0401 Improvement measures for existing users (calcium hydroxide)

After the implementation of the improvement measures, we have received feedback that there are no longer any rat holes at all!

last updated Oct 04, 2024

0402 First, visit our company for your loan request (resin recycled material).

Frequent bridge failures occur, so I want to resolve this as soon as possible! Case study of Brodisk Mini adoption.

last updated Oct 04, 2024

0403 Bridge measures for crushed resin tube products

Case study of adopting Brody Disk Mini for bridge measures in resin tube crushing products.

last updated Oct 04, 2024

0404 Measures against rat holes in catalyst raw materials

A case where Brodisk was adopted repeatedly for the expansion of the line.

last updated Oct 04, 2024

0405 No knockers and aeration issues, solved with this equipment!

Not only in this case, but most users are improving powder discharge using this device alone!

last updated Oct 04, 2024

0406 Elimination of residual silica-based powder

This is an introduction to a case that was implemented due to an incident where the processed material remained on the R surface of the rounded hopper.

last updated Oct 04, 2024

0407 Measures to Address Clogged Wet Urethane Powder

The results were good, so we introduced the items we lent out as they were! This is a case for a recycling factory.

last updated Oct 04, 2024

0408 Bridge measures using cement and silica fume

After guiding the engineering company on the placement of the broad disk, it was implemented! The results are, of course, favorable.

last updated Oct 04, 2024

0409 Using a fertilizer mixing scale

We recommend testing by borrowing the equipment, and you were able to confirm its effectiveness!

last updated Oct 04, 2024

0410 Installed in the storage chute section for cement and fly ash.

Simultaneously generates vibrations from the silicone disc during aeration! This is a project adopted for measuring equipment.

last updated Oct 04, 2024

0412 Measures to Prevent Clogging of Tapioca Flour

The result is OK! This is a project that adopted the load disk (mini) and controller.

last updated Oct 04, 2024

0413 Measures against the adhesion bridge of waste gypsum powder and calcium carbonate.

Solving the frequent issues with bridges! We will introduce case studies from our recycling-related customers.

last updated Oct 04, 2024

Preventing bridges caused by the influence of the butterfly valve.

The target material is resin powder! It has been adopted to prevent bridging caused by the opening and closing of the butterfly valve at the discharge section.

last updated Oct 04, 2024

0415 Resolving blockages of lime-based stabilizers

Two Brodisks facing each other, divided into three locations, turned ON sequentially with a time difference! The blockage has been resolved.

last updated Oct 04, 2024

0416 Measures to prevent blockage in the transport hopper for health food powder.

Air injection along the inner surface of the hopper from around the silicon disk to eliminate powder bridging and blockages.

last updated Oct 04, 2024

0417 Bridge Measures for Powder Coatings

If you are having trouble with bridges or rat holes, please try this device!

last updated Oct 04, 2024

0418 Measures for rice flour bridge

The controller, which has 4 built-in solenoid valves, sequentially turns on the air for the blow discs two at a time with a time delay!

last updated Oct 04, 2024

0419 Resolving blockages of crushed material + virgin raw materials

We have been evaluated as having resolved the issue of clogging, and you have adopted our equipment.

last updated Oct 04, 2024

0420 Bridge measures for alumina powder

We recommend changing the height of the Brodisk Mini and installing two units, which you have adopted.

last updated Oct 04, 2024

0421 Bridge measures for iron powder

Installing the Brodisk is easy! Especially with a small hopper, you can easily conduct tests.

last updated Oct 04, 2024

0422 Poor discharge from bulk container

We have decided to adopt it for all containers used in truck transportation!

last updated Oct 04, 2024

Measures for the dust collector hopper for the grinding machine.

After actually seeing it, you judged, "This should work." We have implemented it.

last updated Oct 04, 2024

0424 Spray drying - Bridge prevention for powdered products

The subject matter is the powdered product after spray drying of a certain compound! Examples of use for bridging and residual measures.

last updated Oct 04, 2024

0434 was introduced at the refinery.

Adoption after testing introduction to small storage tanks! It is aimed at materials with soil-like fluidity.

last updated Oct 04, 2024

Installed in the hopper for elastomer grinding material.

Introducing the Brody Disk Mini to address supply issues with the hopper dryer! We will provide advice on placement and other matters.

last updated Oct 04, 2024

0432 Measures against rat holes in waste gypsum powder

Introducing a case where "BD-20," which has a high air volume, was adopted to address issues with the waste gypsum powder silo!

last updated Oct 04, 2024

0431 Recycled resin material (sheet crushed product)

Even if you set up multiple units, the costs are limited! If you provide the hopper diagram and information about the contents, we will guide you with a reasonable layout plan and operating sequence.

last updated Oct 04, 2024

0430 Improve funnel flow

Introducing a Brody disk for funnel flow improvement! We will also provide information on operating methods tailored to the user's conditions.

last updated Oct 04, 2024

0429 Promote the discharge of fly ash

We have adopted a blow disk to improve the emission defects occurring on the fly ash side!

last updated Oct 04, 2024

0428 In the zeolite rat hole

To improve the rat hole phenomenon! One standard Brody disk has been installed on each side.

last updated Oct 04, 2024