ケツト科学研究所 Official site

Moisture management from raw material polished rice is essential for improving the quality of rice flour. The average value of measurement results up to 9 times is displayed. One device can switch between measuring rice flour and polished rice.

1. Easy operation: Measurement is simple. Just set the sample in the dedicated sample dish, turn the handle, and press the measurement button. Measurement results can be obtained in just a few seconds. 2. It is possible to measure the moisture content of rice flour and polished rice. With a single selection button, you can switch between measuring rice flour and polished rice. 3. The display screen is equipped with a backlit LCD, allowing for use in dark places. 4. It features an average value display function, which can show the average of measurement results up to 9 times. *For more details, please download the catalog or contact us.

Broken rice (fragments) and rice with cracks can cause mushiness during cooking. Measure the ratio to prevent this in advance.

- Simply spread the brown rice on the tray for visual inspection. - High-speed assessment of 1000 grains in about 40 seconds. - Accurate results through three imaging sessions and a newly developed image engine. - Measurement of grain quality, including grain count, length, width, and area for each grain. - Measurement targets: Non-glutinous brown rice, non-glutinous white rice (excluding low amylose rice, etc.) *Non-glutinous white rice is optional. - Assessment items: Non-glutinous brown rice: whole grains, white immature grains, colored grains, dead grains, cracked grains, broken grains, odd tea grains, foreign matter, etc. **The assessment content and display items may vary depending on the settings. Non-glutinous white rice (optional): normal grains, powdery grains, mixed grain grains, colored grains, broken grains, damaged grains, cracked grains, small broken grains, etc. - Number of grains measured: 800 to 1200 grains. - Measurement time: Approximately 40 seconds per 1000 grains (varies by grain type and variety). Approximately 16 seconds per 1000 grains (when using the data logger software "RDL-01." Varies by grain type and variety).

Non-destructive measurement of moisture, protein, and amylose in brown rice and white rice! Introduction of a component analyzer.

【Specifications (Excerpt)】 ■ Measurement Method: Transmissive Near-Infrared Spectroscopy ■ Light Source: Tungsten Lamp (Lifespan 20,000 hours) ■ Measurement Targets: Brown Rice, White Rice ■ Measured Components: Moisture, Protein, Amylose (Reference Value) ■ Sample Volume: Approximately 60 mL ■ Calibration Curve Memory: 4 Components × 8 Channels ■ Measurement Time: Approximately 40 seconds *For more details, please refer to the PDF document or feel free to contact us.

In petri dishes, in plastic bags, in bottles, or placed directly. Simplifying the entire measurement process with various sampling methods and non-destructive measurements!

◎Measured in 7 seconds [before] With a heated moisture meter, the measurement time takes about 10 to 30 minutes. When there are many samples, a lot of time is spent just on measurements. [after] Using near-infrared light for moisture measurement, one measurement takes just 7 seconds! ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ ◎Diverse Sampling [before] Before starting measurements, tasks such as using a dedicated case, grinding, and adjusting the distance between the sample and light source arise. [after] In addition to the included petri dish, you can choose convenient sampling methods such as poly bags, vials, poly sheets, or direct placement. Since light is evenly applied from the bottom, distance adjustment is unnecessary. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ ◎Non-destructive Measurement [before] It's a waste for precious samples or large quantities of measurements. Cleaning up, such as disposing of waste or washing sample dishes, becomes a hassle. [after] Since it is a non-destructive measurement, the samples can be used as they are after measuring. Choosing a sampling method means no cleanup is needed. *Please check the catalog PDF for detailed specifications. *Creating a calibration curve is a measurement condition. *We have a demo unit available for confirming measurement feasibility/accuracy.

High functionality at a low price. Measurement of 4 components in just a few seconds. The sample container offers high flexibility, and measurements can be taken without any pretreatment.

《Measurement Method》 Near-infrared bottom surface light reflection type 《Spectral Method》 Filter spectral method 《Measurement Spot》 Approximately 25mm in diameter 《Number of Channels》 50 (1CH × 4 components simultaneous measurement) 《Measurement Time》 Normal measurement 7 seconds (varies by setting), continuous measurement 0.5 seconds cycle 《Display》 Organic EL display 《Input/Output》 USB (PC input/output), RS-232C (printer output), LAN 《Light Source》 Tungsten lamp 《Dimensions》 415 × 370 × 230mm 《Weight》 12kg 《Accessories》 Light shield cover, sample cell (glass dish φ90mm), sample cell holder, calibration plate, power cable, spare fuse, wireless LAN router, PC software, instruction manual *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Minimize the effort required for moisture measurement! Maximize the efficiency of moisture management!

◎Real-Time Measurement [before] With a heated moisture meter, the measurement time is about 10 to 30 minutes. Adding preprocessing takes even more time. [after] Moisture measurement using near-infrared light, with measurements as fast as every 0.5 seconds! ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ ◎Non-Destructive & Non-Contact Measurement [before] Destructive tests such as heating and grinding. It's a waste for valuable samples or large-scale measurements. [after] Measuring samples flowing on the line by shining light from above. This reduces the amount of discarded samples, making it more efficient. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ ◎Collaboration with Peripheral Equipment [before] Responding to moisture anomalies requires waiting for measurement results. Human eyes are needed to confirm and judge measurement values. [after] Connecting to peripheral equipment via PC output or 4-20mA current output. Smooth collaboration for responding to anomalies, such as with buzzers. *Please check the catalog PDF for detailed specifications. *The ability to create a calibration curve is a measurement condition. *We have demo units available for confirming measurement feasibility and accuracy.

A detailed illustrated explanation of the basics of "moisture meters" that you can't ask someone about now! Free booklet giveaway!

【Kett's Infrared Moisture Meter Lineup】 ■ Infrared Moisture Meter "FD-800" 　◎ Direct reading of sample temperature with a radiation thermometer 　◎ Full-spec top model ■ Infrared Moisture Meter "FD-720" 　◎ Equipped with a high-performance mass sensor with high durability 　◎ Various measurement modes ■ Infrared Moisture Meter "FD-660" 　◎ Easy and simple standard device 　◎ Illuminated keys to indicate the device's status *For more details, please download the brochure or contact us.

A heater that emits more than twice the infrared radiation of conventional products achieves improved drying efficiency! Equipped with two measurement modes: "Automatic Stop Mode" and "Time Stop Mode."

An infrared moisture meter with a low environmental impact organic carbon heater, now featuring new functions such as a PreHeat mode for stable measurements. 【Features】 ○ Two types of measurement modes: "Auto Stop Mode" and "Time Stop Mode" ○ Built-in high-performance electronic balance with an "Auto Tare Mechanism" that allows zero point adjustment during measurement ○ Large stainless steel sample dish with a diameter of 110 mm ○ Pre Heat mode to eliminate measurement errors ○ Data memory function capable of storing and outputting 50 measurement data points ○ Environmentally friendly organic carbon heater adopted *For more details, please download the catalog or contact us.

Standard yet multifunctional and highly accurate! For quality control departments and inspection departments that require advanced moisture management. Capable of displaying with high precision of 0.01%.

■□■Features■□■ ○ Heating drying and mass measurement method most similar to standard drying method. ○ High-precision aluminum integrated mass sensor "Uniblock" adopted. ○ New type of auto tare mechanism adopted. ○ Optional data logger software "KDL-01" available. ○ Medium wavelength infrared quartz heater used as the heat source. ○ Six types of measurement modes available to meet various measurement requirements. ○ Up to 10 types of measurement conditions (drying temperature, measurement mode) can be registered and saved. ○ Displays the amount of moisture change (△M) over 30 seconds in both numerical and scale format. ○ Can be connected to an optional printer. ○ Calibration of the mass sensor is possible. *For more details, please download the PDF or feel free to contact us.*

This is a whiteness meter for measuring the degree of whiteness ("whiteness") of rice, including brown rice, polished rice, and washed rice. The measurement method is simply to insert the sample case containing the sample into the measuring section!

【Features】 ◆ Lightweight and Compact → Compared to the conventional model C-300, the device is 3 kg lighter and 23.5 cm shorter in depth. ◆ Eco-Friendly Design → Uses blue LEDs as the light source. → Extends the lifespan of the light source and reduces power consumption and heat generation. ◆ Immediate Measurement Capability → Shortened time for sensitivity adjustment after startup. → Measurement can start in as fast as 20 seconds after powering on. ◆ One-Click Sensitivity Adjustment → Sensitivity can be confirmed by measuring the included whiteness standard plate. → Sensitivity adjustment, which was required for each measurement in the conventional model, is unnecessary in the C-600. → The device will notify only when adjustment is needed. → During adjustment, simply select the standard plate and click a key for automatic sensitivity adjustment. → No cumbersome adjustments required. ◆ Easy Maintenance → The front cover that covers the glass filter can be removed easily by lifting it, featuring a simple structure. → Cleaning is very easy. *For more details, please contact us or refer to the catalog.

Measurable in about 20 seconds from startup! Simply insert flour, buckwheat flour, starch, sugar, chemicals, talc, lime, cement, etc. into the measuring section to display whiteness.

An eco-friendly device that can measure with a small body, minimal samples, and low power consumption. It has been completed to meet the demands of an eco-friendly era. *For more details, please download the PDF or feel free to contact us.

Developed as a measurement device specialized for soba, adopting a "high-frequency capacitance method" that measures and calculates the mass, temperature, and high-frequency capacitance of the sample to display the moisture content!

【Features】 ○ No sample pretreatment required → A certain amount of buckwheat, buckwheat groats, or buckwheat flour can be poured directly into the measuring section. ○ Since the amount of sample introduced at one time is relatively large, the influence of moisture variation between grains is minimal, allowing for highly reliable measurements. ○ The built-in mass meter is sensitive to vibrations, enabling zero-point adjustments during sample introduction and displaying the sample introduction icon at the optimal timing. ○ Easy to understand for anyone, allowing for accurate measurements with confidence. ○ Quick and simple moisture measurement. ○ Options → Printer VZ-330 → 200g standard weight *For more details, please contact us or download the catalog.

Measures the moisture content of various samples such as powdered samples, paper, boards, and food products. Equipped with a data output terminal to accommodate a variety of measurement conditions.

■□■Features■□■ ● Wide measurement range accommodating various measurement targets. ● Equipped with data output terminals to support diverse measurement situations. ● Data memory function. ● Simple calibration curve creation function. ● Comes with standard sensors and offers various optional sensors. ■Measurement Method: Electrical Resistance ■Measurement Targets Samples such as solids, powders, and sheets (excluding substances containing electrolytes) ■Display Range: 1 to 99% ■Resolution: 0.1% ■Measurement Range: Resistance Value: 10KΩ to 900MΩ, Moisture Value: Varies by sample ■Measurement Accuracy: Varies by sample ■Display Method: Digital (LCD) ■Operating Temperature Range: 0 to 40℃ ■External Output: RS-232C Interface *For other functions and details, please download the catalog or contact us.*

Simply by placing each sample between the sensors, measurement starts automatically, and the moisture value is displayed in just about one second! This is useful not only for the drying process but also for quality inspection before shipment.

【Features】 ○ Compatible with various types of dried noodles such as somen and hiyamugi ○ Easy to operate → Simply insert each sample into the sensor for automatic measurement, with moisture values displayed in about one second ○ Convenient handheld type → Can be brought to the drying process site for on-the-spot moisture measurement ○ Usable for quality inspection before shipment ○ Constant pressure parallel electrode sensor → The force applied to the sample is always kept constant, reducing measurement errors caused by variations in measurement actions → Stable measurement values can be obtained regardless of who performs the measurement ○ Upper and lower limit setting alarm function → Set any moisture range, and a buzzer will sound if the measured moisture value falls outside the set range ○ Auto power-off function → Automatically turns off the power if no measurements or key operations are performed within the set time → Prevents unnecessary battery drain → The set time can be configured from 1 to 10 minutes in 1-minute increments *For more details, please contact us or refer to the catalog.

Visually distinguish between glutinous rice and sake rice with split grains! It can also be used with non-glutinous rice. The dual power supply system allows you to choose any location for inspection.

With this device, by shining light with a wavelength of 500 to 750 nm on each grain of brown rice, it has become possible to visually distinguish split grains, which was previously difficult (patent pending). When viewed through the built-in magnifying glass, the distinction is clear and even easier to identify. This device is a jointly developed product with the National Agriculture and Food Research Organization (NARO) Food Research Institute. *For more details, please download the PDF or feel free to contact us.

Efforts have been made to ensure that the background of the sample turns blue, allowing for clear identification of the characteristics of white rice and brown rice. *Includes sample dish and magnifying lens.

■□■Features■□■ ■Light is transmitted through the back of the sample to observe its shape and color. ■Includes a sample tray that can be rotated while checking the angle, as well as a magnifying lens. ■Designed to create a blue background for the sample, allowing for clear identification of the characteristics of polished and brown rice. ■Applicable samples: polished rice, brown rice. ■Light source: 4W fluorescent lamp, daylight color (ZLP-701). ■Operating temperature: 10 to 40°C. ■Storage temperature: 0 to 40°C. ■Power supply: 4 AA alkaline batteries or AC 100V (50/60Hz). ■Output: DC6V 0.5A. *For more details, please download the PDF or feel free to contact us.

Moisture activity measurement device from Swiss Accel. Comes standard with software to connect to a computer for recording and graphing measurement values! Easy data management.

This model comes with a temperature control device, allowing for speedy and high-precision measurements. It is equipped with software that connects to a computer for recording measurement values and creating graphs, making data management easier (available for the top two models only). It complies with the Food Sanitation Act, Notification No. 54. ■ Measurement method: Electrolyte electrical resistance humidity sensor ■ Measurement range: Water activity: 0.03 to 1.00 Aw ■ Measurement accuracy: Water activity: ±0.002 Aw, Temperature: ±0.2℃ (at 25℃) ■ Display method: Digital *For more details, please download the PDF or feel free to contact us.