Introduction of powdered activated carbon injection equipment into the silo.

Installation of the upper hopper section of the vibrating discharge device located at the bottom of the silo.

last updated Dec 24, 2025

0174 Measures against bridging in the powdered sugar hopper

The discharge troubles caused by the rat hole phenomenon and the bridge phenomenon have been resolved!

last updated Dec 24, 2025

0175 Bridge measures for dust collection (powder dust such as FeO and CaO)

Measures against bridging of dust such as FeO and CaO powder coming from the electric furnace!

last updated Dec 24, 2025

Eliminate the powder clogging at the top of the 2S discharge outlet.

Install the Brodisk Mini and Brodisk to prevent discharge failures!

last updated Dec 24, 2025

0177 Measures to prevent clogging of the fly ash discharge chute

A blockage issue occurred, leading to the installation of the BD-20 type with a large air volume!

last updated Dec 24, 2025

0178 Elimination of rat holes in iron oxide-based powders.

By sequentially activating one by one with the controller, we eliminate the rat hole!

last updated Dec 24, 2025

0179 Introduction of engineering plastic manufacturing factory to the raw material hopper.

Divide 8 Brodisks into 4 locations and sequentially turn on the air! Solve the issue of raw material discharge failure.

last updated Dec 24, 2025

0180 Preventing bridge formation of metal powder

By setting it up, the bridge is prevented, allowing for stable discharge of raw materials.

last updated Dec 24, 2025

Installed in the hopper of the screw feeder for lead powder.

Preventing the bridging phenomenon in the upper hopper of the screw conveyor for lead powder extraction!

last updated Dec 24, 2025

Modified rubber shoot hopper with a blow disk installed.

After installation, the knocker can discharge powder stably without being activated!

last updated Dec 24, 2025

0161 Measures to prevent clogging of flake materials

Implementing a brodie disk for bridge prevention in the hopper of the spring coil conveyor!

last updated Dec 24, 2025

0162 Promotion of discharge from the hopper of polypropylene and corn starch.

To resolve issues such as rat holes and blockages, implement a Brody disk!

last updated Dec 24, 2025

0163 Bridge countermeasures for resin molding materials from an automobile parts manufacturer.

Implementing a blow disk as a countermeasure against bridging occurring in the material hopper of the resin molding factory!

last updated Dec 24, 2025

0164 At a sports equipment manufacturer, measures against bridge formation of synthetic resin powder.

A case where a bridge occurred due to the newly used resin material!

last updated Dec 24, 2025

Measures for Hanging Shelves of Iron Oxide Measuring Devices

Implementing a blow disk as a countermeasure for shelf suspension in the hopper of the screw feeder!

last updated Dec 24, 2025

Improvement of poor discharge of granules and fine powder mixture (Film Factory)

Introducing a case study of a Brody disk that resolved issues with poor pellet discharge!

last updated Dec 24, 2025

Implementation of bridge measures for dried sludge.

Introducing examples of promoting the discharge of dried sludge from silos in wastewater treatment facilities!

last updated Dec 24, 2025

Preventing bridging and rat holes in the hopper before the drying process.

Introducing a case of quicklime bridge in a poor liquidity state and measures taken against rat holes!

last updated Dec 24, 2025

0169 Promotion of Emission of Ultra-High Molecular Weight Polyethylene

Introducing a case that promoted the discharge of ultra-high molecular weight polyethylene raw materials from a small hopper!

last updated Dec 24, 2025

0170 Bridge measures for fibrous powder raw materials

Introducing case studies of powder hoppers for manufacturing plants of ceramics, tiles, etc.!

last updated Dec 24, 2025

0160 Measures to Prevent Adhesion of Fine Carbon Dust

Solving challenges in powder handling plants! Introducing case studies on measures against the adhesion of fine coal due to moisture.

last updated Dec 24, 2025

0159 Prevention of bridge formation in rice bran mixed feed

Raw materials that are easy to bridge with raw bran can resolve issues through installation!

last updated Dec 24, 2025

0158 Bridge measures for fly ash silos at power plants

Addressing rat-holing and bridging phenomena of powder inside the silo due to the vibration of the rubber disk.

last updated Dec 24, 2025

0157 Masterbatch Bridge Countermeasures

The issue of frequent bridge occurrences is resolved by the installation of ridge breakers.

last updated Dec 24, 2025

0156 Installed on the jet mill grinding product collection bag filter.

Improving the discharge and outflow of powdered materials such as rat holes and bridges!

last updated Dec 24, 2025

0155 Promotion of Olefin Resin Discharge

Solve problems with the installation of bridge prevention equipment! We can provide suitable guidance based on past experience!

last updated Dec 24, 2025

0154 Bridge elimination at the top of the screw feeder.

Based on past experiences, we provide guidance on suitable installation locations and operating examples for each case!

last updated Dec 24, 2025

0153 Promoting the outflow from the cement silo.

Install multiple blow discs to promote the outflow from the cement silo!

last updated Dec 24, 2025

The bridge of titanium oxide has been eliminated.

Economical and easy to install! Can be used in various applications, even with troublesome powders like TiO2!

last updated Dec 24, 2025

0151 Rat Hole Measures - Chemical Material Manufacturer

Easily resolve troubles! We will propose installation examples and operating conditions that match the customer's requirements.

last updated Dec 24, 2025