データコントロルズ Official site

Media converter (repeater) capable of wavelength conversion and transmission distance extension for 40G QSFP+.

■ Network management possible with FRM220 chassis and NMC ■ Supports 40G repeater mode / 4 × 10G optical multiplex mode ■ 40G link interface - Ethernet / IEEE802.ba 40GE-SR4/LR4/ER4 ■ 40G multi-link (fiber optic) interface - Ethernet / IEEE802.ba XLAUI and OIF: CEI-11G ■ Flexibility and scalability with QSFP+ port support ■ Hot-swappable card modules and I/F ■ Jumbo frame support ■ DMI function support with QSFP+ modules ■ Loopback test function ■ 3R function

10G Ethernet Optical Media Converter: FRM220-10GC-TS

■Compliant with IEEE802.3an 10GBase-T and IEEE802.3ae 10GBase-R ■Supports jumbo frames (up to 18k) ■Supports loopback testing ■Equipped with LFP function ■IEEE802.1Q VLAN transparent ■Manual settings available via DIP switch *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

Multi-rate/multi-protocol compatible 2-channel optical transponder (repeater)

■ Multi-rate support for communication speed: 1Gbps ~ 14Gbps ■ Protocol transparent 3R optical fiber media transponder/repeater ■ 1+1 optical line switch protection support (switching time: < 50ms) ■ Support for different bit rates on 2 channels ■ Loopback test support ■ SFP DDM information ■ F/W upgrade ■ Configuration via DIP switch or from console/NMC is also possible ■ FRM220 -CH01M, CH02M, CH04A, CH08, CH20 ■ FRM220-CH20, fully loaded (19 Slots + NMC)

Remote monitoring capable 7×1G SFP / 1×10G SFP+ MUXponder

◆ Speed: Client 1Gbps & Line 10Gbps ◆ Network management by NMC ◆ Remote activation, remote loopback ◆ Mapping from seven completely independent 1Gbps services to a 10G line ◆ SFP/SFP+ DDM information ◆ Hot-swappable ◆ In-band management ◆ Can be housed in FRM220-CH02M, CH04A, CH08, CH20 chassis with fans ◆ Trunk SFP+ DWDM/CWDM compatible ◆ Link break interlocking function between independent clients

【1Gbps~10Gbps Multi-rate SFP/SFP+】3R Multi-rate Transponder: FRM220-10G-3R

■ Multi-rate support for communication speeds: 1Gbps ~ 10Gbps ■ Protocol-transparent 3R optical fiber media transponder/repeater ■ 1+1 optical line switch protection support (switching time: < 50ms) ■ Loopback test support with different bit rates on 2 channels ■ SFP DDM information ■ Firmware upgrade ■ Configuration via DIP switch and management via console/NMC also possible ■ Compatible with FRM220 -CH01M, CH02M, CH04A, CH08, CH20

1Gbps media converter compliant with IEEE802.3ah in-band Ethernet OAM management.

◆ IEEE802.3ah In-band Ethernet OAM management compliant ◆ OAM redundant line (redundant link) ◆ 10/100/1000Base-T ×2 ports ◆ 100/1000Base-X SFP ×2 ports ◆ IP-based, WEB-GUI, SNMP management compatible ◆ Dying Gasp support ◆ Online local/remote firmware upgrade ◆ Compatible with FRM220-CH01 standalone chassis or ◆ Compatible with FRM220-CH20 modular management chassis ◆ Auto Laser Shutdown (ALS)

1Gbps media converter compliant with IEEE802.3ah in-band Ethernet OAM management.

◆ IEEE802.3ah In-band Ethernet OAM management compliant ◆ OAM redundant line (redundant link) ◆ 10/100/1000Base-T ×2 ports ◆ 100/1000Base-X SFP ×2 ports ◆ IP-based, WEB-GUI, SNMP management compatible ◆ Dying Gasp support ◆ Online local/remote firmware upgrade ◆ Compatible with FRM220-CH01 standalone chassis or ◆ Compatible with FRM220-CH20 modular management chassis ◆ Auto Laser Shutdown (ALS)

Gigabit optical (SFP) media converter characterized by low latency.

■1000Base-T to 1000Base-SX/LX ■Network management via SNMP or terminal using the FRM220 chassis series ■Automatic recognition or force (fixed) mode ■Automatic MDI/MDIX ■Supports packet sizes up to 9K bytes ■With Link Fault Pass Through (LFP) functionality ■With Auto Laser Shutdown (ALS) functionality ■Protocol transparency

1G 2R Multi-rate Transponder (Repeater)

The FRM220-1000DS is a media converter/repeater for fiber-to-fiber data conversion, capable of handling data rates up to 1Gbps. The FRM220-1000DS supports 2R regeneration (composed of re-amplification and re-shaping). This converter is also compatible with fiber interfaces such as 100Mbps Fast Ethernet, 1000Mbps Gigabit Ethernet, STM-1, Fiber Channel 1, and OC3. The FRM220-1000DS functions as a slide-in card for the FRM220 and can be used as a standalone converter with the FRM220-1000DS. When the FRM220-1000DS card is installed in the FRM220-CH20 rack with SNMP management, administrators can check the status of the converter card, its type, fiber link status, and DDM information of the SFP.

[SFP・In-band management capable] 10/100Base-T to 100Base-X (SFP) media converter (with DIP switch)

◆Automatic crossover MDI/MDIX ◆Flow management control ◆Loopback test support ◆SFP module support ◆Compatible with FRM220-CH20 chassis ◆Line card modules compatible with AC power supply built-in, DC power supply built-in, and AC/DC power supply built-in chassis ◆DIP switch settings ◆RoHS compliant

Gigabit optical media converter with IEEE802.3ah IP/OAM management function: FRM220-1000MS

The FRM220-1000MS is an IEEE802.3ah OAM-compliant gigabit media converter that converts from 10/100/1000Base-T to 100/1000Base-X SFP. Network administrators can monitor, configure, and control each IEEE802.3ah series card and remotely connected OAM-compliant converters using standalone chassis or modular chassis that support SNMP and web management features. The converter's settings include bandwidth control, redundancy, speed settings, VLAN tagging, limited Q-in-Q support, and SFP DDMI. When used as a standalone converter, the 1000M can be managed through a user interface via a web browser.

2-channel in-band monitoring compatible 100Mbps optical media converter card module

◆Automatic crossover MDI/MDIX ◆Flow management control ◆Loopback test support ◆SFP module support ◆Compatible with FRM220-CH20 chassis ◆Line card modules compatible with AC power supply built-in, DC power supply built-in, and AC/DC power supply built-in chassis ◆DIP switch settings ◆RoHS compliant

Customizable DWDM Mux/DeMux filter for the FRM220 series: FRM220-DWDM

■Low insertion loss ■High channel isolation ■Low PDL ■Uniformity between channels ■Excellent reliability and stability ■Reliable passive WDM optical technology ■Easy expansion for ring networks ■RoHS compliant *For more details, please refer to the catalog. Feel free to contact us as well.*

Customizable CWDM Mux/DeMux for the FRM220 series: FRM220-CWDM

■Complete native mode performance ■Passive model that does not require power ■Protocol transparent, unlimited ■Uses standard ITU CWDM wavelengths ■LC connector ■Can be housed in FRM220 chassis with management capabilities ■Can be housed in FRM220 chassis for integration with other transponders/repeaters and CWDM applications *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Even if the main line goes down, it switches to the backup line instantly, ensuring a highly reliable network.

■ Latch function. When power is lost, the switch retains its current state. ■ Switching time due to protection < 50 ms (FRM220-OPS51) ■ Switching time due to protection < 20 ms (FRM220-OPS52) ■ Compatible with wavelengths from 1 to 16 ■ Guarantees traffic with three switching methods: automatic switching, no switching, manual switching ■ RX threshold settings possible for switching ■ Optical I/F type: LC connector ■ The normal operation confirmation and protection line are physically separated fibers ■ Path switching at L1 level ■ Models available that support multi-mode (OM3) (FRM220-OPS51M)

【Maximum 15dB Optical Output】EDFA (Optical Booster Amplifier): FRM220-OAB15

■1-channel EDFA booster amplifier (compatible with FRM220 chassis) ■Maximum 15dB optical output ■Automatic power control (APC) ■Automatic constant current (ACC) ■Low noise figure ■Low power consumption *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

4G 3R Multi-rate compatible transponder: FRM220-4G-3R

■ Multi-rate support for communication speeds: 1Gbps ~ 4.25Gbps ■ Protocol-transparent 3R optical fiber media transponder/repeater ■ 1+1 optical line switch protection support (switching time: < 50ms) ■ Loopback test support with different bit rates on 2 channels ■ SFP DDM information ■ Firmware upgrade ■ Configuration via DIP switch and management via console/NMC also possible ■ Compatible with FRM220 -CH01M, CH02M, CH04A, CH08, CH20

Hotline phone/light converter: FRM220-FXO/FXS series

■Telephone audio can be transmitted via fiber optic up to 120 km. ■Network management is possible via terminal, web, and SNMP (when housed in FRM220 chassis). ■Caller ID pass-through function. ■Selectable FXO or FXS mode. ■Supports FXS-FXS hotline. ■Manual settings can be configured via DIP switch. *For more details, please refer to the catalog. Feel free to contact us as well.

The connection alarm will be extended with optical fiber.

■ Transmission of opening and closing of one contact in two directions ■ Maximum distance of 120km ■ 30VDC, 0.5A relay contact (normally open) ■ Point-to-point transmission architecture ■ Plug and play design: no electrical or optical adjustments required ■ Carrier detection relay contact (normally closed) ■ LED display allows for confirmation of device operation/status *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

This is a series of asynchronous serial optical converter modems that can extend RS-232/422/485 over fiber optics.

◆RS232/485/422 optical extension modem ◆When used with the FRM220 chassis equipped with a management card, network management is possible via WEB or SNMP in-band ◆RS232/asynchronous, 3W or 5W, maximum 256Kbps ◆RS485/asynchronous, 2 wire (half-duplex) or 4W (full-duplex), maximum 1Mbps ◆Configuration via DIP switch is also possible ◆RoHS

Extending V.35/RS-232/RS-530/X.21/RS-449 with optical cables.

◆ Optical Converter Modem ◆ Supports multi-mode and single-mode ◆ SC and ST connector options available ◆ User-selectable data speeds from n×64Kbps to a maximum of 8Mbps ◆ Clock mode settings, asynchronous baud rate, loopback function supported ◆ LED indicators: Power, FiberLink, TD, RD, RTS, CTS, DCD, and Test Mode ◆ Network management via Terminal or SNMP card (only when used with FRM220-NMC-R3) ◆ Bit error rate of ≦10^-11 ◆ Can be mounted in chassis such as FRM220-CH20 ◆ Can also be implemented in standalone chassis with built-in AC power, built-in DC power, or built-in AC/DC power ◆ RoHS compliant

The 1U size allows for space-saving, enabling high-capacity long-distance transmission and reduction of fiber costs through center interconnection.

◆1RU Chassis ◆Redundant Power Supply (Rear) ◆EDFA Amplifier Module, capable of accommodating 2 slots ◆WDM Mux/Demux (CWDM or DWDM), capable of accommodating 1 slot ◆Clock Data Recovery 3R support (Re-Amplification: Re-Shaping: Re-Timing) ◆Multi-Service Support (10G Ethernet/OC192) ◆FEC Error Correction Function G.975.1 EFEC I.4/G709 GFEC ◆Management LAN 1 port, OSC 2 ports, CLI/SNMP/syslog/routing ◆1+1 Protection Function (Port switching upon LOS detection / Additional splitter required) ◆Transmission monitoring saved per port (TxRx Power/LOS/Bias) ◆Hitless firmware upgrade / Hitless reboot with no impact on actual transmission during software updates ◆L1 transmission capable of passing frames below 63 bytes or above 9,217 bytes ◆Usable from 10G1 link ◆Remote monitoring function (When paired with OTN61002 on the LH side, it allows in-band confirmation of transmit/receive power and LOS/power outage notification reception)

The 1U size allows for space-saving, enabling large-capacity long-distance transmission and reduction of fiber costs through center interconnection.

◆1RU Chassis ◆EDFA Amplifier Module capable of mounting 2 slots ◆WDM Mux/Demux (CWDM or DWDM) capable of mounting 1 slot ◆Multi-rate and multi-protocol support (Ethernet/SONET/FC/Wireless/OTU, etc.) ◆Clock Data Recovery 3R support (Re-Amplification: Re-Shaping: Re-Timing) ◆1+1 Protection function (Port switching upon LOS detection / Additional splitter required) ◆Optical Disconnection Synchronization function - Tx-sync (Turns off transmission of the same SFP when reception of the SFP is lost) ◆Optical Disconnection Coupling function - LLF (Turns off transmission of the paired SFP when reception of the SFP is lost) ◆Optical Disconnection Transparent Coupling function - TLLF (Turns off transmission of the SH side SFP of the remote connected device when reception on the SH side is lost) ◆Transmission monitoring saved for each port (TxRx Power/LOS/Bias) ◆Hitless firmware upgrade / Hitless reboot during software updates without affecting actual transmission ◆L1 transmission capable of passing frames below 63 bytes or above 9,217 bytes ◆Available for use from 10G1 link

10G OTN repeater series compatible with 2-channel multi-service.

For details about the product, please contact us directly.