0741 Lime hopper (sludge incineration equipment)

It is widely used in various fields and has outstanding reliability! Adopted for bridge measures in quicklime hoppers for exhaust gas treatment.

last updated Sep 24, 2026

Example of installation in an air transport hopper for powdered sugar.

Introducing a case where a Brody Disk Mini was installed in an air transport hopper for powdered sugar with very poor fluidity!

last updated Sep 24, 2026

0739 The dust collector hopper has a slight incline causing a bridge to form... solution example.

We will introduce a case where the bridging caused by the reduced slope of the dust collector's hopper was resolved by the introduction of a blow disk!

last updated Aug 17, 2026

Improvement of the discharge of 0738 EVA resin sheet (whisker-shaped).

We will introduce a case where the issue of poor hopper discharge of sticky EVA resin sheets was resolved through equipment test lending and installation on actual machines!

last updated Aug 17, 2026

Installed in the eccentric hopper.

We will introduce an example where the issue of powder accumulation on the gently sloping side, making stable quantitative supply impossible, was easily resolved by installing a Brody disk!

last updated Aug 17, 2026

0736 Installed in the hopper of quicklime + activated carbon.

Place 8 standard Brodisk units! Aeration in pairs with a time difference.

last updated Jul 16, 2026

0735 Resolving fly ash blockage (steelworks)

Arrange 16 standard Brodisk units! Use a controller with 4 built-in solenoid valves for timed aeration.

last updated Jun 16, 2026

0734 Installed in the material hopper of the injection molding machine.

A case that solved the problem of poor material biting into the screw, leading to unstable molding!

last updated Jun 16, 2026

0733 Measures for Powder Bridging in Secondary Battery Materials

A case where two Brody Disk Minis were installed in the cone section with a height adjustment, totaling four units, with a hopper dimension of Ø300!

last updated May 18, 2026

0732 Powder drum inversion feeding machine

Customer issues resolved in one go! A case achieved at minimal cost through manual operation.

last updated May 12, 2026

0731 Installation case for quicklime silo

Using a controller equipped with 4 solenoid valves! An example of installing a blow disk in three layers.

last updated May 12, 2026

0730 At the powdered activated carbon injection facility

A Brody disk has been installed as a measure against bridge and rat hole issues in the powdered activated carbon storage tank!

last updated May 12, 2026

0728 Prevention of bridging in powder coatings

We provide information on suitable placement and control methods tailored to the individual conditions of our users!

last updated May 12, 2026

0727 At the PET flake dryer

We have a variety of elastic discs for Brodisks available!

last updated May 12, 2026

0726 Promoting the discharge of dry fly ash

We can provide guidance on appropriate arrangements and control examples based on the user's conditions!

last updated May 12, 2026

0725 Installed in the hopper section of the paper dust collector.

Low cost and highly effective! We are using it smoothly even after starting operation.

last updated May 12, 2026

0724 Examples of deliveries compatible with metal detectors

Measures against protein powder bridging! Detectable by metal detectors and X-ray inspection machines.

last updated May 12, 2026

0722 Measures to prevent clogging of powder with high moisture content

The purpose is to solve the clogging and blockage of powder through air aeration on the inner wall of the hopper and the vibration of elastic disks (rubber disks).

last updated May 12, 2026

0721 Preventing the adhesion growth of foundry sand

We will introduce a case where we provided product rentals and received very positive feedback!

last updated May 12, 2026

Installed in the hopper for biomass combustion ash.

Here is an example of the use of "Brodie Disk" in a calcium carbonate hopper!

last updated May 12, 2026

0719 Bridge measures for filtration aids

The elastic disk of the Brodisk is compatible with metal detectors and contains metal powder!

last updated May 12, 2026

Installed in the large fly ash storage tank.

It will lead to significant cost reductions and easily resolve bridges that cannot be solved with knockers, etc.!

last updated May 12, 2026

0717 Delivery of Brodisk (Brodisk Mini) for the food industry.

The metal detection compatible Brody Disk (mini), widely used in the food industry, has been adopted in the cosmetics industry!

last updated May 12, 2026

Preventing iron powder bridges.

The Brodisk is easy to install and offers excellent cost performance! We recommended a layout plan, and it was adopted.

last updated May 12, 2026

Installed in the 0715 PVC micro powder hopper.

Installed a blow disk mini for the Ø300 hopper and a blow disk for the Ø800 hopper!

last updated May 12, 2026

Mounting on the hopper of the powder roll feeder.

The results are good! There is no longer any occurrence of bridging even with very fine A powder.

last updated May 12, 2026

Elimination of residual resin powder and resin chips in the suction transport hopper.

Introducing a case study on the installation of a hopper for the suction transport of resin chips and resin powder!

last updated May 12, 2026

0712 Elimination of bridge and rat holes in talc + additives.

Introducing a solution for rat holes occurring at the bridge of the Φ800 hopper and its lower reducer!

last updated May 12, 2026

0711 Prevention of bridging in the gypsum board crushing hopper

A case where the customer conducted tests with a dummy hopper, and the test results were favorable, leading to its implementation.

last updated May 12, 2026

0710 Resolving powder clogging in the flexible container receiving tank

A case where we provided recommendations for models and layouts, along with their costs, based on hopper drawings and powder samples.

last updated May 12, 2026