Elimination of zinc oxide bridge and residue.

Bridge measures and residual measures for hopper corners! A case of repeat adoption.

last updated Feb 26, 2026

0688 Measures to block the short pipe under the dust collector.

Introducing installation examples of collection devices (dust collectors) for processed products from micro-grinding machines!

last updated Feb 26, 2026

Installed in the calcium carbonate supply hopper.

If we can take a look at the hopper diagram and contents, we can provide a cost-conscious introduction plan!

last updated Feb 26, 2026

0666 Installed in the dust collector hopper section / Resin cutting powder

Introducing an example of a dust collector installed for the cutting dust generated in the resin cutting process!

last updated Feb 26, 2026

0665 Installed in container tank / metal oxide / several tens of micrometers

A case where a mobile container could not discharge its contents due to the rat-hole phenomenon!

last updated Feb 26, 2026

Installed in the 0664 FRP feed tank.

Introducing a case where we are struggling with the discharge of feed!

last updated Feb 26, 2026

0663 At the hopper of the air transport machine

We can provide guidance on model selection, placement, and control according to the user's requirements!

last updated Feb 26, 2026

Installed in the wood planer powder silo.

Easily solve unsolvable powder bridges! No more expensive equipment needed.

last updated Feb 26, 2026

0661 Applicable to elastomer grinding materials

This equipment is used in various ways for bridge measures against crushed materials of various resins!

last updated Feb 26, 2026

0660 At the foundry sand regeneration facility

Most cases, such as bridges and rat holes, can be easily resolved with this equipment!

last updated Feb 26, 2026

Resolved the clog caused by the butter bento.

Our company can provide the best solutions for users based on our extensive experience!

last updated Feb 26, 2026

0658 At the raw material hopper for thermosetting resin

Introducing a case where a total of 6 Brodisk Mini units were installed in 2 stages, with 3 units each.

last updated Feb 26, 2026

0657 Measures against bridging of sticky fine powders

Guidance on the arrangement of the Brodisk and its control plan! Introducing a case that resolved the bridging of adhesive fine powder.

last updated Feb 26, 2026

0656 Bridge measures for 2-3μm fine powder

Can be used with inert gases such as nitrogen gas or argon gas instead of regular air!

last updated Feb 26, 2026

0655 Bridge measures for micro-sized resin powder.

Resolving blockages near the discharge section! Here is a case where the air ON frequency for the lower four units was increased.

last updated Feb 26, 2026

0654 Solving the bridge of PET flakes

Easily solve powder bridging! We will inform you of a suitable implementation plan considering costs.

last updated Feb 26, 2026

0653 Improvement of calcium carbonate discharge issues

Easily solve powder bridging! We will introduce case studies of BroaDisk implementation.

last updated Feb 26, 2026

0652 At the pigment hopper (with variety change cleaning)

Easily solve powder bridging! We will introduce case studies of BroaDisk.

last updated Feb 26, 2026

0651 Prevention of casein (protein) retention

Easily solve powder bridging! We will introduce case studies of BroaDisk implementation.

last updated Feb 26, 2026

0650 At the recycling plant (urethane)

Easily solve powder bridging! We will introduce case studies of BroaDisk.

last updated Feb 26, 2026

0649 Preventing bridge formation in the feed tank

Air ON with 8 Brodisks in pairs with a time difference! Introducing case studies.

last updated Feb 26, 2026

0648 Eliminate the bridge of cosmetic raw materials.

A bridge in the hopper of the quantitative feeder! After a few seconds of air ON, the bridge collapse was resolved and everything is good.

last updated Feb 26, 2026

0647 Solving the bridge of resin + titanium oxide composite products.

No effect even with hammering! Install the Brodisk and Brodisk Mini to solve the problem.

last updated Feb 26, 2026

At the screw conveyor (matcha) 0646.

Introducing a case where three Brody Disk Minis are operated simultaneously in air intermittent operation, installed on a screw conveyor!

last updated Feb 26, 2026

0645 Resolving issues with the discharge of incineration ash.

Introducing a case that solved the issue of poor incineration ash discharge with 8 Brodisk standard type (BD-15) units arranged!

last updated Feb 26, 2026

Installed in the raw material hopper of the 0644 tablet press.

Two Brody Disk Minis installed at different heights! Here is an example of installation in the raw material hopper of a tablet press.

last updated Feb 26, 2026

At the cellulose fiber hopper 0643

Increase aeration frequency! Introducing a case study that solved the "unmanageable bridge."

last updated Feb 26, 2026

At the hopper where the crushing sword mountain is installed.

Introducing a case where all four Brody disks (mini) were simultaneously turned ON/OFF! The bridge issue has been resolved.

last updated Feb 26, 2026

0641 Promoting outflow from the feed tank

Measures against rat holes! Introducing a case where a Brody disk was installed in a feed tank.

last updated Feb 26, 2026

0640 Resolving the inability to discharge incineration ash (small hopper)

Proposals tailored to the user's conditions based on past experiences! Introducing installation examples of the Brodisk Mini.

last updated Feb 26, 2026