日本フィルトレーショングループ Official site

【Exhibiting at FOOMA!】Cartridges are cleaned with ultra-pure water! Compatible with steam sterilization - Food and beverage grade Polyethersulfone GFPES series.

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 176°F (80°C) ■Maximum differential pressure: 50 PSID (3.4 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

The deep media with pleats is cartridge-structured with a continuous length thermal fusion structure! - Filter cartridge 'PP Series/PP Pleats'

【Composition Materials】 ■Filter Material: Polypropylene ■Support Material: Polypropylene ■End Cap: Polypropylene ■Center Core: Polypropylene ■Outer Support Cage: Polypropylene ■O-Rings/Gaskets: Buna, EPDM, Silicone Teflon, Capsule Viton, Viton, Teflon, Capsule Silicone *For more details, please refer to the PDF document or feel free to contact us.

The GSD series is a sheet disk with filtration aids, suitable for high-viscosity brewing liquids, sugar solutions, and tea beverages where turbidity needs to be removed.

The sheet made of cellulose and diatomaceous earth has been shaped into a disk.

Halal & Kosher compliant! We have obtained various certifications.

【Lineup】 ■ Pleated Depth Cartridge ■ Pleated Membrane Cartridge ■ Pleated High Flow Depth Cartridge ■ Two-Component Polyolefin Depth Cartridge ■ Melt Blown Polypropylene Cartridge *For more details, please refer to the PDF document or feel free to contact us.

The cartridge is cleaned with ultra-pure water! Manufactured in a cleanroom environment to maintain cleanliness and purity - Wine & Beverage Polyethersulfone.

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 176°F (80°C) ■Maximum differential pressure: 72 PSID (5.0 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

Compliance with FDA regulations! Polyethersulfone membranes provide high flux density! - Electronics-grade polyethersulfone

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 176°F (80°C) ■Maximum differential pressure: 50 PSID (3.4 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

Manufactured in a cleanroom environment! Provides excellent particle retention and cleanliness for general applications! - Nylon and zeta potential nylon 'GGHNY Series'

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 176°F (80°C) ■Maximum differential pressure: 50 PSID (3.4 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

Achieve low pressure loss and long lifespan! Provides excellent flux density and low protein binding - Polyether sulfone 'GGPES Series General Grade'

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 176°F (80°C) ■Maximum differential pressure: 50 PSID (3.4 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

Exhibits excellent hydrophobicity! Consistent removal of contaminants achieved even with erosive liquids and organic solvents - PTFE filter cartridge GGPTFE series.

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 176°F (80°C) ■Maximum differential pressure: 50 PSID (3.4 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

Additives, wetting agents, binders, and silicone-free! Consistent precision filtration prevents the drop of contaminants - two-component polyolefin 'GPB Series'.

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 176°F (80°C) ■Maximum differential pressure: 80 PSID (5.5 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

PTFE membranes provide high flow rates with low pressure loss! They minimize the extraction of ions and TOC.

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 365°F (185°C) ■Maximum differential pressure: 60 PSID (4.1 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

A multi-layer design that provides excellent processing capability while protecting the downstream sterilization-grade cartridge!

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 176°F (80°C) ■Maximum differential pressure: 50 PSID (3.4 bar) *For more details, please refer to the PDF document or feel free to contact us.

Reduce surface area and prioritize cost! Provides excellent flux density and low protein binding - Polyether sulfone GWPES series.

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 176°F (80°C) ■Maximum differential pressure: 50 PSID (3.4 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

Excellent compatibility with a wide range of chemical substances! Prevents the detachment of contaminants even when the differential pressure is high - Filter cartridge GWTB series.

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 140°F (60°C) ■Maximum differential pressure: 50 PSID (3.4 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

The material uses melt-blown polyester! It can be used at high temperatures up to 235°F/113°C - Filter cartridge PEE series.

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 235°F (113°C) ■Maximum differential pressure: 60 PSID (4.1 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.

Ideal filter cartridge for sterilization filtration and clarification of pharmaceuticals and biological solutions.

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum differential pressure: 72 PSID (5.0 bar) @ 68°F (20°C) ■Maximum temperature: 176°F (80°C) *For more details, please refer to the PDF document or feel free to contact us.

Provides optimized filtration performance! Each PPTFE cartridge undergoes integrity testing during manufacturing - Pharmaceutical grade PTFE series.

【Composition Materials】 ■Membrane: PTFE ■Pre-filtration media: Polypropylene ■Support layer: Polypropylene ■Cage/Core/Adapter: Polypropylene ■Seal: Buna, EPDM, Silicone, Viton, Teflon, Capsule Silicone *For more details, please refer to the PDF document or feel free to contact us.

To maintain high standards of cleanliness and purity! Manufactured in a cleanroom environment - PPE Pleats Series Economy Grade.

【Composition Materials】 ■Filter Material: Polypropylene ■Support Material: Polypropylene ■End Cap: Polypropylene ■Center Core: Polypropylene ■Outer Support Cage: Polypropylene ■O-Ring/Gasket: Buna, EPDM, Silicone Teflon, Capsule Viton, Viton *For more details, please refer to the PDF document or feel free to contact us.

A lineup of filter products used in various industries such as food, beverages, chemicals, life sciences, and microelectronics!

**Product Lineup Overview** ■ Pleated Cartridge The pleated design and multi-layer fiber-based filter media enable deep capture for high flow rate and high efficiency removal at small pore diameters. ■ Pleated Membrane Cartridge With extremely high removal efficiency, it can eliminate fine particles and microbial contaminants. It offers multiple media and filtration grades suitable for the most demanding applications. ■ High Flow Cartridge Utilizing a multi-layer fiber-based filter media, the larger diameter pleated design allows for excellent capture capacity at high flow rates. ■ Depth Cartridge An economical cartridge with a density gradient structure that removes deformable and non-deformable contaminants, as well as fine and coarse particles. ■ Liquid Filter Bag Liquid filter bags are available in two types: felt and mesh, with filtration precision ranging from 1 to 1500μ. ■ Filter Housing Robust structures are available not only in carbon steel but also in SUS304 and SUS316 materials. *For more details, please refer to the PDF document or feel free to contact us.*

Design and manufacturing policy = High purity! We offer a wide range of global filters.

【Lineup】 ■ Pleated Depth Cartridge ■ Pleated Membrane Cartridge ■ Pleated High Flow Depth Cartridge ■ Two-Component Polyolefin Depth Cartridge ■ Melt Blown Polypropylene Cartridge *For more details, please refer to the PDF document or feel free to contact us.

0.01μ fine retention rate! Provides excellent chemical resistance for high-purity microelectronics applications - Electronics-grade EPTFE series.

【Operating Conditions】 ■Recommended exchange differential pressure: 35 PSID (2.4 bar) ■Maximum temperature: 176°F (80°C) ■Maximum differential pressure: 50 PSID (3.4 bar) @ 68°F (20°C) *For more details, please refer to the PDF document or feel free to contact us.