中央理化 本社 Official site

USA Micro Pump Company manufactured new type magnetic gear micro dosing pump. It is a pump capable of transferring fluids containing slurry-like substances.

★Features and Performance★ Transferable slurry (example) Can transfer liquids containing hard particles up to 5μm. Hard particles refer to particles with a Mohs hardness of 6 or higher, and it is recommended to use a filter of 40μm for particles with a hardness of 6 or lower, and a filter of 5μm for particles with a hardness of 6 or higher. Wide voltage compatibility: 10V~38V - Liquid contact body: SUS316 - Liquid contact gear: Nickel carbide - Liquid contact seal: PTFE - Maximum flow rate: 3.4L/min (5500rpm) - Pressure resistance: 21Bar - Temperature resistance: -46 ~ +132℃ - Fluid viscosity: 0.5 ~ 1500cps - Fixed output voltage: DC36V 4.1A Max For more details, please download the catalog and check. Gear pump Gear pump Gear pump Gear pump

Disassembly and assembly can be done with just one nut! A diaphragm pump with a high cleaning capability and simple design! [Free demo unit available for loan]

【Features】 ○ Fast maintenance ○ Long-lasting diaphragm ○ Few parts ○ Simple air system ○ Self-sufficient, dry up to 3.6m ○ High viscosity transport ○ Dry running OK ○ Low shear ○ Oil-free ○ Stainless steel is standard SUS316L ○ Integrated diaphragm of Teflon + rubber as standard ○ High cleanliness ○ Shaft does not slide, no O-ring used ○ Restart function available when stopped, no need for relief valves, etc. ● Example collection available ● For more details, please contact us or download the catalog.

Prevent and suppress piping pulsation caused by pumps! Reduce piping pulsation, vibration, noise, and distortion by 95%! Achieve smooth pump transfer!

Many pumps, including our air-driven diaphragm pump "One Nut Pump," cause pulsation in the discharged fluid, leading to vibrations, noise, and distortion in the piping, which can damage piping joints, support brackets, and other components of the piping system. Our pulsation dampers, when installed at appropriate points in the piping system and supplied with air, eliminate up to 95% of piping pulsation, mitigating the aforementioned issues. They also support uniform discharge of fluid products. We use long-lasting integrated PTFE diaphragms, and you can choose from a variety of diaphragm materials including PTFE, nitrile, EPDM, and anti-static PTFE. The body material consists of SUS316L, with virgin or anti-static PTFE and polypropylene as standard materials. Piping connections range from 1 inch to 3 inches, with options for threaded (BSP, NPT), flange (JIS10K, ANSI), and hose connections. It can also be directly mounted on our One Nut Pump. For more details, please visit the product page for the One Nut Pump or feel free to contact us.

[Introducing all 34 case studies!] We present examples of the use of sanitary pumps in the food industry, as well as in the cosmetics and personal care products industry, and the chemical industry.

【Other Listings】 ■ Pharmaceutical product manufacturers ■ Chemical manufacturers ■ Chemical products ■ Paint and ink related ■ Pump model selection *For more details, please refer to the PDF document or feel free to contact us.

A diaphragm pump that can be disassembled and assembled with just one nut. It significantly contributes to reducing maintenance time!

**Features** - Fast maintenance - Long-lasting diaphragm - Low-cost spare parts - Simple air system - Self-sufficient, dry up to 3.6m - High viscosity transport - Dry running acceptable - Low shear - Oil-free - Abundant materials - Teflon (PTFE) diaphragm as standard - High cleanliness - Adjustable pressure and speed - 15-minute maintenance - Restart function during stop, no need for relief valves, etc. *For details, please request materials or view the PDF data from the download.*

Oil-free (no lubrication) with low noise! And an environmentally friendly oil-free air motor stirrer!

For more details, please refer to the PDF document or feel free to contact us.

Easy up and down lifting platform! Environmentally friendly oil-free air motor stirrer.

【Central Rika Air Motor Stirrer: Details】 ＜LZB33-B2.5-ETP＞ ■ No shaft set screws (fixed screws) ■ Scratch-resistant ■ One-touch fixation ■ Easy length adjustment ■ High clamping force ■ No key processing required ■ Zero thrust load *For more details, please refer to the PDF document or feel free to contact us.

Providing optional parts tailored to various scenes!

For more details, please download the catalog or contact us directly.

Ceramic blade that does not release metal ions, compatible with up to 100L.

【Features】 ○ Patents obtained in Japan, the USA, and Germany ○ A structure with countless holes of a constant diameter in a rotating disc and a fixed disc, where the holes align through sliding rotation, allowing the liquid sent by the propeller to be cut as it passes through ○ Compared to other products, the circulation cycle of the liquid is larger, and high frequency is generated between the fixed and rotating parts, resulting in better performance ○ The contact parts are standard SUS316, with Teflon also available ○ The propeller is made of Teflon ○ Improved to reverse the conventional flow from bottom to top to flow from top to bottom, with models designed to enhance the retention at the bottom of the tank ○ Models LZB14, LZB33, and LZB46 adopt ceramic fixed blades and rotating blades, demonstrating sharpness in cutting and reducing metal ions ○ The air motor uses oil-less technology and comes with filters of 5 microns and 0.1 microns, designed to minimize discharge noise and prevent the release of fine particles to the outside ● For more details, please contact us or refer to the catalog.

1,272mm to a maximum of 2,072mm. Air motor stirrer lifting frame.

【Features】 ○ 1,272mm to a maximum of 2,072mm ○ Compatible with LZB33-B2, LZB42-B2, and LZB46-B2 ○ Air cylinder type ○ Legs are covered with SUS304 plates ● For more details, please contact us or refer to the catalog.

Introduction of various parts used in air motor stirrers.

【Product Lineup】 ○ 50mm 4-blade propeller LZB14-G5/G10 ○ 70mm Kai cross LZB-G5-G10 ○ 86mm turbine LZB-G5-G10 ○ 300mm 3-blade propeller LZB22-CB5 to LZB54-B2 ○ Kai cross turbine for sediment prevention ○ Flat paddle for high viscosity ○ Flat blade turbine for high viscosity ○ Inclined blade turbine for high viscosity ○ Anchor paddle for high viscosity ○ Disperser 30mm to 250mm for dispersion (with ring and without ring) ○ For drum can insertion ○ Sphere dissolution stirring blade ○ 2-blade propeller 100mm to 300mm for stirring ● For more details, please contact us or refer to the catalog.

It is possible to drain the liquid while the shaft is rotating, and it's okay to be in a free-running state.

【Features】 ○ The stirring shaft is made of pipe, allowing for liquid extraction through the upper rotary joint and pump while stirring, and also enabling transfer. ○ Liquid can be drained while the shaft is rotating, and it is fine even if it goes into a free-spinning state. ○ It is also possible to inject liquid. ○ The new ETP method is adopted, so there is no damage to the shaft at all. ○ It can be configured with sealed flanges, open flanges, or clamp types. ● For more details, please contact us or refer to the catalog.

High efficiency and high torque! Introducing an air motor stirrer for experiments and research.

【Other Features】 ■ Low heat generation and high efficiency ■ Strong against heat, vibration, and impact ■ High safety due to robust mechanical structure ■ High torque ■ Low air consumption ■ Achieves low rotation without a gearbox ■ Compact design ■ 30-300 rpm; drive air consumption 1/5 *For more details, please refer to the PDF document or feel free to contact us.

Introducing the arm-type oil-less air motor stirrer using dry air!

For more details, please refer to the PDF document or feel free to contact us.

Introducing the air motor stirrer: quiet operation, easy to use, and no grease/oil!

For more details, please refer to the PDF document or feel free to contact us.

Low heat generation and high efficiency! Introducing air motor stirrers for process engineering.

【Other Features】 ■ Low heat generation and high efficiency ■ Strong against heat, vibration, and shock ■ High safety due to robust mechanical structure ■ High torque ■ Low air consumption ■ Achieves low rotation without a gearbox ■ Compact design ■ 30-300 rpm; drive air consumption 1/5 *For more details, please refer to the PDF document or feel free to contact us.

It can be raised and lowered simply by lightly pressing the mixer up and down with your hand.

【Features】 ○ When placing in or removing from a container, the lift can be raised or lowered simply by lightly pressing the stirrer up and down with your hand. ○ For LZB22-CB5 → V2 type stand, chrome-plated → Stroke: 380mm ○ For LZB33-B2.5 → H type stand, chrome-plated → Stroke: 700mm ○ For LZB42-B2/LZB46-B2/LZB54-B2 → Weight: 22–25kg → Stroke: 700mm ● For more details, please contact us or refer to the catalog.

Explosion-proof... safe for organic solvents and explosive environments.

【Features】 ○ Explosion-proof → Safe for organic solvents and explosive environments ○ Uses oil-free air motor ○ Variable speed, adjustable RPM via valve ○ Depending on the usage location, can be piped outdoors for exhaust ○ No noise (uses silencer filter) ○ Box is made of SUS304 ○ Air motor is SUS304 for use in drafts ○ LZB14-MS: For 1L to 2L ○ LZB22-MS: For 1L to 10L ● For more details, please contact us or refer to the catalog.

Oil-less air motor type (dry air) - explosion-proof stirrer with Heller mounting.

【Main Specifications】 ○LZB14-2S/LZB22-2S →Air Motor: SUS304 →Wetted Parts: SUS316 (Standard) / SUS316L (Custom) →Dyna Lip Seal: PTFE →Discharge Pressure: MAX 0.5MPa →Temperature: -50℃ to 180℃ →Output: 0.16kw 0.22hp →Rotational Speed: Low Speed 50 → High Speed 550rpm ○LZB22-4S/LZB33-4S →Air Motor: SUS304 →Wetted Parts: SUS316 (Standard) / SUS316L (Custom) →Dyna Lip Seal: PTFE →Discharge Pressure: MAX 0.5MPa →Temperature: -50℃ to 180℃ →Output: LZB22: 0.25kw 0.34hp / LZB33: 0.39kw 0.52hp →Rotational Speed: LZB22: Low Speed 50 → High Speed 430rpm / LZB33: Low Speed 50 → High Speed 470rpm～ ○LZB14・LZB22・LZB33 Sealed Flange Heller Type →Manufacturer: Atlas Copco 　Output: 0.16kw 0.22hp 　Rotational Speed: 1400rpm 　Supply Air Pressure: MAX 0.6MPa ●For more details, please contact us or refer to the catalog.

Air consumption reduced to 1/5! Introducing a powerful air motor with high efficiency and high torque.

【Other Features】 ■ Low heat generation and high efficiency ■ Strong against heat, vibration, and shock ■ High safety due to robust mechanical structure ■ High torque ■ Low air consumption ■ Achieves low rotation without a gearbox ■ Compact design ■ 30-300 rpm; drive air consumption 1/5 *For more details, please refer to the PDF document or feel free to contact us.

Achieved a weight reduction from 30 kg to 6 kg, which is 1/5 of the conventional weight! Free distribution of the electric stepless variable speed mixer comprehensive catalog is ongoing!

*Please download the catalog for more details.

Options for sealed flange type air motor stirrer

【Features】 ○ Catches dirt with a net ○ Powder crumbs are collected inside the dustpan ○ Centrifugal force expels moisture outside the dustpan ○ Available for shaft sizes φ25mm and φ15mm ● For more details, please contact us or refer to the catalog.

Pressure-resistant 1 MPa, torque 3 Nm motor mixer!

【Product Specifications】 ○EMF-30 ■Motor: Inverter Motor ■Power Supply: 3-phase 200V 0.2kW ■Torque: 3Nm (MAX) ■RPM: 300 (MAX) ■Temperature: 200℃ ○AMF-30 ■Motor: LZB33L-A013 ■Power Supply: 0.39kW 0.52hp ■Torque: 6.3Nm (MAX) ■RPM: 300 (MAX) ■Temperature: 200℃ *For more details, please download the catalog or contact us directly.

Optimal for use in high-speed, draft-free, and clean room environments. Ultra-compact, weighs 2.5 kg, explosion-proof design.

【Features】 ○ Magnet drive, oil-free air motor ○ Ultra-compact, weight 2.5 kg ○ Explosion-proof design ○ No gears ○ No grease ○ No belts ○ Air motor is oil-free ○ No dust generation ○ Made of SUS304 ○ Capable of forward and reverse rotation ● For more details, please contact us or refer to the catalog.

There are no leaks even in high vacuum. It can also be used at normal pressure and slightly pressurized conditions.

【Features】 ○ Adopts magnetic drive for induced rotation ○ No leaks even in high vacuum, usable at atmospheric and slightly pressurized conditions ○ Capable of high-speed rotation ○ Compared to conventional products, it has good durability as it is not sealed with O-rings on the shaft ○ Can be directly connected and used with currently used stirrers ○ Stirrer attachment uses Teflon® attachment, so there is no worry of damage even when attaching glass stirring rods ● For more details, please contact us or refer to the catalog.

Adoption of the Central Rika Corporation's original "cage-fixed propeller."

【Simple Type Features】 ○ The shaft, basket, and propeller rotate in the same manner. ○ Easy to disassemble and clean, as it only involves the shaft, basket, and propeller. ○ More affordable compared to the improved type. ○ When powder is added all at once, it tends to dissolve and form a film on the mesh easily, resulting in fewer clumps and less liquid passing through, thus the dissolution time is about twice that of the improved type. 【Improved Type Features】 ○ The basket is fixed while the shaft and propeller rotate, resulting in a greater impact on the liquid and clumps passing through the mesh, making it less likely to form a film and allowing for faster dissolution. ○ The addition of a ring-shaped propeller makes it easier to introduce liquid into the basket. ○ Baffles are provided to facilitate liquid entry into the basket and prevent foam generation. ○ The ring-shaped propeller allows for better extrusion of high-viscosity liquids, resulting in a higher circulation volume compared to the crab type. ● For more details, please contact us or refer to the catalog.

A gear pump can be used to transfer slurry liquid.

【Features】 ○ Capable of pumping slurry liquids with a gear pump ○ Optimal as a metering pump ○ No pulsation ○ Minimal detection of metal objects (some parts are in contact with SUS materials) ○ Corrosion resistance ○ Long lifespan ○ Viscosity MAX 1,000 CPS ● For more details, please contact us or refer to the catalog.

A system that can accurately record the discharge flow rate.

【Features】 ○ A system that can accurately record discharge flow rate → Easily record the liquid delivery amount for one minute using an electronic balance ○ By inputting 4-20mA or 0-5V output signals into the controller, the pump can change the discharge flow rate according to the program ○ -46℃ to 121℃ ○ 1ml to 5L/min ○ Leak-free ○ Minimal pulsation ○ Self-priming ○ Chemical resistant ○ Variable flow rate ● For more details, please contact us or refer to the catalog.

Leakless, low pulsation, self-priming, chemical resistance, variable flow rate.

【Features】 ○ Design aimed at simplification → By reducing the number of components and using only the essentials, problems are minimized, and operations on-site are simplified. ○ Structural materials → As seen in all products from Micro Pump Co., materials are carefully selected for their corrosion resistance and minimal wear. The exterior of all pumps is made of 316 stainless steel to enhance durability and reduce installation issues. ○ Low friction → Easy handling of non-lubricating liquids, long lifespan, and capable of dry running for short periods. ○ Excellent durability against chemicals → Capable of pumping strong chemicals and solvents. ○ Minimal thermal expansion → Due to slight thermal expansion, tolerances are reduced, allowing for a larger operational temperature range. 【Regulator/Controller Lineup】 ○ FC500: Digital voltage, speed, and flow rate controller ○ VC-102: Digital DC voltage regulator ○ VC-106: Digital voltage, speed, and flow rate controller ○ VC-105: Digital voltage and speed controller ● For more details, please contact us or refer to the catalog.

Self-priming vacuum 724mmHg - Pulseless (almost no pulsation)

【Features】 ○ Self-priming vacuum 724mmHg ○ Pulsation-free (almost no pulsation) ○ Liquid suction from a vacuum ○ For liquid circulation ○ Safety explosion-proof, pressure-resistant explosion-proof, air motor type available (custom order) ○ Seal-less… magnetic drive ○ Volumetric discharge ○ From low temperature to high temperature ○ Pressure resistance of pump head ● For more details, please contact us or refer to the catalog.

Leak-free magnetic drive system - low pulse

【Features】 ○ Leak-free magnetic drive system ○ Low pulse (due to gear pump system) ○ Quantitative capability available ○ Usable from -45℃ to 121℃ ○ Maximum suction of 724 mmHg mercury column ● For more details, please contact us or refer to the catalog.