限界式ゲージ
限界式ゲージ
測定する公差の最小寸法と最大寸法の測定面をもち、その測定面が入るか否かで製品の合否を判定するため、簡単に判定することができます。
1～12 item / All 12 items
-
[Case Study of Limit Gauge Production] For Serration Groove Spacing
Measuring the distance (angle) of the serration groove of the TM case! Production example for positional accuracy.
last updated
-
Limit gauge for serration groove spacing.
Measuring the serration groove spacing of the TM case! Introducing products for positional accuracy.
last updated
-
Limit gauge <pitch gauge>
Reference measurement dimension is positional accuracy φ0.28! It combines the direct distance between the primary and secondary reference holes and the measurement of the hole positions of the primary and secondary references.
last updated
-
Limit gauge for direct spacing of 2 holes
Fix two pins to the plate! Introducing our products for positional accuracy that we have prepared.
last updated
-
Limit gauge for screw holes
A ring with a step has been installed to check the hole depth on the side!
last updated
-
Limit gauge for inner diameter of angled holes.
The reference measurement dimensions are φ7 +0.4/-0.15! A sloped ring is attached to the flange part.
last updated
-
Limit gauge for internal diameter
The reference measurement dimensions are φ5.9±0.15! If it fits on the through side, it's OK; if it fits on the stop side, it's NG.
last updated
-
[Case Study of Limit Gauges] Pitch Gauge
Introducing a case that combines the measurement of the direct distance between the primary and secondary reference holes and the positions of the primary and secondary reference holes.
last updated
-
[Example of Limit Gauge Production] For 2-Hole Direct Spacing
Two pins are fixed to the plate! The reference measurement dimension for positioning is 184.05±0.05.
last updated
-
[Case Study of Limit Gauge Production] For Screw Holes
Judging the step difference by visual inspection or touch! An example of installing a ring with a step difference.
last updated
-
[Case Study of Limit Gauge Production] for Internal Diameter of Angled Holes
Check for hole penetration from the side! Determine whether the inclined surface of the flange contacts the product.
last updated
-
[Case Study of Limit Gauge Production] for Inner Diameter
The reference measurement dimension is φ5.9±0.15! Our standard limit gauge.
last updated