You can inspect the inner surface of containers and tubular components in one go (new image processing technology).

2000532728容器、筒状部材の内面を一度で検査できます(画像処理の新技術).jpg

You can inspect the side and bottom of cylindrical tubular components or containers! There is no need to rotate multiple cameras or workpieces to inspect the sides and bottom!

When imaging the inner surface of a workpiece shaped like a cup, there is no need to rotate the workpiece or insert a camera inside it. In conventional methods for imaging the inner surface of cylindrical components using traditional lenses, it was necessary to either rotate the workpiece or surround it with multiple cameras, as the technique involved capturing part of the inner surface from an angle. Even when using devices like endoscopes, complex mechanisms were required, such as inserting the endoscope into the interior of the workpiece. To address such issues, using a special lens allows for viewing the interior from the outside of the workpiece. 【Basic Specifications】 - Wide Field of View Since it can inspect the entire 360° surface of the interior of the object at once, there is no need to rotate the workpiece. - Deep Depth of Field It can simultaneously inspect not only the inner wall surface but also the bottom surface. - Inspection from the Outside Unlike devices that require inserting a lens inside, it can capture images from the outside all at once. - Easy Installation, Space-Saving Unlike conventional imaging from an angle, it captures images directly from above, eliminating concerns about the angle.

basic information

Standard Specifications - Minimum Field of View (Diameter × Height) 10 × 10 mm - Maximum Field of View (Diameter × Height) 120 × 190 mm - Visible Object Height High-Resolution Type 6 ~ 120 mm VGA Type 10 ~ 190 mm - Hole Diameter 10 ~ 120 mm - WD 5 ~ 62 mm

Price information

Prices vary significantly depending on the configuration. If you let us know your desired specifications, we will first provide you with a rough estimate.