フクハラ Official site

Only the drain is reliably discharged using Fukuhara's technology! It will significantly save energy.

【Specifications (Partial)】 ■Model: DX150-1A ■Power Supply Voltage/Frequency: AC100V 50/60Hz ■Maximum Operating Pressure: 1.5MPa ■Drain Inlet Diameter: R1/2 ■Drain Outlet Diameter: Rc1/4 ■Operating Temperature Range: -20 to 50℃ ■Current Value: 0.09A *For more details, please refer to the PDF document or feel free to contact us.

The compressor starts under light load! Available in high voltage (AC400V) specifications and cold climate specifications.

【Specifications (Partial)】 ■ Main installation location: Dedicated for draining portable compressors and package-type compressors ■ Wiring method: Secondary side of the compressor power switch ■ Operation: Releases drain and air after the compressor switch is turned OFF ■ Drain removal method: Manual drain valve ■ Maximum operating pressure: 1.5MPa ■ Drain inlet diameter: G1/4B standard mounting parts included *For more details, please refer to the PDF document or feel free to contact us.

The drain discharge time is variable and can be adjusted according to the amount! The compressor starts under light load.

【Specifications (Partial)】 ■ Main installation locations: Portable compressors, built-in tanks of package-type compressors, etc. ■ Rated current: 0.09A ■ Drainage method: Manual drain valve ■ Maximum operating pressure: 1.5MPa ■ Drain inlet diameter: G1/4B standard mounting parts included ■ Drain outlet diameter: R1/4×φ8 bamboo nipple *For more details, please refer to the PDF document or feel free to contact us.

Applicable compressors from 0.75 to 37 kW! During compressor operation, regularly and reliably discharge the drain.

【Specifications (Partial)】 ■ Main installation locations: Built-in tanks of portable compressors, package-type compressors, etc. ■ Drainage method: Manual drain valve ■ Maximum operating pressure: 1.5MPa ■ Drain inlet diameter: G1/4B standard mounting parts included ■ Drain outlet diameter: R1/4×φ8 bamboo nipple ■ External dimensions: H182mm×W100mm×H141mm * For more details, please refer to the PDF document or feel free to contact us.

Best-selling product of the drain trap! Applicable compressors 0.4 to 22 kW.

【Specifications (Partial)】 ■Main installation locations: Built-in tanks of portable compressors, package-type compressors, etc. ■Wiring method ・Pressure switch type: After the secondary side of the pressure switch, secondary side of the magnetic switch ・Unloader type: Terminals after the secondary side of the compressor power switch, power from other sources is also acceptable ■Operation ・Pressure switch type: Drains for about 3 to 8 seconds (variable) each time the compressor motor starts ・Unloader type: Drains for about 3 to 8 seconds (variable) approximately every 15 minutes *For more details, please refer to the PDF document or feel free to contact us.

Easy to understand operational status with a large action lamp! Applicable compressors from 0.4 to 37 kW, energy-saving compatible.

【Specifications (Partial)】 ■Main Installation Locations - Built-in tanks of portable compressors, package-type compressors, auxiliary tanks, aftercoolers, refrigerant air dryers ■Wiring Method: Terminals after the secondary side of the compressor power switch, power from other sources is also acceptable ■Operation - Drains for approximately 2 to 60 minutes (variable) for about 2 to 20 seconds (variable) - Drains while the manual switch button (test button) is pressed *For more details, please refer to the PDF materials or feel free to contact us.

Super powerful type! The operation lamp has been enlarged, making the operational status easier to understand.

【Sensor-equipped Specifications (Partial)】 ■ Main installation locations: Air tank, air dryer, aftercooler, large air filter ■ Wiring method: Can be connected to terminals after the compressor power switch secondary side, or other power sources ■ Operation - Discharges drain for approximately 2 to 60 seconds (variable) every 2 to 60 minutes (variable) - If drain remains, the sensor intervenes to discharge the drain - While the manual switch button (test button) is pressed, drain is discharged * For more details, please refer to the PDF document or feel free to contact us.

Equipped with a powerful motor valve! Reliable, high trustworthiness, and strong against high viscosity scales.

【Sensor-equipped Specifications (Partial)】 ■ Main installation locations: Air tank, air dryer, aftercooler, large air filter ■ Wiring method: Can be connected to terminals on the secondary side of the compressor power switch, or from other power sources ■ Operation - Discharges drain for approximately 2 to 60 seconds (variable) every 2 to 60 minutes (variable) - If drain remains, the sensor interrupts and discharges the drain ■ Drain removal method: Drain is discharged only while the manual switch button (test button) is pressed * For more details, please refer to the PDF document or feel free to contact us.