0549 Silica Bridge Countermeasures

We would like to introduce a case where the Brodisk was adopted during the update of the hopper!

last updated Feb 26, 2026

0548 Applicable to the dehydrated cake hopper

It has been confirmed that aeration with the machine allows for discharge without clogging! Application examples of the blow disk.

last updated Feb 26, 2026

0547 Measures to prevent clogging of talc (discharge section φ50)

The blockage near the discharge section has been resolved! Please feel free to consult us about specific arrangements and controls.

last updated Feb 26, 2026

0546 Solving the bridge of urethane fine powder

We recommend the installation of three blow discs near the discharge area, which has resolved the bridging issue.

last updated Feb 26, 2026

0545 Crushed material of insulation for electric wires.

The hopper size is approximately 1000 × approximately 1500! Ultimately, 8 blow discs will be introduced.

last updated Feb 26, 2026

0544 Improvement measures for the poor discharge of granulated sugar.

Borrowing Brodisk and Brodisk Mini! The results are good and will be adopted immediately.

last updated Feb 26, 2026

0543 Special Case with Ceramic Powder

A special case where a rubber sheet with a diameter of approximately 180 mm is installed between the Brody disk and the inner surface of the hopper!

last updated Feb 26, 2026

0542 Rat hole measures for silica fume

After discussing the model and layout, the results of the implementation have been as good as expected!

last updated Feb 26, 2026

0541 Bridge measures for fibrous materials

After receiving advice on the arrangement of the Brodisk, it was introduced!

last updated Feb 26, 2026

Installed on the upper hopper of the circle feeder.

Four standard Brodisk units were installed, and their effectiveness was confirmed! They have been adopted for actual use.

last updated Feb 26, 2026

0539 Used in air transport device hopper (TiO2)

Installed in the hopper of the air transport device! Example using the standard type Brody disk (BD-15).

last updated Feb 26, 2026

0538 Bridge measures for PTFE flakes

Testing operation with 4 Brodisk Mini units! The results were good, and we will proceed with the introduction.

last updated Feb 26, 2026

0537 Residual measures for the dust collector hopper section

Since configurations are important, we kindly ask customers who are interested to please consult with us, even if it may be a bit of a hassle!

last updated Feb 26, 2026

0536 Advice on residual measures for eccentric hopper.

You tried setting the air pressure to 0.3 MPa or higher and the air ON time to about 5 seconds!

last updated Feb 26, 2026

0535 E-PVC bridge measures

The results of the usage are excellent, and we will implement it immediately! Taking into account the various conditions of our customers, we will guide you on the arrangement of the equipment and the control methods.

last updated Feb 26, 2026

0534 Preventing bridging of particles approximately a few mm in size [rectangular prism]

Bridge measures at the hopper discharge section! Introducing a case study of the delivery of a blow disc.

last updated Feb 26, 2026

0533 Large silo for coal ash (fly ash)

Install our Brodisk! We have received high trust regarding its effectiveness and durability.

last updated Feb 26, 2026

0532 Aeration of alkaline agents and hydrated lime silo

Manufactured with thoroughly selected materials and processes! Introducing case studies of Brody disks.

last updated Feb 26, 2026

0531 Prevention of adhesion of urethane pellets

To prevent adhesion, it is effective to spray air at high pressure! Here are examples of the installation of blow discs.

last updated Feb 26, 2026

0530 Delivery to the manufacturer of quasi-drugs: Brody Disk Mini

Special Brody Disk Mini! Various documents requested by the customer will also be submitted in accordance with the delivery.

last updated Feb 26, 2026

0529 Improvement of poor outflow of sludge incineration ash

Resolved issues where insufficient remaining contents in the silo caused discharge failures, preventing truck loading!

last updated Feb 26, 2026

0528 Solving the discharge issues of magnesium oxide-based powder.

Three standard Brodisk (BD-15 type) units were installed in the hopper and testing was conducted.

last updated Feb 26, 2026

0527 Rat hole measures in the upper hopper of the quantitative supply device.

The subject is a very poorly flowing fine powder! This is an example of a substance with properties similar to titanium dioxide.

last updated Feb 26, 2026

0526 Bridge measures for Sic fine powder

An example of lending out the actual Brody Disk Mini and Brody Disk first at the customer's request.

last updated Feb 26, 2026

Measures against the adhesion growth of resin micropowder

A case where it was judged to be good due to the absence of attachment growth, and multiple Brody disks were introduced.

last updated Feb 26, 2026

0524 At the recycling plant

Install a total of 12 standard Brodisk units with varying heights, and sequentially turn on the air with a time delay for every two units!

last updated Feb 26, 2026

0523 Attached to a small hopper for quicklime.

Easy and economical installation! Introducing cases where troubles were resolved by the Brody Disk.

last updated Feb 26, 2026

The silicone disc boasts excellent durability.

Preparation of sample pieces is also possible! Here are examples of cases where the Brody disk and controller have been adopted.

last updated Feb 26, 2026

0521 Bridge measures for feather powder (high moisture content)

Here is an example of a case where a blow disk was adopted in part of the drying equipment!

last updated Feb 26, 2026

0520 Resolution of rat holes in aluminum hydroxide

We would like to introduce a case that has been consulted by users who are already using our Brodisk!

last updated Feb 26, 2026