Eddyfi Technologies ジャパンオフィス Official site

Eddyfi manufactured probes support all ultrasonic inspections.

Eddyfi manufactures and sells the following probes: - General linear array - For weld inspection - Small diameter - For boiler tubes - TOFD - Dual linear array for corrosion mapping - Flexible array - Wheel array - Immersion linear array - Immersion annular array - Direct contact type with protective film - TFM array - Matrix array - Dual matrix array - High-temperature compatible linear array - High-temperature compatible dual linear array - Custom solutions

The most powerful TFM imaging performance, fast approaches with real-time multi-TFM and PWI, providing a realistic inspection environment compliant with standards!

【Basic Features】 • Dimensions (H × W × D): 162 × 294 × 373 mm • Powerful channel configuration: 64/128PR phased array channel configuration and two independent 200V conventional UT channels. • More precise inspection, multiple firing modes: EMERALD's data recording utilizes Full Matrix Capture (FMC), Plane Wave Imaging (PWI), and Sparse Mode (High-speed TFM). • Onboard processing with real-time multi-TFM, quick results approach: Onboard image processing capability of over 1 million points per TFM frame and simultaneous TFM reconstruction of up to 8 channels. • Multi-channel FMC data recording capability: Capable of recording FMC data from apertures with up to 128 elements. • Excellent signal quality: Multi-stage analog amplification circuit and 16-bit resolution digitizing, achieving high signal amplification without distortion. • High-speed Ethernet, data transfer: EMERALD uses a 5Gbit/s high-speed Ethernet link for data transfer (remote connection up to 100m). • Compact and robust: Magnesium alloy IP65 sturdy casing.

A completely integrated portable flaw detection device equipped with the power to drive 64 channels and advanced features such as Total Focusing Method (TFM)!

【Basic Features】 • Dimensions (H × W × D): 343 × 278 × 158 mm • Weight (with 1 battery): 9.1 kg • Multi-touch display: 12.1 inches - 1024 x 728 pixels • Powerful channel configuration: 64/128PR phased array channel configuration and two independent 200V conventional UT channels. • High definition, higher performance: Offers a top-class "live" TFM resolution with a rate of up to 110Hz at 65,000 points per frame. If higher resolution is needed, the TOPAZ64 can generate frames with 1 million points. This is the highest resolution for portable equipment. The 12-inch high-definition multi-touch display can be operated while wearing gloves, allowing for an unprecedented quality of images. • Improved defect detection probability: Provides high energy for thick materials through bipolar pulses. • Time and cost reduction: Can record the original A-Scan waveform for compliance with record-keeping rules and offline TFM processing without repeating similar scans.

The outstanding performance brought by a compact body, the latest ultrasound examination device.

【Basic Specifications】 External dimensions (W×H×D) 298 × 220 × 159 mm Weight 6 kg Protection rating IP20 (IP54 when using accessories) Channel configuration 32:128PR, 64:64PR, 64:128PR, 256:256PR TFM option available Bipolar square pulse width 30 ns to 2,000 ns Excitation voltage up to 120V (1V step) Maximum repetition pulse frequency up to 30 kHz Gain up to 120dB (0.1dB step) Data transfer via USB3, fiber optic, or RJ45 cable with ultra-fast 10Gbit Ethernet Software compatibility with Capture, CIVA, and ULTIS Parallel connection allows up to 16 Panthers to be connected (2,048 channels) Up to 256 elements* simultaneous excitation aperture

A phased array ultrasonic flaw detector equipped with TFM and the latest adaptive ATFM features, prioritizing the voice of the user!

【Basic Features】 ■Dimensions (W×H×D): 410 × 284 × 126 mm ■Weight (with one battery): 6.4 kg ■Battery (hot-swappable): Lithium-ion, 94 Wh capacity (×2) ■Multi-touch display: 10.4 inches - 1024 x 728 pixels ■Phased array connector: IPEC connector ■Data storage capacity: 256 GB SSD, (expandable up to 1TB) ■Enclosure: IP66 design Smart Operability x PAUT software that supports everything from inspection to report generation x Intuitive UI, reduced training time, decreased operator errors x Equipped with probe and scanner database x Calibration with only 3 clicks x Compliant with international standards x Continuously improved by incorporating user feedback Applications that evolve based on field feedback x Covers multi-group welding inspection procedures x HTHA and hydrogen tank damage using TFM x Thick welds and CRA/stainless steel welds with 128 elements x Corrosion mapping x Complex inspections of nozzles and fillet welds