Installed in the hopper section of the gypsum powder dust collector.

We will help you with a specific layout plan! The installation location is important, so please feel free to contact us.

We would like to introduce a case where a bridge occurs in the dust collector hopper, which led to your adoption of our solution. The system continuously discharges, and the basic setup involves installing a total of four units, one on each side just above the discharge area. However, in this case, we have observed that "there is always a significant amount of residual material in the four corners, which can suddenly drop and increase the risk of bridging." Therefore, we have prioritized the arrangement to address this issue. Our company provides assistance with specific layout planning. Although it involves air injection, the installation location is crucial. Please feel free to contact us. [Overview] ■ Hopper dimensions: Approximately 2000×2400 ■ Discharge area dimensions: 200×200 ■ Material: Gypsum dust ■ Brodie disk arrangement - One unit on each side just above the discharge area - Additionally, one unit on each side, positioned towards the corners above, for a total of 8 units installed *For more details, please refer to the PDF document or feel free to contact us.

basic information

【Product Specifications】 ■ Brody Disk "BD-15S-B": 8 pieces ■ Controller "C-SV4": 1 unit 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disk of this equipment excels in strength and durability. We believe you will understand this once you use it! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.