We exhibited at the "Mechanical Components Technology Exhibition" held from June 24 to 26. With the concept of "Surface Treatment Consultant," we introduced surface treatment technologies such as Dycron, electroplated nickel, non-stick coatings, carbide metal thermal spraying, and ceramic lining, among others.

We exhibited the KAMATA clean booth at INTERPHEX JAPAN held from July 1 to 3. We showcased a double-layered clean booth with dimensions of 2000×2500×3000, a low-cost and lightweight machine cover using an original aluminum frame, and other solution examples.

We will be exhibiting the KAMATA aluminum frame at the 2009 Japan International Packaging Machinery Exhibition, which will be held from October 20 to 23. ■Details Dates: October 20 (Tuesday) - 23 (Friday), 10:00 AM onwards Venue: Tokyo Big Sight, East Exhibition Hall Our Booth: East 3, No. 3D-32 ■Exhibited Products: Cover and booth-specific KAMATA aluminum frames Clean booth (2500x2000xH3000) Machine cover (1500x600xH2000) Safety cover (1200x500xH1000) Please be sure to visit our booth.

We will be exhibiting the KAMATA clean room at the 23rd INTERPHEX JAPAN, which will be held from June 30 to July 2. ■ Details Date: June 30 (Wednesday) to July 2 (Friday), 2010, 10:00 AM onwards Venue: Tokyo Big Sight, East Exhibition Hall 4 Our Booth: 52-4 ■ Exhibited Products: Constant temperature and humidity control equipment (achieving 40% energy-saving effect) KAMATA clean room Please be sure to visit our booth.

We exhibited at INTERPHEX Japan held from June 30 to July 2. This time, we showcased a clean room using a constant temperature and humidity control system instead of the KAMATA aluminum frame method. "Achieved 40% energy savings at 23°C and 50% humidity!" We adopted a dew point saturation method that does not use a humidifier, resulting in significant energy savings.

A double-layer clean booth with dimensions of 2000×2000×height 2500 has been installed, along with temperature, humidity, and cleanliness management. We propose an optimal clean environment when you want to locally increase cleanliness or enhance airtightness. As a new product, we also showcased an emergency shower booth. This device is used as a first aid measure to wash off harmful chemicals that may have come into contact with the human body.

We will be exhibiting at the "Good Job Creation" Fair to be held on November 1st (Thursday)! Date: November 1, 2012 (Thursday) 10:00 AM - 6:00 PM Venue: Tokyo Dome, Gate 22 Our Booth: B-15 Exhibits: KAMATA Clean Booth (Aluminum Frame Sample) Various Surface Treatment Samples Please stop by! We look forward to seeing you. (^^♪

We will be exhibiting at the "International Powder Technology Exhibition Tokyo 2012" held from November 28 to 30! At our booth, we will introduce explosion-proof solutions for dust explosion prevention and wear-resistant solutions focused on ceramics. Event Dates: November 28 (Wednesday) to 30 (Friday), 2012, 10:00 AM to 6:00 PM (until 5:00 PM on the last day) Venue: Tokyo Big Sight, East Hall 3 Our Booth: Manufacturing and Process Equipment Zone S-05 Exhibits: - KAMATA Clean Booth (actual product) - Achievement Miniatures - Various Surface Treatment Samples: Ceramic Double Tubes, Ceramic Chips & Pate Lining, Dyneon, PEEK Coating, Non-Stick Coating During the exhibition, we plan to distribute case studies of solutions from various industries. We look forward to seeing you there! (^^)/

We will be exhibiting the KAMATA clean booth at INTERPHEX JAPAN, which will be held from July 1 to 3. ■Details Date: July 1 (Wednesday) - 3 (Friday), 2009, 10:00 AM - Venue: Tokyo Big Sight, East Exhibition Hall Our Booth: East 3, Sterilization and Clean Zone, No. 2-4 ■Exhibited Products: KAMATA Clean Booth (2500x2000x3000H) Particle Counter Low-Emission Sheet Shutter Aluminum Frame Equipment Cover Introduction of other solution examples Please be sure to stop by our booth.

We will be exhibiting surface treatments such as Dychron coating at the 【Mechanical Elements Technology Exhibition M-tech】 held from June 24 to 26. ■Details Date: June 24 (Wednesday) - 26 (Friday), 2009, 10:00 AM onwards Venue: Tokyo Big Sight, East Exhibition Hall Our Booth: East 6, Surface Treatment and Modification Fair No. 35-11 ■Exhibited Products: Dychron, Blastron, and other surface treatments recommended by Kamata Industries (thermal spraying, ceramics, etc.) Please be sure to visit our booth.

At the 2009 Kumamoto Business Industry Fair, we exhibited the KAMATA Clean Booth, machine covers, and surface treatment [Dykron coating]. *This fair is held with the aim of supporting exchanges between invited companies and local businesses through collaboration among industry, academia, and government, focusing on parts procurement, personnel dispatch, technical cooperation, and market expansion, thereby revitalizing the regional economy. (Approximately 100 companies from manufacturing industries such as automotive, semiconductor, solar, IT, bio, and environmental sectors participated.)

We exhibited the KAMATA clean booth at the Fine Tech Japan held from April 15 to 17. We installed a double-layer clean booth with dimensions of 2000×2500×height 3000, which we introduced for the FPD industry. ■ KAMATA Photo Gallery ↓ ↓ ↓ http://www.kamata.co.jp/html/recruit/recruit_03.html ■ A report on the exhibition is currently posted on the sales staff blog. ↓ ↓ ↓ http://www.kamata.co.jp/html/blog_eigyo/ If you have any comments or questions, please feel free to contact us. We look forward to hearing from you.