All products and services
1～30 item / All 200 items
-
Can accommodate various shapes | Can also create L-shaped fittings.
Custom orders can accommodate various shapes!
last updated
-
If it's about cleaning without electricity, this is it! Sweep with Thunderlon.
Ideal for sweeping fine dust that is affected by static electricity!
last updated
-
PPφ2.0 is a thick fiber material.
Our thick PP fiber is round thanks to the ingenuity of the fiber manufacturer!
last updated
-
A straight brush uniquely combined for custom-made orders.
Using brass wire! The metal fittings are designed in a figure-eight shape.
last updated
-
It is a goat hair brush for dusting off fine dust.
Soft texture! Introducing examples of goat hair brushes that gently remove fine dust.
last updated
-
A brush with a whetstone that can also be used for wood grain finishing.
Introducing examples of brushes made with nylon containing abrasive particles! They are also used for wood grain finishing.
last updated
-
Wire roll brush with screws
Introducing an example of a roll brush with threaded shafts that can be connected to a device!
last updated
-
One-week roll brush
Manufactured entirely from metal fittings! Here is an example of a roll brush made for just one complete turn.
last updated
-
Roll brush | A brush made with extremely fine brass.
Introducing a case where a brass brush with a diameter of 0.06 was wrapped around a shaft with a diameter of 6!
last updated
-
Roll brush | Stronger wire brush
Introducing an example of a roll brush with SW0.4 and hair material attached to the segmented axis!
last updated
-
Grit | Roll Brush | Even Higher Density with Tight Wrapping
Introducing an example of the Grit roll brush! It has a high density due to the close winding.
last updated
-
Nylon brush with a whetstone.
An example using grit nylon, which incorporates whetstone.
last updated
-
Brass wire can also be made into brushes.
An example of using brass, which is a soft material, as a metal-based hair material!
last updated
-
Roll brush with axis processing.
A brush made from plated single wire material is attached to the shaft with the threaded cut!
last updated
-
Leave the installation on large equipment to us!
Large R processing is also possible! Here are examples of brushes installed on large equipment.
last updated
-
This is a horsehair brush often used for machines related to paper.
Cut the ring brush in half and attach it to the fixture with welding! Animal hair that is less likely to generate static electricity.
last updated
-
Wire ring brush
Introducing examples of wire ring brushes! The hair at the joints will be reduced.
last updated
-
Ring brush | One-time wrap is a ring brush
A roll brush with only one loop is called a ring brush!
last updated
-
Coil brush | Using wire
We would like to introduce an example of a wire hair material coil brush!
last updated
-
Coil brush
A brush without the axis of a roll brush is used for unexpected purposes!
last updated
-
Heat-resistant and chemical-resistant PPS brush.
An example of a dragonfly brush made with heat-resistant and chemical-resistant PPS fibers!
last updated
-
Brushes for attaching to routers and drills.
A channel brush is coiled and attached to a shaft, with a mounting part of φ8 manufactured, allowing it to be attached to equipment and drills.
last updated
-
We also accept stepped shafts.
Increasing the diameter of the axis where the brush wraps will allow you to increase the amount of hair!
last updated
-
You can gradually shear the wool.
An example of a brush that has been gradually trimmed! Such processing is also possible.
last updated
-
Thunderon Roll Brush
It is made from a fiber called Thunderon, which has anti-static properties!
last updated
-
It can also be wrapped around thick shafts.
An example of a brush wrapped around a shaft that has been processed with a pipe and boss machining with steps!
last updated
-
If you don't want to get hurt, it's goat hair.
It is made of soft material, so it is used when you don't want to scratch the items being cleaned!
last updated
-
De-static effect | Thunderlon's roll brush
It has a static electricity effect! An example of a pitch-wound brush made with Thunderon.
last updated
-
Polishing steel plates and deburring | Grit comb brush
An example of a roll brush made with coarse nylon! It is also called a "tombo brush."
last updated
-
We also make roll brushes using the same bristle material as scrubbing brushes.
It is often used for scrubbing brushes, an example of a brush made with palm fibers!
last updated