アーカイブ【アクア・クリスタル・リング取扱専門店】 Official site

■Consultation Details: There was a consultation regarding issues with scale adhesion. ■Equipment: Small cooling tower ■Location: Tokyo, Japan ■Industry: Automotive parts factory ■Result: We have introduced this with photos on our company website below. *Please click on the "Related Links" below to view.

【To companies with cooling towers】 Can your cooling tower really get through this summer without any troubles? If you have even a little anxiety... Why not have a "health check" for your cooling tower? We will conduct a water quality test for free, limited to the first 5 companies! ＝＝＝＝＝＝＝＝＝＝＝ Finally, the summer season when cooling towers are at their peak operation is approaching. This time of year marks the beginning of the season when cooling equipment faces the most load. And every year at this timing, we receive numerous inquiries from companies nationwide, such as: "The cooling efficiency has decreased, and cooling shortages are occurring." "The pump has stopped urgently due to cooling abnormalities." "The pipes are clogged with scale, reducing the supply water volume." We receive many inquiries regarding troubles caused by cooling shortages. So, why do cooling troubles occur in the first place? For more details, please visit the special page below. ↓↓↓ https://lp.archives.co.jp/inspection

Recently, there has been a sharp increase in consultations regarding "red rust and red water" in cooling equipment such as cooling towers, chillers, piping, and heat exchangers. Common concerns among the companies seeking advice include: - Decreased cooling efficiency compared to before (in some cases, this is detected as an anomaly) - Red rust not being removed even with the use of chemicals - Water becoming cloudy and red again shortly after being replaced - Frequent cleaning and maintenance, leading to excessive effort and labor These cases often involve companies that have left the issue unresolved for years, unsure of what to do since chemical treatments have not improved the situation. Red rust tends to occur in inconspicuous areas within the piping, which often leads to delaying countermeasures. However, during this time, the piping continues to deteriorate due to the red rust. By the time it is noticed, there may be holes causing water leaks, or the piping itself could break, leading to emergency repairs and the urgent shutdown of production lines. Our company has resolved over 100 cases of red rust and red water issues over the past 20 years. We have added our latest case studies to our "Case Study Collection." The severely discolored red water has dramatically improved. Please take a look.

<Removes and suppresses rust from chillers, piping, and heat exchangers> The 'Aqua Crystal Ring (ACR)' is a scale removal device that demonstrates tremendous effectiveness in removing scale from cooling towers, without the need for chemicals or power supply. ACR not only removes scale but also has a remarkable effect on rust. In most cases, a large amount of rust accumulates in chillers (cooling water circulation devices) and piping. As a result, it is common for the water inside the chiller to turn bright red (red water). By using ACR, red rust can be converted to black rust, and the murky red cooling water can be improved to a clear state. This is achieved without any use of chemicals and does not require a power supply. ◆◆ We have received a lot of feedback ◆◆ Recently, in addition to scale removal from cooling towers, we have received many inquiries regarding rust in chillers and piping. In response, we have compiled materials on the effects of ACR on rust. Companies struggling with rust, please take a look.

We also remove and suppress rust from chillers, piping, and heat exchangers. The 'Aqua Crystal Ring (ACR)' is a scale removal device that demonstrates tremendous effectiveness in removing scale from cooling towers, without the need for chemicals or power supply. ACR not only excels in scale removal but also has a remarkable effect on rust. In most cases, a large amount of rust accumulates in chillers (cooling water circulation devices) and piping. As a result, there are often cases where the water inside the chiller turns bright red (red water). By using ACR, you can convert red rust into black rust, improving the murky red cooling water to clear. This is achieved without any use of chemicals and does not require a power supply. ◆◆ We have received a lot of feedback ◆◆ Recently, we have been receiving many inquiries about rust in chillers and piping, in addition to scale removal from cooling towers. In response, we have compiled our past achievements and case studies. Please see for yourself how the bright red water has turned clear.