The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "PON" series is a push-out type rotating cleaning nozzle that powerfully cleans ducts, tanks, and the interiors of pipes. It is easy to detach and maintain. When not in use, it is stored so that the installation part is flush with the wall, and only the nozzle part protrudes and rotates during cleaning. It rotates at a low speed, applying strong pressure across the entire surface, demonstrating high cleaning power and effectively cleaning the entire interior of ducts, pipes, and tanks.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The gas cooling nozzle "GSIM2" series is a two-fluid nozzle that can be used for cooling combustion gases in steel mills and power plants, treating waste liquid in incineration plants, and dust suppression. The "GSIM2" series achieves a large spray volume with a small amount of compressed air due to its low air-to-water ratio design, making it an effective atomizing nozzle for cooling combustion gases, humidifying exhaust gases, and spraying waste liquids in steel mills and power plants. With high cooling performance, it ensures stable processing for temperature control in furnaces and gas cooling in cooling towers. Additionally, it is utilized for dust suppression in recycling facilities, waste incineration plants, and raw material facilities for steel and cement, effectively reducing dust dispersion with fine mist.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The spillback nozzle "SPB Series" allows for adjustment of spray flow rate without changing the supply pressure, achieving a turndown ratio of 1:10. It has minimal particle size variation, making it suitable for gas cooling applications. The spillback nozzle "SPB Series," ideal for temperature regulation of blast furnace gas and incinerators, enables flow rate adjustment while maintaining a constant supply pressure, achieving a turndown ratio of 1:10. The change in particle size between maximum and minimum spray flow rates is extremely small, providing stable gas cooling performance. 【Features】 - High turndown ratio (capable of wide range flow adjustment) - Effective cooling and evaporation performance due to uniform fine atomization - Extremely small particle size variation with changes in spray flow rate.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no Ikeuchi) has published a new page. The humidification unit "AE-T" is easy to move with its casters. It can be used easily without the need for piping, allowing for precise pinpoint humidification of targeted areas. It enables efficient humidity management by humidifying only the desired locations, making it energy-saving and convenient. It can also be utilized for humidification in small warehouses, facilities, and research institutions, supporting product quality improvement and work environment enhancement through the introduction of spot humidification. 【Features】 - Easy to install without piping, making location changes simple - Allows for pinpoint humidification, avoiding issues caused by over-humidification - Contributes to product quality improvement through static electricity and dust control measures

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "RJ" series automatically rotates with the force of the cleaning liquid, providing powerful 360° cleaning without external power. It is a tank cleaning nozzle that promotes efficient work automation. Despite its compact size, the powerful "RJ" series effectively cleans stubborn and caked-on dirt with a straight water flow, allowing for efficient work automation even at low pressure. It can be used at relatively high temperatures and offers a lineup of both the standard two-direction type and the four-direction type suitable for dense cleaning of small-diameter tanks, achieving efficient cleaning. It ensures reliable cleaning of beverage, food, and paper raw material tanks while reducing labor and improving work efficiency.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The nozzle header series "INVVEA," which boasts excellent chemical resistance, allows for one-touch attachment and detachment of the nozzle, making it highly maintainable. It is thin in the thickness direction and enables uniform and powerful spraying. It is suitable for applications such as etching and particle removal in semiconductor and precision equipment manufacturing. With fine particle spraying, it can effectively clean LCD glass substrates and precision parts, ensure uniform cleaning across wide manufacturing lines, and cater to a wide range of applications including surface treatment, cooling, and chemical spraying. Additionally, the one-touch detachable nozzle structure achieves excellent maintainability.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The precision two-fluid nozzle "BIM" series allows for cooling without wetting the target object through extremely fine mist spray, enabling fine-tuning of cooling rates in temperature management for steel plates and castings. Additionally, its design minimizes clogging, maintaining stable performance over long periods. It achieves uniform cooling in the manufacturing processes of metals and molded products, supporting improved production efficiency. [Features] - Non-wetting cooling: Fine and uniform spray efficiently cools the target object without wetting. - Flexible control of cooling speed: Allows adjustment of temperature management in the cooling process. - Clog-resistant design: Maintains stable spray performance over extended periods. - Wide applicability: Compatible with a variety of target objects, including metal parts, molded products, steel plates, and castings. - High-efficiency production support: Achieves uniform cooling, enhancing productivity and quality. *We also offer a wide range of other spray nozzles. For quotes, custom requests, or any inquiries regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "ES・ESV (PTFE)" series is made entirely of PTFE, demonstrating excellent chemical resistance. It rotates solely by the power of the cleaning water, and with fewer components, maintenance is easy, achieving both economic efficiency and durability. The tank cleaning process, which was traditionally done manually, has been automated, significantly reducing labor and time, allowing for efficient and stable cleaning operations. Furthermore, it can also be used as a spray nozzle for CIP cleaning systems, accommodating a wide range of applications. - ES (PTFE) is a straight flow type. - ESV (PTFE) is a fan-shaped water flow (flat) type.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "ES" series, which rotates solely by the power of cleaning water, does not require external power, has fewer parts, and is easy to maintain, achieving both economic efficiency and durability. The tank cleaning process, which was traditionally done manually, has been automated, significantly reducing labor and time, enabling efficient and stable cleaning operations. Furthermore, it can also be used as a spray nozzle for CIP cleaning systems, accommodating a wide range of applications.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The flexible joint "UT" series is a spray nozzle joint that allows for easy adjustment of the spray direction and angle even after installation in piping. It can adjust the spray direction of standard spray nozzles up to an angle of 50°. Both metal and plastic options are available in the lineup.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "SETO" series spray nozzle for viscous liquids, which is resistant to clogging, enables stable low-volume spraying of high-viscosity liquids and prevents clogging with excellent foreign matter passage. It uniformly atomizes viscous liquids such as sauces, syrups, and oils, demonstrating liquid-saving effects by reducing waste. 【Features】 - Clogging prevention design: The large foreign matter passage diameter makes it difficult to clog even with high-viscosity liquids. - Uniform fine atomization: Viscous liquids like sauces and syrups can be applied evenly. - Liquid-saving effect: Efficiently sprays liquids in small amounts, reducing material waste. - Wide range of applications: Ideal for precise spraying of various viscous liquids such as cooking oil, rust inhibitors, and lubricants. - Two-fluid spray technology: Achieves stable atomization performance for high-precision and continuous spraying. *We also have a rich lineup of other spray nozzles. For inquiries regarding nozzles, including quotes and custom orders, please feel free to contact us. Phone and online consultations are also available at any time.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The gas cooling spray nozzles "GSIM2 Series," "JJA Series," and "DOVVA-G Series" demonstrate excellent atomization performance, rapidly and uniformly cooling high-temperature gas, completely evaporating water droplets in the cooling tower, and preventing the accumulation of drain and dust deposits. Additionally, by considering the flow of gas in the arrangement of the spray nozzles and designing the layout to match the shape of the cooling tower, the cooling efficiency is maximized. The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. It adopts an external mixing method that efficiently mixes gas and liquid outside the nozzle. This is a full cone spray nozzle that generates a fine mist with an average particle diameter of 60μm or less. Its design is resistant to clogging, allowing for stable spray performance and enabling the consistent production of high-quality products in granulation and spray drying processes.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. Introducing the "Spray Vehicle," a flexible spray system that can be easily moved and set up in necessary locations. With simple operation, it allows for precise adjustments of spray timing and quantity, achieving uniform results with high-precision spraying. It caters to a variety of applications in the food sector, such as seasoning and coating, and in the industrial sector, including the application of lubricants, rust inhibitors, and release agents. By spraying the right amount of raw materials at the necessary timing, it significantly reduces material waste and contributes to cost reduction. Additionally, a variety of optional peripheral parts, such as nozzle fixing components, photoelectric sensors, and mat switches, are available, enabling the rapid construction of an optimal layout tailored to the site.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. [Trial Products Available for Loan] The Air Knife "SLN" series improves drying capability through uniform air injection, contributing to increased transport speed. - SLNB Series: This blower-type air slit nozzle has a tapered tip, allowing for air blowing in narrow spaces such as between rolls. - SLNHA-H Series: This compressor-type air slit nozzle sprays evenly in the width direction. - SLNHA-NA Series: This air slit nozzle allows for self-maintenance. [Features] - High efficiency at close range: By reducing the injection distance to the target, it achieves a powerful liquid and water removal effect with a small amount of air. - Specification by application: Choose from three types: SLNB series, SLNHA-H series, and SLNHA-NA series. - Improved drying capability: Uniform air injection streamlines liquid and water removal tasks, optimizing transport speed. - Trial product loan support: Allows verification of effectiveness in actual working environments.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The tank cleaning nozzle thoroughly removes stubborn dirt adhering to food tanks, fermentation tanks, and seasoning tanks with high-pressure cleaning and powerful 360-degree cleaning performance, preventing any cleaning residue. By significantly shortening work time with an efficient cleaning cycle and reducing the amount of cleaning agents and water used, it achieves a reduction in environmental impact and running costs. Additionally, its compact design allows it to fit into narrow spaces, making it usable in various installation environments. Furthermore, a CIP cleaning compatible model is also available, promoting labor-saving and automation while ensuring hygiene standards. It provides a cleaning solution that balances efficiency, safety, and cost reduction, not only for tank cleaning in the food and beverage industry but also for conveyor, piping, and equipment cleaning.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The compact and ultra-low flow two-fluid nozzle "CBIM" series is an atomizing nozzle suitable for installation inside equipment. It is capable of spraying viscous liquids and can be utilized for various applications, including cooling and humidity control within equipment. With its compact design that allows for easy installation in tight spaces and a diverse lineup, it meets the needs of various manufacturing environments. [Features] - Achieves precise spraying at ultra-low flow rates: High-precision spraying performance despite its compact design. - Supports spraying of viscous liquids: Efficiently sprays a variety of liquids. - Compact design ideal for installation inside equipment: Small body that is easy to install even in narrow spaces. - Versatile applications: Active in various applications, including cooling and humidity control. - Diverse lineup: Offers options including spray ON/OFF control types.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (IKEUCHI MIST) has published a new page. The "IKEUCHI MIST" tank cleaning nozzle used in the clean processes of pharmaceutical manufacturing approaches every corner of the tank with powerful 360-degree all-around cleaning performance, thoroughly removing residues. The efficient cleaning cycle reduces work time and contributes to ecology by decreasing the amount of cleaning agents used. There are also models compatible with CIP cleaning, achieving labor-saving and unmanned operations while meeting hygiene standards. This cleaning solution balances efficiency, safety, and cost reduction, providing strong support to the pharmaceutical industry.

The industrial spray nozzle manufacturer, IKEUCHI Co., Ltd. (Kiri no IKEUCHI), has published a new page. In addition to easy piping fixation using a spring clip, the "INQB" series features a nozzle body that can be exchanged with a single touch, allowing for spray direction adjustment of up to 50 degrees, thus simultaneously improving work efficiency and enabling flexible spray settings. [Features] - One-touch piping connection: Easily fixed to piping with a spring clip, allowing for quick installation work. - Adjustability of spray direction: The ball joint allows for flexible changes in spray direction of up to 50 degrees. - Easy exchange of nozzle body: The nozzle can be exchanged with a single touch, making maintenance easy. - Improved work efficiency: Easy installation and adjustment enable quick setup of the spray system. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

Ikeuchi Corporation (Kiri no Ikeuchi, Headquarters: Nishi Ward, Osaka City, Osaka Prefecture) has added a new model number (TF-FS 42-16-005 S316L-IN) to its compact air nozzle 'TF-FS42', which enables flat and uniform air blowing, and began sales on November 1, 2024. This new model achieves a strong impact force with a lower injection volume compared to existing models, and features low air consumption, characteristic of the TF series, contributing to energy savings and reduction of CO2 emissions through air nozzle switching. 【Overview of the Compact Air Nozzle 'TF-FS'】 With a width of 42mm, height of 35mm, and depth of 14mm, this compact air nozzle excels in the straightness and uniformity of the injected air, as well as in quiet operation. It is a staple product of our company, available in both resin (1 model number) and metal (4 model numbers), and has numerous installation records, such as being incorporated in multiple units of automated equipment operating on factory lines. *The new model number (TF-FS 42-16-005 S316L-IN) is available only in metal as of November 28, 2024.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The high-impact, uniform slit nozzle "PSN" series demonstrates excellent performance in the cooling processes of CGL and EGL equipment, suppressing cooling unevenness with high-precision cooling control. In spangle treatment, it achieves uniformity of the steel plate surface and high-quality finishing, contributing to the stability of the manufacturing line and quality improvement. Furthermore, its durable and maintainable design meets on-site needs while also contributing to long-term cost reduction. 【Features】 - Compatible for use in CGL and EGL equipment: Delivers stable performance in cooling processes. - High-precision cooling control: Reduces cooling unevenness and achieves uniform cooling. - Ideal for spangle treatment: Supports uniformity of the steel plate surface and high-quality finishing. - Highly durable design: Capable of withstanding harsh on-site environments. *We also offer a wide range of other spray nozzles. For quotes, custom requests, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "SLNH-H" series slit laminar nozzles for liquid curtains and water curtains achieve a uniform spray in a thin film and enable cost reduction of chemical solutions and pure water. They excel in the uniformity of flow rate and impact distribution, achieving high-precision spraying across the entire width. They are optimal for cleaning and coating processes of printed circuit boards and glass substrates, and they also contribute to the miniaturization and space-saving of equipment. 【Features】 - Uniform spray across the entire width: Excellent uniformity in flow rate and impact distribution, achieving high-precision thin film spraying. - Cost reduction of chemical solutions and pure water: Efficiently spray only the necessary amount, reducing consumption. - Versatile applications: Ideal for cleaning and coating processes of LCDs, printed circuit boards, and glass substrates. - Compact design: Contributes to the miniaturization and space-saving of equipment. - High versatility: Adaptable for the use of chemical solutions and pure water, suitable for various electronics applications. *We also have a wide range of other spray nozzles available. For quotes, custom requests, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are also available at any time.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. Introducing the "PSN" series, a high-impact slit-type two-fluid nozzle suitable for precision cleaning. With excellent atomization performance, it thoroughly removes fine dirt and foreign substances from the surface of LCD panels without uneven cleaning, thereby improving quality. Compared to the method of arranging multiple nozzles individually, it enables uniform cleaning without inconsistencies. 【Features】 High-impact cleaning: Powerfully removes dirt and foreign substances from LCD panels. Excellent atomization: Addresses dirt in gaps with fine mist. Uniform finish: Cleans the entire panel without unevenness. Electronics compatible: Ideal for high-precision panel and substrate cleaning. *We also offer a wide range of other spray nozzles. For quotes, custom requests, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

The industrial spray nozzle manufacturer IKEUCHI Co., Ltd. (Kiri no IKEUCHI) has published a new page. The "SD Series" features an instantaneous intermittent spray with a minimum spray unit of 0.05 seconds. It is ideal for applications requiring small amounts of oil, chemical solutions, or marking, with minimal drift thanks to its low-drift pulse jet. The ultra-high-speed pulse spray "SD Series" enables an astonishing instantaneous intermittent spray with a minimum spray unit of 0.05 seconds, making it perfect for small applications of oil, chemical solutions, and precise marking while minimizing drift. With high-precision control, it provides a uniform finish without inconsistencies on the application target, contributing to improved work efficiency and reduced material waste.