エスペック Official site

Check driving conditions from remote offices or home! You can manage the surroundings of environmental testing devices all at once.

**Features of Espec Online Core** ■ Centralized Management Monitor - Check the operating status and measurement values of connected devices - Up to 100 environmental testing devices, measuring instruments, network cameras, etc. can be connected - Compatible with environmental testing devices from other manufacturers - The status of connected devices is displayed in color (customizable) - The arrangement, display format, and size of connected devices on the monitor can be changed ■ Schedule Management - Manage the schedules of testing devices registered in Espec Online Core *For more details, please refer to the PDF document or feel free to contact us.*

Easily attachable to your device! It monitors/observes samples on your behalf!

【Specifications (Partial)】 <Common> ■Compatible Equipment Types: Platinus J Series, small environmental test chambers, etc. ■Usable Temperature/Humidity: -40℃ to +150℃ / 0 to 98% rh ■Interface: USB 2.0 *Cable connection (USB Type A) <Sample Observation Camera (4K)> ■Model: SUC-1100-4K ■Effective Pixel Count: 4K (3840×2160) <Tank Monitoring Camera (HD)> ■Model: SUC-0040-HD ■Effective Pixel Count: 4K (3840×2160) *For more details, please refer to the PDF document or feel free to contact us.

Significantly reduced power consumption! The Platinum J Series constant temperature and humidity controller is reliable even when operating 24 hours a day.

For more details, please refer to the PDF document or feel free to contact us.

Continuously measure the micro-resistance values of solder joints and connector connections. Efficiently evaluate the reliability of the connection parts.

■Channel configuration: 40 to 280 channels / rack ■DC current measurement method (AMR-UD) 　・Resistance measurement range: 1×10⁻³ to 1×10⁸ Ω ■AC current measurement method (AMR-UA) 　・Resistance measurement range: 1×10⁻³ to 3×10³ Ω *For more details, please refer to the PDF document or feel free to contact us.

We leverage our years of experience and achievements to provide comprehensive support for our customers' reliability testing.

Low Temperature Test / Cold Resistance Test High Temperature Test / Heat Resistance Test Temperature and Humidity Cycle Test Temperature Cycle Test Altitude Test / Decompression Test Condensation Cycle Test (Humidity and Thermal Test) Pressure Cooker Test (HAST Test) Conductor Resistance Evaluation Test Insulation Resistance Evaluation Test Vibration Test Combined Environmental Test (Temperature and Humidity + Vibration) HALT/HASS Test Salt Spray Test Salt Spray Combined Cycle Test Sand and Dust Test Chemical Resistance Test

The test environment of IEC60068.2.66 created by temperature, humidity, and pressure conditions.

The control methods include a standard type with two modes: "unsaturated control" and "wet saturated control," as well as an M type equipped with three modes: "dry and wet bulb temperature control," "unsaturated control," and "wet saturated control." The M type complies with the international standard IEC-60068-2-66. Temperature, humidity, and pressure range: +105.0 to +142.9°C, 75 to 100% rh, 0.020 to 0.196 MPa (Gauge) / +105.0 to +162.2°C, 75 to 100% rh, 0.020 to 0.392 MPa (Gauge).

Achieving uniform and highly reproducible temperature change rates, with ramp control at the sample temperature.

Temperature range: -70 to +180℃ Temperature rise and fall time (temperature change rate): -45⇔+155℃ (setting: -70℃ +180℃) Rise: within 9 minutes (23℃/min) Fall: within 11 minutes (18℃/min) Internal dimensions/External dimensions (mm): W800 H500 D400 / W1000 H1808 D1915

A lift-type two-zone test area that applies uniform temperature stress to the sample.

Temperature range High temperature exposure: +60 to +205℃ Low temperature exposure: -77 to 0℃ Internal dimensions / External dimensions (mm): W710×H345×D410 / W1100×H1885×D1965