We would like to introduce a new case of mixing powder and liquid using a dual-screw pump with stirring functionality (blending pump). In this case, the powder, which becomes highly viscous when mixed with liquid, can be uniformly mixed in a short time with just one pump. This simplifies the manufacturing process, which traditionally required a kneader or stirring device. Immediately after starting to add the powder, it can be observed that the powder is floating on the surface of the water. However, after 10 minutes of circulation, a thick, homogeneous liquid with high viscosity is produced. 【Case Overview】 ■ Materials Used - Liquid: Water (40°C) 6L - Powder: Pancake mix 15kg ■ Operating Conditions - Circulation through pump → piping → hopper - Operated at 180 rpm for 10 minutes - Gradually added powder to the hopper while circulating water

Fuku Tiger Metal Industry Co., Ltd. will be exhibiting at "FOOMA JAPAN 2024," held at Tokyo Big Sight, East Halls 1-8. This is one of the world's largest comprehensive exhibitions for food manufacturing, gathering approximately 1,000 companies and over 5,000 solutions across 21 categories of food manufacturing processes and an innovation startup zone. With its unmatched scale and diversity, it addresses the challenges faced by food factories in their manufacturing processes. We aim to facilitate the exchange and dissemination of technology and information related to food machinery, equipment, and related devices, contributing to the further development of the food industry. As interest in food safety and security rises, we propose a "rich future opened by food technology" through cutting-edge technologies, products, and services in food machinery. We sincerely look forward to your visit.

Fuku Tiger Metal Industry Co., Ltd. will be exhibiting at the "24th Interphex Week Tokyo" held at Tokyo Big Sight. We will contribute to your productivity with our "defoaming dual-screw pump" that resolves issues with air entrapment, and our "mixing dual-screw pump" that can stir and transport multiple liquids or a combination of liquid and powder. We will also have live demonstrations, so please be sure to stop by our booth. We sincerely look forward to your visit.

The "Deforming Pump" is a pump that realizes high self-priming (-10m) "defoaming liquid transfer" while possessing the characteristics of a two-axis screw pump, such as non-contact, shear-free, pulsation-free, and non-agitation. Since the shaft seal does not come into contact with the liquid, a mechanical seal is unnecessary. There is no contact between parts, eliminating concerns about contamination from metal powders and other substances. The need for a defoaming device is eliminated, allowing for a reduction in equipment costs. 【This solves the following challenges during food transfer】 ■ Liquid leakage and seizure occur ■ Want to reduce the risk of air bubbles and foreign matter contamination in the liquid ■ Want to eliminate filling defects and molding defects

The "Deforming Pump (VQ type)" is a dual-axis screw pump with a defoaming function that achieves high self-priming, which was considered difficult for non-contact pumps. It is suitable for transferring high-viscosity substances such as food products like miso, chocolate, and ketchup, as well as cosmetic creams, shampoos, and gels in pharmaceuticals and cosmetics. There is no contact between parts, eliminating concerns about contamination from metal powders and other materials. 【Features】 ■ Complete dry self-priming ■ High self-priming capability of -10.0m despite being a non-contact pump ■ Cost reduction achieved by eliminating the defoaming process with the defoaming device ■ Seal-less function that prevents contact at the shaft seal, reducing the risk of leaks for easily leaking liquids.

The "Blending Pump (BQ Type)" is a dual-screw pump with stirring capabilities that can mix multiple liquids while transferring them with just the pump itself. This eliminates the need for a separate stirrer (mixing process) that was required in the manufacturing process, dramatically simplifying the process by allowing a single compact pump to handle both the transfer and mixing of multiple liquids. Not only does it achieve significant cost reductions in equipment, but it also enables simultaneous liquid transfer and mixing, greatly shortening production lead times and improving production efficiency. 【Features】 - Significantly reduces production lead times and increases production efficiency - No need for stirrers or auxiliary equipment - Non-contact rotating parts - Contamination-free due to sanitary design - Capable of transferring low to high viscosity liquids while mixing uniformly

The "Radial Rubber Pump" is a self-priming stainless steel pump that draws in and discharges liquid through pressure changes in a deformed impeller (rotor). The impeller is made of rubber or silicone, which offers strong elasticity and excellent durability. The stainless steel pump casing is resistant to rust. 【Features】 ■ Self-priming with just one switch, without the need for priming water ■ Simple structure for easy handling and maintenance ■ Made of stainless steel, providing excellent corrosion resistance ■ Capable of pumping liquids mixed with slurry or viscous liquids ■ Continues to draw in even when air or gas is mixed in

The "SQWA type" is a conveyor-integrated twin-screw pump that transports solid materials without damaging their shape by integrating the conveyor and pump sections. With a slide bar specification, it allows for the mounting and dismounting of the casing without coming into contact with the screw. By eliminating the processes of compression and pushing within the pump, it can send the liquid directly to the next stage without changing its properties, making it suitable for lines that dislike changes in liquid quality. 【Features】 ■ Realizes stress-free transportation ■ Transports solids without damage ■ No change in liquid quality ■ Improved seal lifespan ■ Easy disassembly

The "SQ type" is a standard type of dual-axis screw pump. It allows for complete exposure of the wetted parts and can accommodate various cleaning methods. It can transport a wide range of fluids. In particular, during the coating process for lithium-ion secondary battery electrode manufacturing, the homogenization of electrode materials, which is crucial for determining battery performance, makes our product suitable due to its non-pulsating operation and contamination-free design. 【Features】 - Complete exposure of wetted parts, accommodating various cleaning methods - Finishing process of the inner surface of the casing is designed with cleaning in mind - Mechanical seals can be removed - Buffed finish on the outer surface of the casing to clean the surface (optional)

The "SQW type" is a pump suitable for the very difficult transfer of fluids such as ultra-high viscosity liquids and cake-like substances with low moisture content. This product enables smooth transfer of ultra-high viscosity liquids, such as dry materials with low moisture content. By attaching a screw conveyor to the suction (input) side, ultra-high viscosity materials fed from above can be smoothly transported into the pump chamber. Additionally, we also offer a "paddle-equipped twin-screw pump" that can break up and homogenize clumped materials. 【Features】 ■ Specializes in transferring materials with low moisture content that are difficult to handle ■ Equipped with a screw conveyor ■ Achieves smooth transfer of ultra-high viscosity liquids and cake-like substances ■ Capable of accommodating special applications