Thank you for always accessing the Iida Manufacturing Company website. We sincerely apologize for the inconvenience, but we will be closed for the year-end and New Year holidays during the period below. 【Year-End and New Year Holiday Dates】 From Friday, December 27, 2024, to Sunday, January 5, 2025 We apologize for any inconvenience this may cause and appreciate your understanding. For inquiries during the holiday period, please contact the respective staff members via their email addresses or use the contact form on our website. We will reach out to you again after Monday, January 6. 〈Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory〉 〒969-1204 Fukushima Prefecture, Motomiya City, Nukazawa Aza Mizukami 21-2 TEL: 0243-24-1764 FAX: 0243-64-2571

Happy New Year! Thank you for always viewing our catalog. We have been closed for winter holidays since December 27 (Friday), but we have resumed operations today, January 6 (Monday). We sincerely apologize for any inconvenience caused during the holiday period. We will continue to strive to be of assistance to our customers, so we appreciate your continued support this year. [Limited Company Iida Manufacturing, Fukushima No. 2 Factory] 〒969-1204 Fukushima Prefecture, Motomiya City, Nukazawa Aza Mizukami 21-2 TEL: 0243-24-1764 FAX: 0243-64-2571

We are pleased to announce that an article explaining our resin bearings has been published in the November 2024 issue of the magazine "Design Engineering." If you are interested, please take a look. 1. Journal Issue: "Design Engineering" VOL. 59 NO. 11 November 2024 2. Title: Resin Thrust/Radial Bearings Tōichi Noda, Atsuhiko Hoya, Shigeo Miyake Design Engineering = Journal of Japan Society for Design Engineering: Japan Society for Design Engineering Journal

Iida Manufacturing will exhibit at the "Robot Aerospace Festival Fukushima 2024" held at Big Palette Fukushima. ■ November 29 (Friday) Business Exhibition ■ November 30 (Saturday) General Exhibition This exhibition is a specialized technical exhibition that showcases products and technologies related to robot aerospace all in one place. 【Exhibits】 * PEEK gears, planetary gears, gear-in-motors, etc. * Trochoidal gears, resin bearings, etc. At the business exhibition on the 29th, there will be a special lecture by our CEO, Tohichi Nowata, on Special Stage A. Date and Time: November 29, 2024 (Friday) 15:00–15:15 Content: Resin (functional) parts as robot components and their processing methods At the general exhibition on the 30th, we will offer children the opportunity to experience remote control operation of dinosaur robots. Children who participate will receive a novelty gift, and we sincerely look forward to welcoming everyone to the event.

Iida Manufacturing will be exhibiting at the "Industrial Exchange Exhibition 2024" to be held at Tokyo Big Sight from November 20 (Wednesday) to November 22 (Friday), 2024. This exhibition aims to showcase the excellent technologies and products of unique small and medium-sized enterprises with business locations in the metropolitan area, providing business opportunities for expanding sales channels, fostering inter-company collaboration, and exchanging information. ◆ Online Exhibition November 6 (Wednesday) to November 29 (Friday), 2024, Official Website ◆ Physical Exhibition November 20 (Wednesday) to November 22 (Friday), 2024, Tokyo Big Sight West Exhibition Hall November 20 (Wednesday) and 21 (Thursday) from 10:00 to 17:00 November 22 (Friday) from 10:00 to 16:00 Our company will be showcasing resin and plastic molded products as well as machined products. We sincerely look forward to your visit.

Iida Manufacturing Co., Ltd. will participate in the "Miyagi-Fukushima Joint Business Meeting" to be held on November 19, 2024 (Tuesday) at the Tokyo Fashion Town Building. This business meeting is an event where ordering companies such as manufacturers and trading companies gather with order-receiving companies that have manufacturing bases in Miyagi and Fukushima Prefectures to engage in business discussions and information exchange. Organizer: Miyagi Industrial Promotion Organization (Public Interest Incorporated Foundation) Fukushima Prefecture Industrial Promotion Center (Public Interest Incorporated Foundation) Our company specializes in precision cutting of resins, so if you have any concerns regarding prototypes, mass production, or delivery times, please let us know. [Limited Liability Company Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-24-1764 FAX: 0243-64-2571

Our company will participate in the "Iwate Business Meeting for the 6th year of Reiwa" to be held on November 7, 2024 (Thursday) at Hotel City Plaza Kitakami. This business meeting is an event where registered companies from both inside and outside Iwate Prefecture and ordering companies from outside Iwate gather to engage in business discussions and information exchange. Organizer: Iwate Industrial Promotion Center, a public interest incorporated foundation Our company specializes in mold design and manufacturing, injection molding, and resin cutting processing, so please feel free to consult us with any concerns. [Limited Company Iida Seisakusho, Fukushima No. 2 Factory] Address: 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture 969-1204 TEL: 0243-24-1764 FAX: 0243-64-2571

Our company has completed the "Medical Device Manufacturing Registration" with Fukushima Prefecture as of September 30, 2024, and has obtained the registration certificate. Details of the "Medical Device Manufacturing Registration Certificate": Name: Iida Manufacturing Co., Ltd. Name of the manufacturing facility: Iida Manufacturing Co., Ltd. Fukushima Plant Location of the manufacturing facility: 120-2 Uenai, Shiraiwa, Motomiya City, Fukushima Prefecture Registration Number: 07BZ200115 As a result, we can develop and manufacture medical devices under commission from businesses that hold a medical device manufacturing and sales license in Fukushima Prefecture. [Contact Information (Fukushima Plant)] 120-2 Uenai, Shiraiwa, Motomiya City, Fukushima Prefecture, 969-1203 TEL: 0243-44-3013 FAX: 0243-44-3016

We are pleased to announce that our company has reached its 60th anniversary, thanks to your support. We are deeply grateful for your assistance and patronage that have made this milestone possible. In conjunction with this, we will hold a ceremony for internal stakeholders only on the date listed below, and therefore, we will be closing the entire company. We kindly ask for your understanding in this matter. Closure Date: Friday, October 18, 2024 During the closure period, please contact the respective personnel via their email addresses or use the inquiry form on our company website. We will reach out to you again after Monday, October 21. [Limited Company Iida Manufacturing, Fukushima No. 2 Factory] 〒969-1204 Fukushima Prefecture, Motomiya City, Nukazawa Aza Mizukami 21-2 TEL: 0243-24-1764 FAX: 0243-64-2571

Iida Manufacturing will exhibit at the "13th Fukushima Renewable Energy Industry Fair (REIF Fukushima 2024)" held at Big Palette Fukushima in Koriyama City, Fukushima Prefecture. This exhibition is an industrial fair led by Fukushima Prefecture aimed at realizing a renewable energy and hydrogen society, featuring lectures, various seminars, and showcasing related products and technologies. Our company will be exhibiting as part of the Fukushima Innovation Club, so please take this opportunity to visit our booth. [Our Exhibits] * Patented "PTFE and Metal Bonding" * "PEEK Gears" contributing to noise reduction and weight reduction * "Resin Bearings" using future materials, etc. We sincerely look forward to your visit.

Iida Manufacturing will be exhibiting at "Medical Creation Fukushima 2024," which will be held at Big Palette Fukushima from September 27 (Friday) to 28 (Saturday), 2024. This exhibition is a specialized technical event where companies related to the manufacturing of medical devices gather to showcase their excellent technological capabilities and products through displays and demonstrations. Iida Manufacturing will be showcasing injection-molded products and machined parts. ■ Booth Number: A-95, within the Design and Development Subcommittee booth You will be able to directly handle and view various machined parts made from different resins. We sincerely look forward to your visit.

We are pleased to announce that our company has been featured in the "Kooriyama Wide Area Agricultural and Welfare Business Cooperation Company and Organization Guide." You can also check it out through the related links below, so please take a look. Thanks to your support, we have reached our 60th anniversary. In addition to our traditional fluororesin machining, we are now able to handle mold design and processing, as well as injection molding. If you have any processing requests, please feel free to contact us through the inquiry below or via our website. We look forward to hearing from you. ▲▼▲ Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory ▲▼▲ Zip Code: 969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-24-1764 FAX: 0243-64-2571

The Ipros original "Prototyping and Contract Processing Special Feature" has been released today! We have published processing examples, so if you are interested, please check the related links! ■ Thin-walled molded products, insert molding, two-stage gears, ultra-small valves ■ Slit cut products, ultra-thin processed products, thin frame pressed products, painted products ■ O-rings, backup rings, various types of gaskets ■ Bellows, diaphragms, resin screws, special processed products ■ PEEK gears, resin bearings, various engineering plastic resin parts For mold design and manufacturing, injection molding, compression molding, and precision cutting, please leave it to Iida Manufacturing.

Iida Manufacturing will be exhibiting at "Japan Robot Week 2024," which will be held at Tokyo Big Sight from September 18 (Wednesday) to September 20 (Friday). This exhibition serves as a valuable opportunity for companies and organizations planning to enter the robotics field, addressing the recent extensive needs for industrial and service robots, as well as collaborative robots and system integrators. Iida Manufacturing will showcase resin and plastic molded products, as well as machined products. We will be displaying a comparison of PEEK gears and metal gears, so please come and see the differences at the venue. We sincerely look forward to your visit.

On August 8, 2024 (Thursday), our article titled "Production Line: Source of Competitiveness (19) Iida Manufacturing: Integrated Production of Precision Plastic Parts" was published in the "Manufacturing" section of the Nikkan Kogyo Shimbun. You can also check it out through the related links below, so please take a look. In addition to conventional fluororesin machining, we are now able to handle mold design and machining, as well as injection molding. If you have any processing requests, please feel free to contact us using the information below or through our company website. We look forward to hearing from you. ▲▼▲ Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory ▲▼▲ 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-24-1764 FAX: 0243-64-2571

Thank you very much for your continued support. We would like to inform you that our company will be closed for summer vacation during the following period. < Summer Vacation Period > From Saturday, August 10, 2024, to Sunday, August 18, 2024. We apologize for any inconvenience this may cause and appreciate your understanding. During the vacation period, please contact the respective personnel via their email addresses or use the inquiry section on our company website. We will reach out to you again after Monday, August 19. 【Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory】 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-64-2320 FAX: 0243-64-2571

Iida Manufacturing Co., Ltd. supports the activities of the Robotics Club at Fukushima Prefectural Koriyama North Technical High School for the development of future manufacturing talent and community contribution. We have recently donated a 3D printer and computers to the Robotics Club. This year's robotics competition is scheduled to be held in Tochigi Prefecture in September. We look forward to their success! Aim for the best in Japan! [Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-24-1764 FAX: 0243-64-2571

Iida Manufacturing Co., Ltd. became a corporate entity on July 1, 1964, the year of the previous Tokyo Olympics, and today marks its 60th anniversary. We are deeply grateful to have reached our 60th anniversary thanks to the support of many customers and the guidance and assistance from all of you. From now on, we would like to continue building our history under the slogan "Let's create good products with the user's perspective in mind." We look forward to your continued support of Iida Manufacturing Co., Ltd. [Iida Manufacturing Co., Ltd. Fukushima No. 2 Plant] Zip Code: 969-1204, 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-24-1764 FAX: 0243-64-2571

Iida Manufacturing Co., Ltd. will participate in the "Fukushima Corporate Collaboration Business Meeting" to be held at Big Palette Fukushima on Wednesday, July 24, 2024. This business meeting is an opportunity for ordering companies such as manufacturers and trading companies to gather with receiving companies that have manufacturing bases in Fukushima Prefecture to engage in business discussions and information exchange. Organizer: Fukushima Prefectural Industrial Promotion Center (Public Interest Incorporated Foundation) Our company specializes in precision cutting of plastics, so please feel free to share any concerns you may have regarding prototypes, mass production, delivery times, etc. [Limited Liability Company Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-24-1764 FAX: 0243-64-2571

Iida Manufacturing Co., Ltd. will participate as an order-receiving company in the Yamagata Prefecture Wide Area Business Meeting, seeking new business partners and clients. On the day of the event, we will hold discussions with companies looking for suppliers for resin processing. If you have any concerns regarding product precision, mass production capabilities, delivery times, etc., please feel free to consult with us. Organizer: Yamagata Industry Support Organization, Public Interest Incorporated Foundation In addition to the business meeting, we also accept inquiries for web or face-to-face discussions and factory tours. If you have any requests for quotes or inquiries about processing capabilities, please do not hesitate to contact us. [Limited Company Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory] 〒969-1204 Fukushima Prefecture, Motomiya City, Nukazawa, Mizukami 21-2 TEL: 0243-24-1764 FAX: 0243-64-2571

On July 12, 2024 (Friday), we will participate for the first time in the "Regional Revitalization Business Exchange Meeting 2024" held at the New City Hall in Yokohama. This event gathers companies from various fields without restricting by industry or theme, and it is a meeting aimed at creating new business opportunities and expanding sales channels through negotiations and information exchange. Organizer: Dai-ichi Life Insurance Company, Limited On the day of the event, we will also showcase sample products. Our company specializes in mold design and processing, plastic molding, and resin cutting. If you have any concerns regarding prototypes, mass production, or delivery times, please feel free to reach out to us. [Limited Company Iida Seisakusho, Fukushima No. 2 Factory] Address: 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture, 969-1204 TEL: 0243-24-1764 FAX: 0243-64-2571

Iida Manufacturing will be exhibiting at the "Healthcare and Medical Device Development Exhibition" held at Tokyo Big Sight from June 19 (Wednesday) to June 21 (Friday), 2024. This exhibition showcases components, devices, development, manufacturing technologies, and OEM services used in medical devices and healthcare equipment. 【IIDA Exhibited Products - Preview-】 - Machined resin products (resin bearings, PEEK gears, gaskets, bellows, diaphragms) - Injection molded products (insert molding, thin-walled molding) - PTFE and metal bonded products (prototype tweezers) - 3D printed products (PEEK tweezers) We will be comparing PEEK gears and metal gears, so please come and see the differences at the venue. We sincerely look forward to your visit.

Hello. This is Iida Manufacturing Co., Ltd. Our company is making donations to the "Children's Cafeteria Support Project" to support children's cafeterias that provide meals and places for children and local residents. Recently, our community support activities were recognized, and we received a letter of appreciation and a commemorative gift from the Hongu City Chamber of Commerce. We will continue to actively engage in social contribution activities so that the circle of support can expand even further. May 21, 2024 [Iida Manufacturing Co., Ltd.] 21-2 Mizukami, Nukazawa, Hongu City, Fukushima Prefecture 969-1204 TEL: 0243-24-1764 FAX: 0243-64-2571

An article about our company's "Integrated Production of Engineering Plastic Parts" was published in the Nikkan Kogyo Shimbun on May 9, 2024 (Thursday). Please be sure to check out the article through the related link. In addition to conventional fluororesin machining, we are now able to handle mold design and processing, as well as injection molding. If you have any processing requests, please feel free to contact us using the information below or through our company website. We look forward to hearing from you. ▲▼▲ Iida Manufacturing Co., Ltd. Fukushima No. 2 Plant ▲▼▲ 〒969-1204 Fukushima Prefecture, Motomiya City, Nukazawa Aza Mizukami 21-2 TEL: 0243-24-1764 FAX: 0243-64-2571

Iida Manufacturing Co., Ltd. will be closed for the following period for the Golden Week holiday. <Golden Week Holiday Period> From April 27, 2024 (Saturday) to May 5, 2024 (Sunday) We apologize for any inconvenience this may cause and appreciate your understanding. During the holiday period, please contact us using the email addresses of the respective personnel or through the inquiry section of our company website. We will get back to you after May 8 (Monday) through the relevant personnel. [Limited Company Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-24-1764 FAX: 0243-64-2571

Our company has been certified as a "Health Management Excellent Corporation 2024" in the small and medium-sized enterprise category as of March 8, 2023! 【What is a Health Management Excellent Corporation?】 The Ministry of Economy, Trade and Industry established the Health Management Excellent Corporation system in the fiscal year 2016. The Japan Health Conference evaluates and certifies corporations, particularly large and small enterprises, that practice excellent health management. We will continue to strive to provide manufacturing that is close to our customers while maintaining our health and staying bright and energetic both physically and mentally. 【Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory】 Zip Code: 969-1204, 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-24-1764 FAX: 0243-64-2571

On February 29, 2024 (Thursday), the Nikkan Kogyo Shimbun published an article about our company's technical collaboration with Fukushima University titled "Accelerating the Development of Underwater Glider Robots - Selected for F-REI Contract Research." Please be sure to check out the article through the related link. If you have any requests for resin processing, regardless of whether you are a company, university, or research institution, please feel free to contact us using the information below or through our company website. We look forward to hearing from you. ▲▼▲ Iida Seisakusho Co., Ltd. Fukushima No. 2 Factory ▲▼▲ 〒969-1204 Fukushima Prefecture, Motomiya City, Nukazawa Aza Mizukami 21-2 TEL: 0243-24-1764 FAX: 0243-64-2571

The exhibition of "PTEF and Metal Joints" has started at the Fukushima Medical Device Development Support Center. This exhibition will be open until the end of March. If you are in the area, please feel free to stop by. [Limited Company Iida Manufacturing Co., Ltd. Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-24-1764 FAX: 0243-64-2571

Iida Manufacturing will exhibit at "Technical Show Yokohama 2024," which will be held at Pacifico Yokohama from February 7 (Wednesday) to February 9 (Friday), 2024. Booth Number: [A01] Yokohama Manufacturing Zone This exhibition is one of the largest industrial technology and product comprehensive trade fairs in the Tokyo metropolitan area. This year, it will be held as a hybrid exhibition combining both physical and online displays. Iida Manufacturing will showcase processed products such as our patented technologies: "PTFE and Metal Bonding," "Resin Bearings," "PEK Gears," and "PEEK Gears." ■ Physical Exhibition February 7 (Wednesday) to 9 (Friday), 2024, from 10:00 AM to 5:00 PM ■ Website Exhibition January 15 (Monday) to February 16 (Friday), 2024 We look forward to your visit.

We express our condolences to those who lost their lives in the Noto Peninsula earthquake of Reiwa Year 6, and we sincerely offer our sympathies to all those affected by the disaster. Our company has donated financial support for disaster relief today, January 25. The donation will be delivered to the affected areas through the Fukushima Minpo Co., Ltd. Motomiya Branch and the Japanese Red Cross Society. We pray for everyone's safety and for a swift recovery. Iida Manufacturing Co., Ltd. All Employees