Free trial! On-site demo campaign for drain processing!
フクハラ
We are currently conducting an on-site demo campaign to help you experience the effects of the Drain Destroyer. For more details, please check the link below!
It is easy to confirm the clear water of the treated water! The drainage is pumped by the drainage pressure of the electromagnetic drain trap.
【Specifications (Partial)】
■ Oil concentration in treated water: 5 mg/L or less (n-hexane extractable substances)
■ Treatment method: Filter tank system
■ Operating method: Automatic operation by drain pressurization from electromagnetic drain trap
■ Vacuum method: Orifice in the strainer
■ Operating temperature: 2 to 50°C (provided that the drain water does not freeze)
■ Maximum operating pressure: 0.8 MPa
■ Capable of adsorbing and recovering CO2 contained in the drain
*For more details, please refer to the PDF document or feel free to contact us.
Large processing capacity and low processing costs! Drainage processing using a natural drop method with a non-powered device.
【Specifications (Excerpt)】
■Model: PSD8
■Applicable Compressors
・Screw: Total of 8kW or less
・Reciprocating: Total of 5.5kW or less
■Oil concentration in treated water: 3mg/L or less (n-hexane extractable substances)
■Treatment method: Filter tank system
■Maximum processing capacity: 5L/h
*For more details, please refer to the PDF document or feel free to contact us.
For advanced compressors with reduced oil consumption! Excellent overall performance.
【Specifications (Partial)】
■ Oil concentration after treatment: 3 mg/L or less (n-hexane extractable substance value)
■ Treatment method: Filter tank method
■ Number of clear water confirmation tanks: 1
■ Operating method: Automatic operation, super trap, electronic trap II, etc., to pump and treat the drain
■ Operating pressure: Strainer outlet (DO tank inlet pressure) 0.01 to 0.1 MPa
■ Maximum operating pressure: 0.8 MPa or less
*For more details, please refer to the PDF document or feel free to contact us.
Compatible with old model compressors' drains! Establishing power-free processing using the discharge capacity of the Super Trap.
【Specifications (Partial)】
■ Oil concentration after treatment: 3 mg/L or less (n-hexane extractable substances)
■ Treatment method: Filter method
■ Operating method: Automatic operation, super trap, electronic trap II, etc., to pump and treat the drain
■ Fluid temperature and ambient temperature: 2 to 50°C (drain water must not freeze)
■ Maximum operating pressure: 1 MPa
■ Inlet and outlet diameter: Rc1/2 ball valve (with Rc1/2 union)
*For more details, please refer to the PDF document or feel free to contact us.
【Specifications (Partial)】
■ Oil concentration after treatment: 3 mg/L or less (n-hexane extractable substances)
■ Treatment method: Filter tank method
■ Operating method: Automatic operation; drain is pumped for processing
■ Pump power supply/output: AC100V, 650VA (50Hz/60Hz); switchable between 50Hz and 60Hz for accumulated time
■ Operating pressure: 0.6 MPa (Pump relief valve 0.8 MPa)
■ Maximum operating pressure: 0.6 MPa
*For more details, please refer to the PDF document or feel free to contact us.