Elimination of remaining carbon black emissions.

There are many varieties of materials, and we received high praise from the customer for solving everything!

last updated Feb 26, 2026

Elimination of rat holes in air transport hoppers.

Configuration and control are important! Implement it immediately, and your customers' issues will be easily resolved.

last updated Feb 26, 2026

Resolve the clogging of resin cutting powder (preliminary check conducted through lending).

We provide assistance with model selection and layout planning, as well as free loan of this equipment!

last updated Feb 26, 2026

Replaced with this device for noise control of the knocker.

A case where an air pressure of about 0.1 MPa was sufficient to achieve effective results!

last updated Feb 26, 2026

0694 Prevention of rat holes in talc (tire-related)

The troubles of bridge, rat hole, and powder clogging were resolved more easily than the customer's expectations!

last updated Feb 26, 2026

At the gypsum board dust collection hopper.

Turn on 8 Brodisks in pairs with a time delay! A case where the customer's issue was resolved without any problems.

last updated Feb 26, 2026

At the cellulose fiber hopper.

Case study of Brody disk compatibility with cellulose fibers of length 2-3mm!

last updated Feb 26, 2026

0691 Bridge prevention of HD-PE crushed material

Case study on resolving bridging issues in the hopper of high-density polyethylene grinding materials!

last updated Feb 26, 2026

Installed in the hopper at the top of the rotary valve.

Installed in a cone hopper! A case where the height was changed by installing two units each to solve the problem.

last updated Feb 26, 2026

0689 Measures for Hanging Storage of Crushed Urethane Products

Proposals for measures regarding configuration and control, along with a case where the troubles with shelf hanging were resolved.

last updated Feb 26, 2026

0688 Solving silica fume shelf hanging

Free loan of the equipment is also possible! Case studies of trouble resolution in existing plants.

last updated Feb 26, 2026

0687 Clearing blockages in the hopper of dried hop powder.

An example adopted to address expected blockages at the hopper discharge section.

last updated Feb 26, 2026

0686 Bridge elimination of alloy micropowder (small hopper)

Inquire about the properties of the contents and check the hopper drawing! Case study of solving issues with the introduction of the Brody Disk Mini.

last updated Feb 26, 2026

Elimination of the rat hole phenomenon in talc fine powder.

We will introduce a case where the rat hole phenomenon was resolved in one go by installing a Brodisk.

last updated Feb 26, 2026

Installed on the upper piping of the butterfly valve.

Consultation from a crusher manufacturer! A case study on preventing adhesion occurring in transport piping for crushed materials.

last updated Feb 26, 2026

Installed BD-20 with a large amount of air [titanium oxide].

A case where measures were implemented to address the very poor liquidity of "titanium oxide."

last updated Feb 26, 2026

Solve the bridge of citrus powder 0682.

We would like to introduce a case where we received inquiries from end users in the food industry and successfully resolved their issues.

last updated Feb 26, 2026

0681 Elastic disk: Supplied by Baiton

Introducing examples of bridge measures adopted with a small hopper!

last updated Feb 26, 2026

Good news! Powder bridge breaker for the food industry!

If the silicon disk of the machine is damaged, it will be detected by the metal detector and X-ray inspection machine!

last updated Feb 26, 2026

0680 Case Study on the Bridge Phenomenon of Inorganic Pigments

Introducing a case study on resolving bridging at the outlet of the raw material hopper in the conveying system.

last updated Feb 26, 2026

0679 Corner hopper residual measures (rice flour)

A case where the residual rice flour in the four corners of the corner hopper was resolved through aeration using this product.

last updated Feb 26, 2026

Installed on the top of the circle feeder.

An example of installing this product to address dead space that has become rat-hole shaped in the corn section.

last updated Feb 26, 2026

Resolving the bridge of fiber micro powder 0677

A case of resolving the bridge that occurred in the hopper cone section of the bag filter.

last updated Feb 26, 2026

0676 Improvement measures for sludge incineration ash bridge

We would like to introduce examples of cases where our services have been adopted for the regular maintenance of existing plants!

last updated Feb 26, 2026

In the storage tank of activated carbon + quicklime.

The durability of elastic disks is important! Here are examples of their adoption in exhaust gas treatment equipment.

last updated Feb 26, 2026

0674 Reduce loading time for jetpack vehicles.

We would like to introduce a case you consulted about, as it is taking a long time to load.

last updated Feb 26, 2026

0673 Aeration of activated carbon storage tank

Introducing a case where a blow disk was adopted in conjunction with the overhaul of water treatment equipment.

last updated Feb 26, 2026

Installed on the upper hopper of the discharge machine actitron.

Examples of installations for stabilizing emissions from lime powder silos.

last updated Feb 26, 2026

Installed in a high-temperature dust collector.

Introducing a case where a heater was installed in the dust collector hopper discharge section!

last updated Feb 26, 2026

0670 Installed in the baking soda silo

Introducing a case where we were consulted for problem-solving at a paper-related factory!

last updated Feb 26, 2026