0608 Elimination of magnesium oxide bridging and adhesion.

Install a broad disk on each inclined surface to solve the bridge and adhesion issues.

last updated Dec 24, 2025

Elimination of residue in the hopper of LDPE crushed material.

Cost-focused control! Introducing a case that eliminated rat-hole residuals.

last updated Dec 24, 2025

0606 Resolving poor iron powder leakage

Measures near the discharge area are important! We will provide you with a rational solution that meets your requirements.

last updated Dec 24, 2025

0605 Dry fine powder hopper for water-saturated clay.

Eliminating the bridge phenomenon! Introducing a case study of a dry fine powder hopper for water-saturated clay.

last updated Dec 24, 2025

0604 Due to residual resin runner crushing products

Successful results and adoption! A case of installing our product at the corners of gentle slopes and gentle slopes.

last updated Dec 24, 2025

0603 Residuals of Wallpaper Crushing Products and Bridge Countermeasures

Residual powder in the corners that the agitator can't reach! Introducing a case where it was resolved with a Brody disk.

last updated Dec 24, 2025

0602 Into the bentonite hopper

Configuration and other aspects are important! We provide detailed advice from our company to achieve problem resolution!

last updated Dec 24, 2025

0601 Attached to the hopper dryer

If you send us the hopper drawings, we can provide guidance on a reasonable layout, etc.!

last updated Dec 24, 2025

0600 At the biomass power generation plant

If you have had issues with other devices in the past or prioritize reliability, please give it a try!

last updated Dec 24, 2025

Installed in the hopper for PVC powder.

The purpose is to ensure thoroughness, especially since it is not a case of concern regarding the bridge, so it is installed only near the discharge area!

last updated Dec 24, 2025

Countermeasures for clogging of discharge parts due to attached growth.

After the introduction, there was no damage to the hopper, and operations are running smoothly without any extra burden on the on-site personnel!

last updated Dec 24, 2025

0597 Eliminate the pigment fine powder bridge in one shot.

We have solved the bridging phenomenon that occurs in the hopper of the quantitative supply screw feeder in one go!

last updated Dec 24, 2025

Example of implementation in the PS crushing material hopper.

PS recycling equipment's crushing material hopper! Here we introduce an example of how this equipment solved bridging issues.

last updated Dec 24, 2025

Installed in a conical hopper (inclination 75°)

Cannot resolve rat holes with air knockers! A case study of solving customer problems.

last updated Dec 24, 2025

0594 Control of the salt bridge

Installing a Brody Disk in a salt manufacturing plant to prevent bridging! Case study of trouble resolution.

last updated Dec 24, 2025

Used with nitrogen gas.

The subject matter is agricultural chemicals with a particle size of about 100μ! A case study of the introduction of a Brody disk.

last updated Dec 24, 2025

Installed in the lower hopper of the bag opening machine.

Installed in the lower hopper of the dismantling machine to improve discharge troubles! A case resolved by the installation position.

last updated Dec 24, 2025

0591 Solving NG (compost) in hammering.

During driving, advice on air ON time and air pressure, etc.! A case that responded to an urgent matter.

last updated Dec 24, 2025

At the hopper for supplying wallpaper crushing products.

The subject is the powder of crushed wallpaper! Here is an example of installing a blow disk at the bridge generation point.

last updated Dec 24, 2025

Example of installing a Brody Disk Mini on a weighing hopper.

Considering the amount of air! We will introduce a case where the effectiveness was verified by the customer through the loan of equipment.

last updated Dec 24, 2025

0588 Preventing rat holes in the baking soda silo

Examples of resolving issues such as "rat holes occurring" and "nozzles getting clogged"!

last updated Dec 24, 2025

Mounting on the hopper for abrasive micro powder.

Install the blow disk with a wear-resistant rubber sheet sandwiched between the blow disk and the hopper inner wall!

last updated Dec 24, 2025

Solving resin pellet clogging

Effect confirmation through the lending of the main unit! A case where the Brody Disk and controller were introduced.

last updated Dec 24, 2025

At the hopper for crushed polystyrene.

A bridge occurred in a hopper containing crushed expanded polystyrene containers! A case where it was resolved with a blow disk.

last updated Dec 24, 2025

0584 Shortening the discharge time from the silo

A total of 24 units can be installed on 4 sides! We can provide suitable implementation proposals that meet the user's requirements.

last updated Dec 24, 2025

0583 The outlet diameter is small and gets clogged → Resolved!

Install 8 units in 3 tiers above the discharge section! Introducing examples of Brody Disk Mini applications.

last updated Dec 24, 2025

At the plant of the industrial waste disposal contractor.

Installed 12 Brodisk BD-15S-B units! Introducing a case that solved discharge troubles.

last updated Dec 24, 2025

Mounting on the wheat flour hopper.

Installed 4 Brodisk BD-15S-W! Introducing examples of measures against bridge generation.

last updated Dec 24, 2025

At the graphite eccentric hopper.

Placing 3 Brodisks! Introducing a case where bridge formation was resolved with a graphite hopper.

last updated Dec 24, 2025

0579 Feed - in FRP container

Installed 4 Brodisk BD-15S-W! Introducing a case where the challenge was successfully cleared.

last updated Dec 24, 2025