We will be exhibiting at the "Construction Technology Exhibition 2022 Kinki" from November 9 (Wednesday) to November 10 (Thursday)! [Ended]

ケー・エフ・シー

Our company will be exhibiting at the "Construction Technology Exhibition 2022 Kinki," which will be held from November 9 (Wednesday) to November 108 (Thursday) at Intex Osaka, Zone C, Hall 6. The exhibition serves as a platform to showcase and introduce new technologies and methods developed by private companies, facilitating interaction among industry, academia, and government. Our aim is to further enhance the construction technologies that have been cultivated thus far, promote broader technological development, and encourage the active utilization of new technologies in various projects. We sincerely look forward to your visit.

Date and time Wednesday, Nov 09, 2022 ～ Thursday, Nov 10, 2022
09:30 AM ～ 05:00 PM
The last day is until 16:30.
Capital ■Venue: Intex Osaka, Hall 6, 3rd Floor, Zone C ■Address: 1-5-102 Minamikoube, Suminoe-ku, Osaka City ■Access: 　・From Cosmo Square Station (Chuo Line), a 9-minute walk from exits 3 and 4 　・From Nakafuto Station (New Tram), a 5-minute walk from exit 2
Entry fee Free

Related product information

Non-destructive testing machine "Anchor Checker"
Inspection is possible just by placing the probe on the designated part of the anchor! A non-destructive testing device that can inspect and determine the bonding condition of post-installed anchors.

Main Body: Transmission and Reception Device Type: Frequency Automatically Variable, Ultrasonic Pulse Echo Method Variable Frequency Range: 3MHz to 5MHz Maximum Detection Distance: 1000mm External Dimensions: 275mm ✖ 240mm ✖ 115mm Probe: For Metal Anchors, Half-Moon Shape, 5MHz For Adhesive Anchors, Disc Shape, 5MHz *For details, please download the PDF or contact us.
Preventive maintenance technology "Fail-Safe System"
We propose a system that excels in construction and inspection capabilities to prevent third-party damage caused by falling objects!

【Optional Items】 ■Shackle ■Thimble ■Stainless Steel Wire ■Stainless Steel Sleeve ■Simple Lock ■Scrum Clamp (SC) *For more details, please refer to the PDF document or feel free to contact us.
Gainatunnel interior sheet [Registered in NETIS]
A tunnel interior sheet that can be applied simply by peeling off the release film and sticking it on with adhesive.

【Main Performance】 - Peel adhesion (JIS Z 0237) at peel angles of 90 degrees and 180 degrees: 8N/24mm or more - Flame retardancy (NEXCO Test 738): Flame extinguishing time under 30 seconds, upper edge burn spread within 600mm - Gas toxicity (Building Standards Act notification): Mouse behavior cessation time of 6.8 minutes or more - Initial reflectivity (JIS Z 8722): 60% or more - Liquid resistance: 5% nitric acid, 5% sulfuric acid, saturated calcium hydroxide, 3% sodium chloride; immersion for 30 days with no blistering, cracking, or peeling - Weather resistance (JIS K 5600) using xenon lamp method for 1200 hours with no blistering, cracking, or peeling 【Construction Flow】 1) Substrate preparation 2) Layout marking 3) Primer application 4) Sheet installation (including edge sealing) 【Guidance Line】 - Sheet for guidance line with a width of 20cm
Saber EX Lock Bolt
The expansion-type rock bolt made of reinforcing steel pipes developed by K.F.C. Co., Ltd. contributes to the longevity of tunnels.

When high-pressure water is injected using a dedicated high-pressure water injection system, the expansion section of the rock bolt inserted into the ground expands along its entire length and becomes anchored in the ground. By providing a male thread at the mouth, it becomes possible to tighten the lining concrete with a nut, which is expected to enhance the effectiveness of ground support. 【Accessories】 Injection adapter High-pressure water injection system for expansion Anti-loosening nut "K nut" Pipe for lining concrete protection Multi-functional G type (tip cap detachable type)
Heavy Metal Adsorption Sheet for Soil Contamination Measures "Padem Sheet"
Making the adsorption layer method simpler. No need for mixing work or quality control of the adsorption layer on site. Construction of slopes is also easy.

The "Padem Sheet" is a jointly developed product by Toppan Printing Co., Ltd. and ES Research Institute, Inc. It is a sheet filled with the adsorbent "Interface SMV#IR," which adsorbs harmful substances such as arsenic and selenium contained in the soil. In the adsorption layer method that adsorbs and processes heavy metals, it is used as a substrate for the soil instead of the adsorption layer. 【Standard Construction Procedure (When Installing One Layer)】 1. Ground leveling 2. Installation of protective mat (side facing the base) 3. Installation of Padem Sheet 4. Installation of protective mat (side facing the excavated material) 5. Transportation and leveling of protective soil *For more details, please refer to the materials. Feel free to contact us with any inquiries.
SR Injection Capsule
Inorganic injection-type anchor

The SR injection capsule is a capsule containing special cement that is immersed in water to create a properly water-ratio mortar for setting. It is an inorganic injection-type anchor that can be filled into drilled holes by using a dedicated cartridge.