313/US type pump

Easy to set correctly for anyone, and compatible with a wide range of tube inner diameters!

last updated Apr 07, 2025

300/DC type pump

It has a safety device that prevents the pump from accidentally rotating when the pump head is open!

last updated May 16, 2025

313/WI type pump

It is possible to connect up to 12 channels with a single pump drive!

last updated May 12, 2025

313/DI type pump

The tube thickness is compatible with 1.6mm or 2.4mm, and the inner diameter of the tube can be installed from a minimum of 0.5φ to a maximum of 8.0φ!

last updated May 12, 2025

520/WI Pump

Regular cleaning and maintenance of the pump is not required; you only need to replace and clean the tube!

last updated Apr 07, 2025

520/DI pump

You can choose the tube thickness from 1.6mm or 2.4mm, and there are various options for the inner diameter size as well!

last updated Apr 07, 2025

505L/WI type pump

In addition to the dedicated double element tube, the tube can also accommodate two tubes for a single head pump using a parallel method.

last updated Apr 07, 2025

505L/DI type pump

In addition to low pulsation, the replacement of the dedicated tube is easy! It achieves accurate flow proportional to pump speed over a wide range of rotational speed control.

last updated Apr 07, 2025

620/WI Pump

Various flow ranges can be accommodated with combinations of tube sizes! Compatible with discharge pressures up to 0.4 MPa.

last updated May 20, 2025

620/V pump

The features are the gear ratio of the motor and the variable speed of the inverter! It demonstrates a capacity of up to approximately 8L/min.

last updated May 20, 2025

620/DI pump

The installation of the tube is very simple, and it can be done in just a short amount of time!

last updated May 20, 2025

720F/WI Pump

The closed coupling type road shear pump head 720RE is also in the lineup!

last updated May 20, 2025

720/V pump

Adopts a 720R type pump head with a planetary gear 4-roller system! Easily enables variable speed for the pump.

last updated May 20, 2025

720F/DI pump

It is also possible to manufacture a dual pump head specification (720R/RX, 720RE/REX)!

last updated May 20, 2025

Variable flow pump *Speed adjustment is possible in 0.1 rpm increments.

This is a product that meets the needs in fields such as pharmaceutical manufacturing, chemical analysis, and food processing, where precise fluid control is required. *Various data sheets are currently available!

last updated May 23, 2025

LabT/KT15 type pump

The tube thickness is 1.6mm, suitable for four different inner diameter sizes! It meets various flow requirements.

last updated Jan 21, 2026