We are pleased to announce that our company will be exhibiting at "SETC 2026 KYOTO." We look forward to welcoming you all. At our booth, we will showcase our engineering services and CAE software products. Specifically, we will present contract services that address your technical challenges, including vehicle engineering, alternative propulsion systems, simulation services, and a full range of testing services, as well as our flagship CAE software product, "FEMFAT," which is a fatigue life prediction analysis software, along with our newly released "FEMFAT MELCOM," a strength analysis software for PCBA, among four other products. Additionally, we will introduce the Electric Hydraulic Power Steering Pump (EHPS), a product developed by our ECS in Austria, which offers a wide range of benefits, including improved fuel efficiency, reduced CO2 emissions, enhanced steering system efficiency, and support tailored to our customers' needs. We sincerely look forward to meeting you at SETC 2026 KYOTO!

We are pleased to announce that our company will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA." We look forward to welcoming everyone to our booth. <Exhibition Content> • ADAS: Next-generation advanced driver assistance systems • Zero G Seat: Innovative seat designed for comfort and safety • Portfolio of software solutions and engineering services • Complete vehicle solutions At the ECS Group, we will showcase engineering services and analysis software in the development areas of commercial vehicles, special vehicles, EV/FCV drive system adaptation, simulation, prototyping, and testing. <Exhibits from ECS> • Engineering services and contract development • Analysis software • Fatigue life prediction analysis software FEMFAT • Mode-based contact analysis software MAMBA • Measurement data processing software FEMFAT LAB • Strength analysis software for printed circuit board assembly (PCBA) FEMFAT MELCOM

We are pleased to announce that we will be exhibiting at the "18th Automotive World" held at Tokyo Big Sight, specifically at the "18th Car Electronics Technology Exhibition (Testing Zone)." Automotive World showcases the latest technologies in cutting-edge automotive themes. Among these, the "International Car Electronics Technology Exhibition" is the world's largest specialized exhibition in this field, featuring semiconductors, electronic components, software, and testing technologies that support the evolution of car electronics. From our company, we will be displaying engineering services and analysis software products from Magna Powertrain. Specifically, we will present contract services that help solve our customers' technical challenges, such as vehicle engineering, alternative propulsion systems, simulation services, and a full range of testing services, as well as four products including our flagship CAE software "FEMFAT" for fatigue life prediction analysis and the newly released "FEMFAT MELCOM" for strength analysis of PCBA. We invite you to visit the Magna booth.

The "Keysight Simulation Forum 2025 Tokyo" will be held on Wednesday, November 19, 2025, at Otemachi Place Hall & Conference! On that day, we will also have an exhibition booth where we will introduce our fatigue life prediction analysis software, FEMFAT. If you attend, please be sure to stop by our booth.

From October 4-9, 2025, Brussels Expo will become the exhibition grounds containing Europe’s biggest and most globally oriented trade show. Manufacturers of battery electric buses, autonomous buses, ticketing, interior design, fuel cells, HVAC and intercity buses will present their latest innovations. Furthermore, Busworld Europe 2025 will impress its visitors with an outstanding exhibition covering all aspects of the bus and coach industry, including components, software, future mobility, authorities and others. Stop by at the Magna booth to learn more about our engineering services portfolio and our electro-hydraulic power steering pump. The EHPS is a product developed by ECS, that offers a wide range of benefits such as fuel savings, reduced CO2 emissions, increased steering system efficiency and demand-based steering support. We look forward to welcoming you at Busworld Europe 2025!

The Altair Technology Conference (ATC) Japan 2025 will be held on June 3, 2025 (Tuesday) at Hilton Tokyo Odaiba! On that day, our company will also be a sponsoring partner and will set up an exhibition booth to introduce the fatigue life prediction analysis software FEMFAT through the Altair Partner Alliance (APA). If you attend, please be sure to stop by our booth.

Event Date: May 14-15, 2025 Location: Waidhofer, Austria The Magna ECS Simulation Conference, hosted by the Engineering Center Steyr (ECS), is a hub for sharing expertise in various fields of simulation in vehicle development. Presentations of cutting-edge simulation technologies are scheduled from researchers and engineers active in major OEMs and research institutions. The keynote speeches will feature advanced applications and innovative technologies in fatigue analysis, thermal management, and dynamic simulation from leading experts in those fields. The following four conferences will be held simultaneously: - Thermal Management (KULI Software) - Fatigue Analysis (FEMFAT Software) - Testing and Measurement Systems (FEMFAT LAB Software) - Dynamic Simulation (MBS and NVH) If you wish to participate, please feel free to contact us at the information below.

The 7th International Electric Vehicle Technology Conference (EVTeC 2025), hosted by JSAE, will be held at Pacifico Yokohama. In this event, Christian Neubacher will give a presentation on the structural evaluation of printed circuit board assemblies (PCBA). We hope you will attend.

We are pleased to announce that we will be exhibiting at the "17th Automotive World" held at Tokyo Big Sight, specifically at the "17th International Car Electronics Technology Exhibition." Automotive World showcases the latest technologies on cutting-edge themes in the automotive industry. Among these, the "International Car Electronics Technology Exhibition" is the world's largest specialized exhibition in this field, featuring semiconductors, electronic components, software, and testing technologies that support the evolution of car electronics. From our company, we will introduce three products, including our engineering services that can meet various needs from CAE to prototyping, testing, and evaluation, as well as our flagship CAE software, the "Fatigue Life Prediction Analysis Software FEMFAT." We invite you to visit the Magna booth.

"FEMFAT MELCOM" is a software package developed by Magna Powertrain Engineering Center Steyr (ECS) to simulate and predict defects on printed circuit boards (PCBs) incorporated in power electronics products such as inverters. For more details, please visit the product page.

We hold the FEMFAT User Meeting once every two years in Japan. Thanks to all of you, we are pleased to announce that this year marks the 11th meeting. The development manager from Magna Powertrain Engineering Center Steyr GmbH & Co KG (ECS), the developer of FEMFAT, will also be visiting Japan, so we believe this will be a great opportunity to discuss any inquiries or requests regarding FEMFAT directly. Additionally, we have planned numerous presentations, including case studies from users, case studies from ECS, and the latest information regarding FEMFAT. We sincerely look forward to the participation of many of you. *Please note that there will be no online streaming; the event will be held in-person only.

We are pleased to announce that our company will be exhibiting at the "2024 YOKOHAMA International Automobile Technology Exhibition." We look forward to welcoming everyone. <Exhibition Content> • ADAS & Automated Driving • Cell to Seat System • Roof Systems (Soft Top) • One-Stop Shop from Engineering to Complete Vehicle Manufacturing • Engineering Services and Software Products At the ECS Group, we will showcase engineering services and analysis software in the development areas of commercial vehicles and special vehicles, EV/FCV drive system compatibility, simulation, prototyping, and testing. <Exhibits from ECS> • Engineering Services and Development Contracting • Analysis Software • Fatigue Life Prediction Analysis Software FEMFAT • Mode-Based Contact Analysis Software MAMBA • Measurement Data Processing Software FEMFAT LAB • Lightweight Large Truck Frame Concept

We are pleased to announce that we will be exhibiting at the "14th International Car Electronics Technology Exhibition" during the "14th Automotive World," which will be held at Tokyo Big Sight from January 19 (Wednesday) to January 21 (Friday), 2022. Automotive World showcases the latest technologies in cutting-edge themes within the automotive industry, such as autonomous driving, vehicle electrification, connected cars, and lightweighting. Among these, the "International Car Electronics Technology Exhibition" is the world's largest specialized exhibition in this field, featuring semiconductors, electronic components, software, and testing technologies that support the evolution of car electronics. We will be showcasing CAE software that can be utilized for improving fuel efficiency, reducing CO2 emissions, and considering lightweighting in the development and design of electric and hybrid vehicles. Specifically, we will introduce three products, including our flagship CAE software "FEMFAT," which is used for fatigue life prediction analysis, as well as engineering services for prototyping and vehicle testing. We invite you to visit the Magna booth.