The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "VNP" and "DSP" series have powerful cleaning capabilities and are suitable for cleaning filter presses, removing dirt from conveyors, and cleaning equipment and parts. Both spray nozzles use ceramic chips in the nozzle area that are resistant to wear under high pressure, allowing for reduced nozzle wear during use. Furthermore, the DSP series can be used up to 20 MPa, providing a sharper, razor-like thin and strong impact for cleaning.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "SR" series nozzles can be used in high-temperature environments up to 150°C, automatically rotating with the force of the cleaning liquid, providing powerful 360° cleaning without external power. The "SR" series rotates at low speed, thoroughly cleaning the tank. Designed for heat resistance, it can handle the cleaning of stubborn dirt by spraying high-temperature cleaning liquids, thereby reducing work time. The automation of the tank cleaning process, which was previously done manually, significantly reduces labor and time, enabling efficient and stable cleaning operations.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "AWACart" series features nozzles compatible with both gun and lance types. It delivers foam to high places and intricate parts of equipment for disinfection and cleaning. This spray unit is suitable for cleaning food equipment and factory walls. There are two types of spray components: a gun type for thorough cleaning at hand and a lance type suitable for high-altitude cleaning. Additionally, the foam can be adjusted to three consistencies (liquid, cream, mousse), and by changing the nozzle tip, the spray pattern can be switched between a fan type (standard specification) and a straight type. It also includes a liquid level gauge that allows for easy visibility of remaining liquid. The cart type makes it easy to move, and with its user-friendliness and convenience, it is a foam cleaning spray unit that can cater to the entire factory.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "CP-STB" series features strong impact force and high straight flow with excellent rectification, making it suitable for high-pressure washing and trimming. It incorporates a rectifier within the conventional CP series, maintaining straight flow even in curved piping where turbulence is likely to occur. With high rectification, it achieves long-distance straight flow even in lateral spraying. This straight nozzle suppresses spray turbulence and demonstrates strong impact force.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "JJA" and "DOVVA-G" series spray slurries and waste liquids with a uniform particle size, achieving improved efficiency in wastewater combustion. Made from high-temperature resistant materials, the "JJA" and "DOVVA-G" series are designed with a large foreign object passage diameter, making them less likely to clog and suitable for spraying slurries and filtrates containing debris and impurities. With a uniform particle size and stable spraying without unevenness, they enhance the efficiency of wastewater and waste liquid combustion treatment.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "Outdoor Unit Cooling System" and "Intake Cooling System" improve the increase in power consumption of cooling equipment and the decrease in power generation efficiency of gas turbines that occur during extreme heat. In heat exchange mechanisms and power generation equipment that utilize outside air, efficiency decreases due to rising temperatures in summer. The "Outdoor Unit Cooling System" increases the heat exchange rate by cooling the outdoor unit, making it possible to reduce power consumption by approximately 10%. Additionally, it can also lower electricity costs by cutting peak demand values. The "Intake Cooling System" cools the air at the intake and just before the gas turbine, lowering the intake temperature and recovering approximately 3% of output.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. By miniaturizing equipment, we contribute to reducing manufacturing costs. We also contribute to cost optimization from production to operation through energy savings and air conservation.

The industrial spray nozzle manufacturer, IKEUCHI Co., Ltd. (Kiri no IKEUCHI), has published a new page. Various spray nozzles, air nozzles, and unit products are available for trial use. Please use this as a guideline for selecting effective nozzles before introducing them into your equipment. This service is aimed at customers in Japan who are considering a purchase, allowing them to experience the usability that may not be easily understood through our website or catalog, ensuring they are satisfied before making a purchase. Many of our products are eligible, including single-fluid spray nozzles, dual-fluid spray nozzles, air nozzles, tank cleaning nozzles, spray nozzle units, and spray guns. A free loan period of up to 15 days is available (shipping costs to be borne by the customer).

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "EJX" series effectively stirs solutions with powerful liquid injection, reducing concentration variations within the tank. It is also effective in promoting etching and plating. By ejecting 3 to 4 times the supply volume of liquid and generating strong stirring flows within the liquid, it achieves concentration uniformity and prevents sedimentation. Materials are available in metal and resin, and you can choose the optimal specification from three types: single-direction spray, dual-direction spray, and slit type.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "COOLJetter" series is a device that allows for easy cooling and dust control from narrow spots to wide spaces using a mist fan. "We are responding to concerns in the field such as 'workers suffering from heat-related illnesses,' 'the heavy burden of air conditioning power consumption,' and 'the difficulty of managing dust and heat.'" By spraying ultra-fine dry fog, there is no worry about equipment or products rusting, allowing for comfortable cooling and dust suppression, while simultaneously achieving cost-effective improvements in the work environment and energy savings.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "CLJ-CSA" significantly lowers the perceived temperature with its mist cooling effect. It is an easy and quick-to-use cooling device that is effective for heat countermeasures in workplaces and open spaces. The generated mist is extremely fine, allowing it to be used without worrying about wetting or rusting equipment and products. The product is a cart-type mist fan that integrates a fan with a swivel function, a pump, and a tank, and it can be used immediately by simply plugging it in. It is equipped with casters for easy portability, making it usable in various locations.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "RJ3-MD" series is a motor-driven automatic cleaning nozzle that reliably removes dirt with high cleaning power. It is available in both low-pressure and high-pressure specifications. This motor-driven rotating cleaning nozzle can be selected from two types: air motor and electric motor, providing powerful cleaning performance with stable low-speed rotation. A new low-pressure specification nozzle has been added to the lineup, offering a rich flow rate approximately three times that of the high-pressure specification for cleaning.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "RJ" series is a tank cleaning nozzle that provides powerful 360° cleaning without external power. A new compact, high-pressure type has been added to the lineup. Subtitle (SSCO similar page) Despite its small size, the powerful "RJ" series effectively cleans stubborn and caked-on dirt with a straight water flow, allowing for efficient automation of tank cleaning tasks. In addition to the conventional low-pressure type, a new high-pressure type has been added to the lineup. Its compact size makes installation in equipment easy.

The industrial spray nozzle manufacturer, IKEUCHI Co., Ltd. (Kiri no IKEUCHI), has published a new page. The "SWB" series features a simple structure that is easy to handle and is suitable for CIP cleaning of tanks and reaction vessels. Connections can be selected between screw and pin types, and in addition to the standard stainless steel 316L, a chemical-resistant PTFE option is also available. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "JAN" series features a conical air nozzle that sprays at an angle of 70° in a circular pattern of 135mm, allowing for air blowing over a wide area with just one nozzle. It is suitable for gas purging and air purging applications, achieving a reduction in the number of nozzles needed in processes that previously required multiple conventional nozzles, contributing to the simplification of equipment and space-saving. Additionally, its compact size allows for easy integration into existing equipment. This product is ideal for shortening work time and creating efficient production environments.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "RJ3-MD" series features low-speed rotation, ensuring straightness is not disturbed, and is a motor-driven automatic cleaning nozzle that effectively removes dirt with high cleaning power.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "PON" series is a push-out type rotating cleaning nozzle that powerfully cleans ducts, tanks, and the interiors of pipes. It is easy to detach and maintain. When not in use, it is stored so that the installation part is flush with the wall, and only the nozzle part protrudes and rotates during cleaning. It rotates at a low speed, applying strong pressure across the entire surface, demonstrating high cleaning power and effectively cleaning the entire interior of ducts, pipes, and tanks.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The gas cooling nozzle "GSIM2" series is a two-fluid nozzle that can be used for cooling combustion gases in steel mills and power plants, treating waste liquid in incineration plants, and dust suppression. The "GSIM2" series achieves a large spray volume with a small amount of compressed air due to its low air-to-water ratio design, making it an effective atomizing nozzle for cooling combustion gases, humidifying exhaust gases, and spraying waste liquids in steel mills and power plants. With high cooling performance, it ensures stable processing for temperature control in furnaces and gas cooling in cooling towers. Additionally, it is utilized for dust suppression in recycling facilities, waste incineration plants, and raw material facilities for steel and cement, effectively reducing dust dispersion with fine mist.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The spillback nozzle "SPB Series" allows for adjustment of spray flow rate without changing the supply pressure, achieving a turndown ratio of 1:10. It has minimal particle size variation, making it suitable for gas cooling applications. The spillback nozzle "SPB Series," ideal for temperature regulation of blast furnace gas and incinerators, enables flow rate adjustment while maintaining a constant supply pressure, achieving a turndown ratio of 1:10. The change in particle size between maximum and minimum spray flow rates is extremely small, providing stable gas cooling performance. 【Features】 - High turndown ratio (capable of wide range flow adjustment) - Effective cooling and evaporation performance due to uniform fine atomization - Extremely small particle size variation with changes in spray flow rate.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no Ikeuchi) has published a new page. The humidification unit "AE-T" is easy to move with its casters. It can be used easily without the need for piping, allowing for precise pinpoint humidification of targeted areas. It enables efficient humidity management by humidifying only the desired locations, making it energy-saving and convenient. It can also be utilized for humidification in small warehouses, facilities, and research institutions, supporting product quality improvement and work environment enhancement through the introduction of spot humidification. 【Features】 - Easy to install without piping, making location changes simple - Allows for pinpoint humidification, avoiding issues caused by over-humidification - Contributes to product quality improvement through static electricity and dust control measures

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "RJ" series automatically rotates with the force of the cleaning liquid, providing powerful 360° cleaning without external power. It is a tank cleaning nozzle that promotes efficient work automation. Despite its compact size, the powerful "RJ" series effectively cleans stubborn and caked-on dirt with a straight water flow, allowing for efficient work automation even at low pressure. It can be used at relatively high temperatures and offers a lineup of both the standard two-direction type and the four-direction type suitable for dense cleaning of small-diameter tanks, achieving efficient cleaning. It ensures reliable cleaning of beverage, food, and paper raw material tanks while reducing labor and improving work efficiency.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The nozzle header series "INVVEA," which boasts excellent chemical resistance, allows for one-touch attachment and detachment of the nozzle, making it highly maintainable. It is thin in the thickness direction and enables uniform and powerful spraying. It is suitable for applications such as etching and particle removal in semiconductor and precision equipment manufacturing. With fine particle spraying, it can effectively clean LCD glass substrates and precision parts, ensure uniform cleaning across wide manufacturing lines, and cater to a wide range of applications including surface treatment, cooling, and chemical spraying. Additionally, the one-touch detachable nozzle structure achieves excellent maintainability.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The precision two-fluid nozzle "BIM" series allows for cooling without wetting the target object through extremely fine mist spray, enabling fine-tuning of cooling rates in temperature management for steel plates and castings. Additionally, its design minimizes clogging, maintaining stable performance over long periods. It achieves uniform cooling in the manufacturing processes of metals and molded products, supporting improved production efficiency. [Features] - Non-wetting cooling: Fine and uniform spray efficiently cools the target object without wetting. - Flexible control of cooling speed: Allows adjustment of temperature management in the cooling process. - Clog-resistant design: Maintains stable spray performance over extended periods. - Wide applicability: Compatible with a variety of target objects, including metal parts, molded products, steel plates, and castings. - High-efficiency production support: Achieves uniform cooling, enhancing productivity and quality. *We also offer a wide range of other spray nozzles. For quotes, custom requests, or any inquiries regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "ES・ESV (PTFE)" series is made entirely of PTFE, demonstrating excellent chemical resistance. It rotates solely by the power of the cleaning water, and with fewer components, maintenance is easy, achieving both economic efficiency and durability. The tank cleaning process, which was traditionally done manually, has been automated, significantly reducing labor and time, allowing for efficient and stable cleaning operations. Furthermore, it can also be used as a spray nozzle for CIP cleaning systems, accommodating a wide range of applications. - ES (PTFE) is a straight flow type. - ESV (PTFE) is a fan-shaped water flow (flat) type.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "ES" series, which rotates solely by the power of cleaning water, does not require external power, has fewer parts, and is easy to maintain, achieving both economic efficiency and durability. The tank cleaning process, which was traditionally done manually, has been automated, significantly reducing labor and time, enabling efficient and stable cleaning operations. Furthermore, it can also be used as a spray nozzle for CIP cleaning systems, accommodating a wide range of applications.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The flexible joint "UT" series is a spray nozzle joint that allows for easy adjustment of the spray direction and angle even after installation in piping. It can adjust the spray direction of standard spray nozzles up to an angle of 50°. Both metal and plastic options are available in the lineup.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "SETO" series spray nozzle for viscous liquids, which is resistant to clogging, enables stable low-volume spraying of high-viscosity liquids and prevents clogging with excellent foreign matter passage. It uniformly atomizes viscous liquids such as sauces, syrups, and oils, demonstrating liquid-saving effects by reducing waste. 【Features】 - Clogging prevention design: The large foreign matter passage diameter makes it difficult to clog even with high-viscosity liquids. - Uniform fine atomization: Viscous liquids like sauces and syrups can be applied evenly. - Liquid-saving effect: Efficiently sprays liquids in small amounts, reducing material waste. - Wide range of applications: Ideal for precise spraying of various viscous liquids such as cooking oil, rust inhibitors, and lubricants. - Two-fluid spray technology: Achieves stable atomization performance for high-precision and continuous spraying. *We also have a rich lineup of other spray nozzles. For inquiries regarding nozzles, including quotes and custom orders, please feel free to contact us. Phone and online consultations are also available at any time.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The gas cooling spray nozzles "GSIM2 Series," "JJA Series," and "DOVVA-G Series" demonstrate excellent atomization performance, rapidly and uniformly cooling high-temperature gas, completely evaporating water droplets in the cooling tower, and preventing the accumulation of drain and dust deposits. Additionally, by considering the flow of gas in the arrangement of the spray nozzles and designing the layout to match the shape of the cooling tower, the cooling efficiency is maximized. The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. It adopts an external mixing method that efficiently mixes gas and liquid outside the nozzle. This is a full cone spray nozzle that generates a fine mist with an average particle diameter of 60μm or less. Its design is resistant to clogging, allowing for stable spray performance and enabling the consistent production of high-quality products in granulation and spray drying processes.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. Introducing the "Spray Vehicle," a flexible spray system that can be easily moved and set up in necessary locations. With simple operation, it allows for precise adjustments of spray timing and quantity, achieving uniform results with high-precision spraying. It caters to a variety of applications in the food sector, such as seasoning and coating, and in the industrial sector, including the application of lubricants, rust inhibitors, and release agents. By spraying the right amount of raw materials at the necessary timing, it significantly reduces material waste and contributes to cost reduction. Additionally, a variety of optional peripheral parts, such as nozzle fixing components, photoelectric sensors, and mat switches, are available, enabling the rapid construction of an optimal layout tailored to the site.