All products and services
1～30 item / All 44 items
-
High-performance oil mist adsorption capture device for compressed air 'Oil Buster'
Easily and affordably make the compressed air from oil-injected compressors oil-free! Obtained "Class 0" system certification from TÜV Rheinland.
last updated
-
Air Compressor Dedicated Drain Oil-Water Separator Drain Destroyer
Easily generate water with an oil concentration of 3 mg/L or less without power. Significantly reduce drain waste disposal costs.
last updated
-
Water vapor detector
Easily connect the detector to the hose with one touch! Instantly measure the amount of water vapor.
last updated
-
Oil mist detector
Connect the detector to the hose with a single touch! The oil concentration can be measured instantly.
last updated
-
Super trap with alarm
Super powerful! A model with an alarm has been added to our best-selling drain trap products.
last updated
-
Electronic Trap II with Alarm
Energy-saving compatible! Alarm output for poor drain discharge (when the drain is not discharging properly).
last updated
-
Sterilization filter LRV≧8
It has been recognized for its performance and has received numerous awards from various public organizations!
last updated
-
Super Cyclone Separator
High separation efficiency of water, moisture, oil, and oil droplets from compressed air, no power supply required!
last updated
-
Ultra Drex 770
Compatible with 150 to 770 kW air compressors! Discharges drain reliably for a long time without air loss.
last updated
-
Dren Trap "Super Drex 610"
Compatible with 150 to 610 kW air compressors! Electromagnetic powerful drain automatic drainage device.
last updated
-
Coolant Drain Oil-Water Separation Device "Coolant Drain Bijin Water"
Treat the oil concentration in the drain to clean water with a discharge standard of 5 ppm or less, as per the Water Pollution Control Law!
last updated
-
Nitrogen gas generation device membrane separation method
Just connect compressed air! You can obtain nitrogen gas with 99% purity.
last updated
-
Nitrogen Gas Pressure Booster "MAX N2 Small Flow Booster"
Easily supply high-quality nitrogen gas at high pressure! Increase low-pressure nitrogen gas up to a maximum of 3 MPa.
last updated
-
POWER MAX PX201-4/PX201S-4 model
Only the necessary parts can be pressurized! A booster device that can be used in a non-powered specification and in an explosive atmosphere.
last updated
-
Drain Destroyer CO2 LSD Type
For advanced compressors with reduced oil consumption! Excellent overall performance.
last updated
-
Compressed air sterilization filter
The sterilization rate is an astonishing 99.999999%.
last updated
-
Leak Detector "Leak Alarm"
It can also detect gas leaks! Achieves ultra-long life due to minimal movement of moving parts.
last updated
-
Drain Destroyer CO2 XSD Type
It is easy to confirm the clear water of the treated water! The drainage is pumped by the drainage pressure of the electromagnetic drain trap.
last updated
-
Drain Destroyer CO2 PSD Type
Large processing capacity and low processing costs! Drainage processing using a natural drop method with a non-powered device.
last updated
-
Auto Air Trap
Applicable compressors from 0.75 to 37 kW! During compressor operation, regularly and reliably discharge the drain.
last updated
-
Membrane air dryer
You can obtain super dry compressed air.
last updated
-
Belt-type floating oil recovery device "Super Skimmer"
High performance with consideration for the environment! Water flow is generated inside the tank, allowing for the recovery of a wide range of floating oil.
last updated
-
Floating oil production facility
A device that creates floating oil for air compressors and reduces the oil concentration in drain water!
last updated
-
Drain Destroyer CO2 ADP/ADPL type
Utilize existing customer pits effectively! Self-priming drain processing machine with built-in pump.
last updated
-
Drain Destroyer CO2 SD Type
Compatible with old model compressors' drains! Establishing power-free processing using the discharge capacity of the Super Trap.
last updated
-
Single trap
The compressor starts under light load! Available in high voltage (AC400V) specifications and cold climate specifications.
last updated
-
Nitrogen gas generator for injection molding machines only
Nitrogen gas for measures against molding defects! Black spots, burning, yellowing, etc. can be resolved with nitrogen.
last updated
-
Double trap
The drain discharge time is variable and can be adjusted according to the amount! The compressor starts under light load.
last updated
-
Electronic Trap II
Easy to understand operational status with a large action lamp! Applicable compressors from 0.4 to 37 kW, energy-saving compatible.
last updated
-
Electronic trap
Best-selling product of the drain trap! Applicable compressors 0.4 to 22 kW.
last updated