◆A spray gun that inherits the features of FINER2 PLUS, with a wide adjustment range capable of touch-ups, block painting, and even blending. ◆The atomization performance is adjusted to the appropriate particle size, achieving high stabilization of the wide pattern shape. ◆By properly adjusting the dispersion of the pattern, it makes uniform film formation easy. ◆Pattern design intended for users at close to medium distances (approximately 150-200 mm). ◆Adopts an ergonomic design grip that accommodates various holding styles.

【New Release】Hand Spray Gun: F111 A successor model to the F110 series has been born. Its name is F111! It adopts a new atomization method using high micro-particle technology MMFT. The goals pursued were "high performance," "ease of use," and "beauty." With a newly designed paint nozzle and air cap that integrate three technologies, it maintains the paint output and micro-particle size while ensuring uniform particle diameter. 1. Laval Nozzle Mechanism Achieves high micro-particle generation and high coating efficiency by maintaining and slowing down the flow rate of a small amount of air. 2. Taper Control Evolves the micro-particle technology inherited from the original FINER. 3. Multi-Stage Rectification Mechanism Sets an R-shaped profile at the edge to streamline the air.

■Heat Shield Piston Reduces the bearings at the small end of the connecting rod, which are susceptible to the effects of compression heat. Additionally, the aluminum piston with a hollow structure is coated with a super engineering plastic. The coating blocks compression heat, and the hollow structure efficiently cools the entire piston, reducing the temperature of the large end bearing. This maintains product reliability even in high-temperature environments. ■High-Temperature Compatibility Tank mount type: Compatible with ambient temperatures up to 50°C Package type: Compatible with ambient temperatures up to 45°C ■Extension of Compressor Body Warranty to 2 Years This applies if the product is delivered in a normal state according to the precautions in the instruction manual, within 2 years of delivery, and within 6,000 operating hours. ■Reduction in Number of Consumable Parts Reduces consumable parts such as rider rings, pistons, and small end bearings. ■Increase in Discharge Air Volume by Up to 3% By adopting a cylinder offset structure and improving the sealing performance of the piston rings in combination with enhancements to the feather valve, the discharge air volume is increased by up to 3% compared to conventional models (excluding 2.2kW units).

1. Lightweight and Compact 1) The lightest model at 113g, approximately 30% lighter than the current model (MAR). 2) Compact size that does not interfere when attached to the spray gun. 3) Easy pressure adjustment and visibility due to the digital design. 2. Stable Air Usage and Pressure 1) By equipping a regulator at the gun handle, painting can be done with a constant pressure and air usage, unaffected by pressure fluctuations (around 0.2MPa) during the compressor's ON-OFF load. 3. Difference from Air Flow Regulators 1) Air flow regulators fundamentally have a needle mechanism that adjusts the gap through which air passes, thereby adjusting the air volume. This results in air passing through a constant gap, causing changes in air volume due to pressure fluctuations. In contrast, the regulator uses a diaphragm mechanism to maintain a constant pressure against variations in supply pressure, allowing for consistent air volume and enabling spraying at a constant pressure, stabilizing painting conditions. 4. Button Battery Type (CR2032) The power turns ON when detecting pressure above 0.02MPa and turns OFF below that, ensuring safety. If the power remains on, the battery will deplete in about 2W.

The air magician who turns "thoughts" into "forms." With nearly 100 years of experience and approximately 500 original projects completed each year. A group of Meiji masters who have honed their air technology has been creating "functions" and "forms" that meet our customers' needs. Utilizing nearly 100 years of manufacturing technology and development know-how, we respond to our customers' requests. Please feel free to reach out with any concerns or inquiries. https://bit.ly/3HGqK1W

We would like to inform you about our new product information. ■Target Products Newly released outdoor installation screw compressors: ODS-ED / ODS-V(D) ■New Product Information - Can be installed in various locations such as corridors, under stairs, and rooftops! Benefits of Outdoor Installation 1. Full performance of the compressor - Optimal installation environment can be selected - Prevents reduction in air volume due to temperature rise 2. Significant reduction in installation costs - No need for ducts or exhaust fans when installed outdoors - No need for structures like compressor rooms 3. Effective use of space - No need to change the layout within the factory - Maintenance space is easier to secure 4. Easy maintenance - Cleaning of oil coolers and aftercoolers is simple - Daily maintenance is easy with a large door that can be easily detached 5. Improvement of the factory environment - Waste heat is directly released to the outside air - Does not affect the air conditioning within the factory due to heat - Compressor noise does not echo within the factory

- FINER (fine particle, ease of handling, precision) + FORCE (strength, dynamic) - Wrapped in the great FORCE (power) of MEIJI's traditional delicacy, the birth of a new spray gun. Now available in three selectable variations! ■ Pressure film gloss: FINER FORCE B Achieves "solid coating with pressure film," "uniform particle size," and "uniform pattern shape" required for clear coatings. Also ideal for solid coatings that exhibit glossiness with thick application. ■ Thin film high atomization: FINER FORCE T Developed with a focus on metallic and pearl coatings inherited from the legendary machine, FINER-G14TC. Achieves essential spray performance for metallic and pearl coatings such as "high atomization," "thin film," and "flat (uniform) pattern" at a high level. ■ Thin film mirror: FINER FORCE R A SVLP (Small Volume Low Pressure) spray gun with low air volume and low overspray. Developed with a focus on "atomization" and "uniform film thickness." Suitable for beginners to skilled technicians, and capable of handling everything from solid to metallic finishes, making it an all-around spray gun.

New Release: Center Cup Type Hand Spray Gun! Release Date: November 2, 2020 - High Micronization Technology: Utilizing Meiji Micros Fine Technology - Dynamic Chamber - Optimization of Paint Ejection Volume - Low Resistance Structure & High Durability Design - Trigger Load Reduction Structure

/__/__/__/__/__/__/__/__ Release Commemoration Campaign /__/__/__/__/__/__/__/__ Purchase the cup set (F410-G + 6CP) in limited quantity for the first time and receive a stand as a gift!! /__/__/__/__/__/__/__/__ Product Features /__/__/__/__/__/__/__/__ Center cup specification that meets the demands of artisans for water-based paints "F410 Series" With a large body and center cup, it offers a wide pattern according to the discharge amount, providing five types of lineup such as low air volume and high atomization, dedicated to Japanese artisans. 【Features】 ● Connection part is made of stainless steel. ● Compatible with water-based paints. ● 13SP・14SP: Low air volume wide pattern ● 15EVW: High atomization wide pattern ● 20EV: Suitable for medium viscosity (clear, etc.) ● 25EV: Suitable for high viscosity (primer, etc.)

● The Finer NANOGUN-MV is compatible with both solvent and water-based materials, as well as one-component and two-component systems. ● Low-pressure specification up to 0.7 MPa. Available in two types: round nozzle and fan spray nozzle. ● The GNM6080 control module supplies low voltage to the gun and allows for easy manual settings.

Meiji Machinery's next step overturns the common knowledge of portable compressors. It is a machine born from Meiji Machinery's reform to create "an even better portable compressor." The new model <OAKS> has finally unveiled itself, further compact and quieter, inheriting the compactness from its predecessor, the DERBY.

[Now on sale] Compact Hand Spray Gun Finer Spot for Mastering Spot Repairs The "Finer Spot" is a hand spray gun specifically designed for spot repairs, faithfully reproducing the demands of skilled craftsmen. Its simple, compact body features an optimized spray volume for low-pressure use and an adjustable mechanism for fine-tuning, making it the lightest hand spray gun in its class, dedicated to the artisans of Japan.

Automotive Repair Dedicated Hand Spray Gun An environmentally friendly spray gun that pursues total cost reduction and basic performance. While maintaining and improving atomization, coating efficiency, and operability, the FINER2 Plus has evolved from the FINER2 by re-evaluating everything from the basic design to incorporate user needs. It retains the adjustable range that allows for touch-ups to block painting, which was well-received with the FINER2. With a new design for the air cap and paint nozzle, it achieves even finer atomization. It is optimal for metallic and pearl bases, contributing to the reduction of unevenness and stripes. It can also be used without issues on solid bases. This pattern setting is ideal for users who maintain a medium distance (approximately 150-200 mm) from the painting surface.

F-ZERO Suction Type Additional Lineup The highly acclaimed F-ZERO series welcomes the long-awaited suction type! We respond to our customers' needs. Dedicated tuning for the body passage circuit! Achieves performance equivalent to the gravity type T! Capable of mounting a large paint cup, a feature of the suction type! Ideal for metallic and pearl base! Great news for those using suction spray guns for automotive repair painting. We have newly developed the suction type spray gun of the F-ZERO series, which has received high praise by applying the outstanding technology of the gravity feed spray gun specifically developed for automotive repair. This allows for the mounting of large paint cups, making it easier to paint large areas.

Latest version updated in October 2015 This is the comprehensive catalog of Meiji spray guns and related equipment.

Latest version updated in October 2015 This is the comprehensive catalog of Meiji compressors and related equipment.

The lightest ultra-compact hand spray gun in its class! ■ Compact body for easy handling, the lightest in its class. ■ Optimized paint output. ■ Improved atomization performance with low air volume and low pressure. ■ Wide pattern and reduced overspray. ■ Reduced paint adhesion to the air cap. ■ Reduced trigger pull weight, the lightest in its class. ■ Liquid-contact part of the body is made of SUS303, compatible with water-based paints. ■ Air cap and individual parts available for separate purchase. ■ Increased strength of the paint nozzle, no packing required. ■ Needle packing screw can be adjusted with a commercially available wrench. *No wrench included.

"Introducing the convenient 2L type at an easy-to-afford price!!" ■Specifications: ● The maximum pressure has been standardized to 0.34MPa. ● Comes with a joint for the paint outlet, compatible with both G1/4 and G3/8 sizes. ● Weight has been reduced to 1.25kg for improved operability (16% lighter compared to the previous model). ● Features a hook-style handle for easy hanging installation.

■Supports high-pressure applications: Two types of outlets are available for general pressure (below 1.1MPa) and high pressure (below 2.5MPa). The air tank capacity is 9L, but it can be filled to a pressure of 4.2MPa, effectively utilizing the differential pressure and ensuring a sufficient amount of use. ■Wide range of applications: Three operating modes are available: normal mode, powerful mode, and low-speed mode. It accommodates a wide variety of applications. ■Easy to transport: Achieves the lightest weight in its class at 13kg. Additionally, it features handles that can be held vertically or horizontally, making it convenient to carry. ■Improved durability: Designed with reliability as a priority, it achieves a high durability with a compressor maintenance cycle of 1,200 hours. ■No regional restrictions: Equipped with a DC brushless motor and inverter control, it can be used for both 50Hz and 60Hz.

■Supports high-pressure applications: Two types of outlets are available: general pressure (below 1.1MPa) and high pressure (below 2.5MPa). The air tank has a capacity of 9L, but by filling the air tank to a pressure of 4.2MPa, the differential pressure can be effectively utilized, ensuring a sufficient amount for use. ■Versatile applications: Three operating modes are available: normal mode, powerful mode, and low-speed mode. It can accommodate a wide range of applications. ■Easy to transport: Achieves the lightest weight in its class at 13kg. Additionally, it features handles that can be held vertically or horizontally, making it convenient to carry. ■Improved durability: Designed with reliability as a priority, it achieves a high durability with a compressor maintenance cycle of 1,200 hours. ■No regional restrictions: Equipped with a DC brushless motor and inverter control, it can be used with both 50Hz and 60Hz.

We are pleased to announce the launch of the successor model to the highly acclaimed spray guns "FINER" and "FINER2." What is the essence required of a spray gun specifically designed for automotive repair? Returning to this fundamental question, we have thoroughly re-evaluated all the know-how accumulated since the development of the first domestic model from scratch. By listening to the voices of skilled painters, we pursued particle control and achieved ideal spray characteristics with excellent flow control technology. The refined craftsmanship shines even brighter when accompanied by polished tools. Developed as a tool that responds to the skills and sensibilities backed by this technology, the "Master Craftsman Project" introduces the evolved "F-ZERO" series with three new types. Additionally, we are launching the first metal cup with a pack-less one-touch lock cup, the "4GF-U," which overcomes the issues of conventional products and further enhances workability. This will be released as a limited initial production pack alongside the new F-ZERO, at a commemorative price.

We are pleased to announce the release of the successor model to the highly acclaimed spray guns "FINER" and "FINER2." What is the essence required for a spray gun specifically designed for automotive repair? We have returned to this fundamental question and thoroughly re-evaluated all the know-how accumulated since the development of the first domestic model from scratch. By listening to the voices of skilled painters, we pursued particle control and achieved ideal spray characteristics with excellent flow control technology. The refined craftsmanship shines even brighter when accompanied by polished tools. Developed as a tool that responds to the skills and sensibilities backed by this technology, the "Master Craftsman Project" introduces the evolved "F-ZERO" series in three types. Additionally, we are launching the first metal cup with a packless one-touch lock, the "4GF-U" gravity feed paint cup, which overcomes the issues of previous models and further enhances workability. This will be released as a limited initial production pack at a commemorative price, alongside the new F-ZERO launch.

**Oil-type package compressor with two compressors, a first for its class** ■ Energy-saving operation with multi-drive control ● Equipped with two compressors, it controls the number of operating units according to the amount of air used, saving unnecessary power. ● One compressor stops just before the maximum operating pressure and stands by as a backup. ● When the air usage increases and the pressure drops, the backup automatically starts operating. ■ High durability with oil-type compressor ● Features a proven two-stage compressor with high durability, optimizing cooling efficiency within the package and efficiently cooling the compressor body and motor. ● Standard equipped with an oil sensor to prevent accidents such as seizure due to oil shortage. ■ Improved maintenance ● Optimally arranged equipment to expand the workspace and enhance workability by allowing full access to the front panel. ■ Low noise and low vibration ● Reevaluated the area of sound-absorbing materials to improve sound absorption. ● Reevaluated the strength of the compressor frame and reexamined the matching with vibration-damping rubber to achieve low noise. ■ Easy operation ● Simplified operation management with the installation of hour meters for each compressor. ● Easy switching between the main and backup units with a switch operation. ● Emphasizing safety, an emergency stop switch is implemented.

■Cutting-edge technology that meets customer satisfaction. ■Improved finishing quality through the adoption of a new atomization method and optimization of flow characteristics. ■High coating efficiency, durability, and excellent operability achieved with low pressure and minimal air usage. ■Airflow ejected from the annular gap maintains a high flow velocity within a certain area. ■High shear force enables atomization with lower air pressure and minimal air volume, using less energy than conventional methods. ■With minimal air volume, airflow rapidly decelerates due to atmospheric resistance beyond a certain area, achieving high coating.

■High Viscosity Dedicated Hand Spray Gun 　▼ This high viscosity hand spray gun is ideal for applying adhesives and should be used with the dedicated cup 10ZP. 　▼ Since pressurization to the dedicated cup is done using sprayed air, it is possible to spray high viscosity adhesives without using a large pressurized tank. 　▼ You can choose from four different nozzle diameters according to your application. 　▼ It is optimal for solvent-based adhesives with a viscosity of less than 500 mPa·s. 　　 (Please consult us if the viscosity exceeds 500 mPa·s.) 　▼ The pattern adjuster allows you to switch between round and flat spray patterns. 　▼ The F210Z-PZ comes standard with a wide-angle specification (PZ1), and a narrow-angle specification (PZ2) is also available as an option. ■Recommended Gun by Kansai Paint 　▼ The F210Z-P25 is the recommended spray gun for Kansai Paint's water-based Zolacoat 2.

The F110 series adopts a new atomization method, enabling the formation of high-quality paint films. ■ New Atomization Method It ensures the necessary paint output for large guns, achieving high atomization and low overspray with minimal air volume, excelling in both economy and environmental conservation, while also improving performance in continuous painting. ■ Lightweight and Compact Achieved a weight reduction of -35% (A210) compared to conventional products, reducing portable weight and enhancing operational quickness. ■ High Durability The material of the paint nozzle has been changed, resulting in improved durability. ■ Ease of Use It is compatible with circulation systems, and the FA210 features a SUS circuit in the liquid contact area.

★The 360° pattern (hollow cone) is ideal for interior coating! ■Perfect for interior coating of cylindrical pipes up to φ300mm. ■By adjusting the position of the pipe section, it is possible to switch the pattern from full cone (round spray) to a low-drift wide-angle hollow cone with an enclosing shape. ■Achieves high atomization due to a high-speed rotation structure. ■The valve mechanism at the nozzle tip eliminates stepping and paint pooling.

◆Adoption of a clean white color ◆New pricing set to be more affordable ◆Reduced control pressure improves air discharge volume ◆Changed the method for reducing load during restart ◆Optimized airflow for internal cooling in the package, eliminating the exhaust fan and reducing power consumption ◆Elimination of the hour meter ◆Energy-saving type with pressure switch method ◆Significantly reduced vibration with excellent quiet design ◆Standard equipment includes totally enclosed external fan motor ◆Built-in air tank ◆Refrigerated air dryer integrated with clean air ◆Easy maintenance and low total cost ◆Medium pressure specifications also available (3.7KW)

Meiji Machinery has been manufacturing compressors for over 80 years, and we possess the valuable assets of "trust" and "confidence" that we have built over a long period. This is why we are able to offer the industry's first "3-year warranty" by a manufacturer. Now and in the future, we will continue to provide you with great peace of mind.