducing processing load. - By using different wheel sizes, the applicable processing diameter can be changed. - Recommended for small diameter processing on Swiss-type automatic lathes. The design does not interfere with the guide bush even on Swiss-type automatic lathes.

[F761-20M, 25M] Clamping Type Rolling Knurling - It can process both flat and diamond patterns on workpieces with a diameter of 44 mm or less. - The design allows for processing through clamping, reducing processing load. - By using different wheel sizes, the applicable processing diameter can be changed. - Recommended for processing long workpieces on NC lathes.