All products and services
451～480 item / All 550 items
-
Check terminal (for logic circuits) "HT"
This is a check terminal made of RoHS2 compliant free-cutting brass (C3604BD) for logic circuits.
last updated
-
Check terminal (for signal) "HYT"
Changed the manufacturing method from blow molding (blow products) to press molding (press products), resulting in a significant increase in the softening point to 670°C. Improved dimensional accuracy. Increased color options.
last updated
-
Titan Spacer "ASTI"
It has a specific gravity of 4.51, making it very lightweight, with high strength and excellent corrosion resistance, comparable to platinum in seawater resistance. It also has good heat resistance, with a melting point of 1668°C. It is ideal for applications that dislike magnetic properties.
last updated
-
Ceramic Spacer "ARR"
Ceramic spacer made of inorganic alumina 96.
last updated
-
PTFE Spacer "ART"
The four fluorinated resin is standardized as a product using advanced cutting technology for PTFE spacers.
last updated
-
D-Sub Mounting Spacer "DSB-E"
Used as a spacer for connector installation in computers and similar devices.
last updated
-
LED Mounting Spacer "LDZ-800"
This is a RoHS-compliant, PBT-made LED mounting spacer that can be used both vertically and horizontally.
last updated
-
Peak Spacer "ASPE"
Continuous use is possible in steam at 200℃.
last updated
-
Nylon spacer "ASN"
This is a hex nylon spacer made of nylon 66 that complies with RoHS standards.
last updated
-
Aluminum spacer "ASL-E"
Excellent corrosion resistance, good machinability
last updated
-
Eco Spacer (Lead-free Brass) "ASE-N"
This is a hexagonal eco spacer made of lead-free free-cutting brass (bismuth-based) compliant with RoHS2.
last updated
-
PBT Spacer "ASZ"
This is a hexagonal PBT spacer made from a mixture of RoHS-compliant JuraneX (PBT) grades #2016 and 3226.
last updated
-
PPS Spacer "ASP"
In recent years, the alternative use of metal die casting and phenolic resin. Excellent heat resistance, chemical resistance, and flame retardant plastic.
last updated
-
Steel Spacer "ASF-E"
The material that has been used since ancient times has even better machinability than sulfur-cutting copper.
last updated
-
Stainless Steel Spacer "ASU"
This is a hexagonal stainless steel spacer made of RoHS-compliant free-cutting stainless steel (SUS303).
last updated
-
JuraCon Spacer "AS"
Lightweight, corrosion-resistant, insulated, and low-cost.
last updated
-
Brass spacer "ASB-E"
The old JIS symbol is BSBMBD. It is also known as brass.
last updated
-
Stainless Steel Full Thread (Precision Long Screw) "ERU"
This is a screw made of stainless steel (SUS303).
last updated
-
Polycarbonate Hollow Spacer "CPC"
This is a hollow spacer made of PC (polycarbonate) material.
last updated
-
SUS304 Precision Shaft (Long Size) "SRU-1200"
This is a long-sized precision shaft made from RS323 material.
last updated
-
Stacked terminal (fixed type) for 2.54mm pitch "MTS"
This is a fixed step terminal using brass in the contact section.
last updated
-
Jump socket (for circuit switching) "MJS-0605O"
You can switch circuits by combining it with the terminals for circuit switching.
last updated
-
Jumper "HJA・HJB・HJC"
There is a protective jumper for 2.54mm and 2.00mm pitch.
last updated
-
Rug terminal / L-shaped rug terminal "HRT-G"
We have prepared various shapes to meet our customers' needs.
last updated
-
Power Solder Spacer "KRB" (formerly: Terminal Mounting Base)
This is a spacer-type terminal that is mounted on the substrate by soldering.
last updated
-
Pin header JS-4 jumper 2.54mm pitch (for square pins)
A pin header refers to a general term for terminal components (pins, sockets, jumpers) that are mounted on a printed circuit board.
last updated
-
Pin header JS-7/JS-2 2.00mm pitch (for square pins)
A pin header refers to a general term for terminal components (pins, sockets, jumpers) that are mounted on a printed circuit board.
last updated
-
Pin header FSM-42 socket (square pin) 2.54mm pitch
A pin header refers to a general term for terminal components (pins, sockets, jumpers) that are mounted on a printed circuit board.
last updated
-
Pin header FSM-41 socket (square pin) 2.54mm pitch
A pin header refers to a general term for terminal components (pins, sockets, jumpers) that are mounted on a printed circuit board.
last updated
-
Pin header FSR-42/FSR-43 (square pin) 2.54mm
A pin header refers to a general term for terminal components (pins, sockets, jumpers) that are mounted on a printed circuit board.
last updated
