0518 Repurposing the talc hopper, bridge countermeasures

Especially, no welding is required, and it can be easily installed! Examples of using the Brody disk.

last updated Dec 24, 2025

0517 φ600 (discharge section φ50) for air transport hopper

Installed two standard Brodisks and two Brodisk Minis! A case where the clogging was resolved.

last updated Dec 24, 2025

0516 At the recycling toner factory

Introducing a case study of a factory that is recycling toner cartridges for laser printers.

last updated Dec 24, 2025

0515 Resolve the blockage in the transport piping.

Powder blockage in transport piping! Introducing a case study where the Brody Disk Mini was adopted.

last updated Dec 24, 2025

0514 Measures to prevent clogging of titanium dioxide

Easily solved with Brodisk! We will provide guidance on selecting models and arrangements that meet the user's requirements.

last updated Dec 24, 2025

0513 Cornstarch - Starch Bridge Prevention

Using a Brodisk for bridge measures! Positive results and a case where it was purchased including the controller.

last updated Dec 24, 2025

Installed in a tank of calcium carbonate-based materials.

A total of 6 standard Brodisk units will be installed! We will provide a rational selection and layout plan for the models.

last updated Dec 24, 2025

Installed on the hopper with internal fluororesin coating.

Measures against rat holes! Introducing a case of fluororesin coating and the installation of a brodie disk.

last updated Dec 24, 2025

0510 Prevention of retention in the eccentric hopper

Compliance with the Food Sanitation Act! Here is an introduction to cases where Brody disks and controllers have been used.

last updated Dec 24, 2025

0509 Measures against rat holes in dehydrated cakes

Confirmed effectiveness with manual air injection! The test results are good, and this is a case where it was adopted along with the controller.

last updated Dec 24, 2025

0508 Example of Rat Hole Solution for Incineration Ash

Sequentially turn on two Brodisks with a time delay! A case of resolving a problem.

last updated Dec 24, 2025

0507 Measures for Preventing Adhesion of Chemical Substances

We will promptly respond to your request for lending this equipment and providing sample pieces to confirm the effectiveness!

last updated Dec 24, 2025

0506 Quantitative supply machine hopper for lime powder, etc.

Future installation of additional Brodisk is also possible! Examples of installations with Brodisk and controllers.

last updated Dec 24, 2025

0505 At the testing equipment of the development department

The hopper has been deformed into a bumpy shape due to hammering! We received high praise for its significant improvement compared to before.

last updated Dec 24, 2025

0504 At the grain crushing device

Sample pieces are also available! We received high praise from users for "excellent results."

last updated Dec 24, 2025

0503 Heavy calcium carbonate - using a small hopper

Testing conducted by users! Introduction of cases where the Brodisk Mini and controller were implemented.

last updated Dec 24, 2025

0502 Prevention of Iron Oxide Powder Bridging

The discharge diameter is φ1000, and since the circumference is large, the blow disks are installed in two tiers with a slight height adjustment for the four pieces!

last updated Dec 24, 2025

Clogging of crushed elastomer (TPO) products.

The results are very good! I would like to introduce a case where a total of 3 items were adopted.

last updated Dec 24, 2025

0500 Installed in the high-temperature hopper for wood powder.

We will introduce a case where measures against rat holes were adopted in a hopper containing a large amount of moisture-rich wood powder!

last updated Dec 24, 2025

0499 Installation on activated carbon and quicklime silos.

Air aerators are important for placement! We will provide advice on selecting the appropriate model and planning the layout according to the conditions.

last updated Dec 24, 2025

0498 Prevention of clogging of flake-shaped chemical products

The discharge issues have been resolved, and operations are running smoothly! It is possible to provide examples of arrangements and controls that are considered suitable, including costs.

last updated Dec 24, 2025

0497 Solving the difficulty of discharging film crushing material.

The trouble was resolved quickly! After suggesting the installation of one unit on each side for the corner hopper, it was implemented.

last updated Dec 24, 2025

0496 Relatively heavy powder rat hole measures

The results are very good! We can provide consultations on various materials, so please feel free to contact us.

last updated Dec 24, 2025

0495 Attached to transport container box

The results are very good! Smooth discharge and flow of powder and granules can be expected with this equipment.

last updated Dec 24, 2025

0494 To the upper chute of the auger filling machine

The results are good! We would like to introduce a case study of the factory that fills powdered food.

last updated Dec 24, 2025

Installed in the hopper section of the gypsum powder dust collector.

We will help you with a specific layout plan! The installation location is important, so please feel free to contact us.

last updated Dec 24, 2025

0492 Change existing aeration to this machine (calcium oxide)

The subject is quicklime! After guiding you on the ideal arrangement and control methods, we have received your adoption.

last updated Dec 24, 2025

0491 Circle feeder upper silo (charcoal calcium)

Based on past experiences, we can provide suitable arrangements and control examples tailored to the individual conditions of our customers.

last updated Dec 24, 2025

Improvement of poor rubber powder dust emission.

As a bridge measure, one standard Brody disk is installed on each side, totaling four! The results are, of course, good.

last updated Dec 24, 2025

0487 Measures to Address Residual Film Grinding Material

Introduction of a case where an agitator was avoided on the accumulation surface (3 surfaces) and a broad disk (standard type) was installed!

last updated Dec 24, 2025