At the hopper for supplying wallpaper crushing products.

The subject is the powder of crushed wallpaper! Here is an example of installing a blow disk at the bridge generation point.

last updated May 12, 2026

Example of installing a Brody Disk Mini on a weighing hopper.

Considering the amount of air! We will introduce a case where the effectiveness was verified by the customer through the loan of equipment.

last updated May 12, 2026

0588 Preventing rat holes in the baking soda silo

Examples of resolving issues such as "rat holes occurring" and "nozzles getting clogged"!

last updated May 12, 2026

Mounting on the hopper for abrasive micro powder.

Install the blow disk with a wear-resistant rubber sheet sandwiched between the blow disk and the hopper inner wall!

last updated May 12, 2026

Solving resin pellet clogging

Effect confirmation through the lending of the main unit! A case where the Brody Disk and controller were introduced.

last updated May 12, 2026

At the hopper for crushed polystyrene.

A bridge occurred in a hopper containing crushed expanded polystyrene containers! A case where it was resolved with a blow disk.

last updated May 12, 2026

0584 Shortening the discharge time from the silo

A total of 24 units can be installed on 4 sides! We can provide suitable implementation proposals that meet the user's requirements.

last updated May 12, 2026

0583 The outlet diameter is small and gets clogged → Resolved!

Install 8 units in 3 tiers above the discharge section! Introducing examples of Brody Disk Mini applications.

last updated May 12, 2026

At the plant of the industrial waste disposal contractor.

Installed 12 Brodisk BD-15S-B units! Introducing a case that solved discharge troubles.

last updated May 12, 2026

Mounting on the wheat flour hopper.

Installed 4 Brodisk BD-15S-W! Introducing examples of measures against bridge generation.

last updated May 12, 2026

At the graphite eccentric hopper.

Placing 3 Brodisks! Introducing a case where bridge formation was resolved with a graphite hopper.

last updated May 12, 2026

0579 Feed - in FRP container

Installed 4 Brodisk BD-15S-W! Introducing a case where the challenge was successfully cleared.

last updated May 12, 2026

0578 Measures for Hanging Storage of Incineration Ashes

Arranging 14 Brodisk BD-15S-B units! A case study targeting high-moisture incineration ash.

last updated May 12, 2026

Example of use with powder tea hopper

A Brody disk was installed in the residual section! The problem was resolved immediately with the use of this equipment!

last updated May 12, 2026

0576 Solution to the Rat Hole Phenomenon (Quicklime)

Introducing a case study on the implementation of a blow disk in exhaust gas treatment equipment where rat holes have occurred!

last updated May 12, 2026

0575 Alloy powder + resin powder bridge elimination

Only when it gets clogged, manually turn on the air! An example of its use as a bridge countermeasure.

last updated May 12, 2026

0574 to a lime storage silo (eccentric hopper)

Introduction case of Brodisk! I provided various advice including experiences and more.

last updated May 12, 2026

Improvement of poor outflow of food raw materials (germ, husk).

A case where a Brody disk standard type was installed just above the screw to improve work efficiency!

last updated May 12, 2026

0572 Base damage due to air knocker → Change to this equipment.

Stable operation without degradation of elastic disks! Guidance on model selection and placement, along with case studies of implementation.

last updated May 12, 2026

0571 Solve the discharge problem from the vacuum truck tank (such as quicklime, etc.)

We recommend adopting models with a large air volume! A case where the problem was solved by a blow disc.

last updated May 12, 2026

0570 Solving suction issues caused by resin chips/bridges

Installed and tested by the user! A case where this device solved the issue of being unable to perform suction transport.

last updated May 12, 2026

0569 Measures for bridge issues with resin powder

Eliminating the bridge after adding water! A case where the problem was solved with a Brody disk.

last updated May 12, 2026

Preventing bridges in PVC silos

There are virtually no instances of manual hammering! A case study on the introduction of bridge breakers.

last updated May 12, 2026

Improvement of the difficulty in discharging mixtures of seeds and fertilizers.

Guidance on compatible models and equipment layout! A rental test was conducted, and there are cases where the results were favorable leading to implementation.

last updated May 12, 2026

0566 Shredded materials from automobile interiors, etc.

The contents are resin molded products, crushed sofa seat materials, and cotton dust, etc.! Examples of issues resolved with this equipment.

last updated May 12, 2026

0565 Promoting the outflow of silica sand

We provide guidance on recommended configurations and installation! We have received high praise for cases where we can now discharge in a shorter time than before.

last updated May 12, 2026

0564 Installation on food additive containers

First, we installed it on one of the many containers! The bridge was resolved without any issues using a Brody disk.

last updated May 12, 2026

Delivery to pharmaceutical manufacturer.

A bridge occurred with the hopper! Introduction of a case where the Brody Disk Mini for pharmaceutical applications was implemented.

last updated May 12, 2026

0562 Eliminate rat holes: Acrylic resin

Installing the Brodisk standard type! We are prepared for the blockage risk caused by the sudden concentration of raw materials.

last updated May 12, 2026

0561 Eliminate the bridge in blast furnace cement.

I want to implement bridge measures in response to a trouble occurrence! Here is an example of a case where equipment was provided for free for introduction.

last updated May 12, 2026