Improvement of discharge issues from the rubber powder hopper.

We have improved the poor flow of soft rubber particle powder in small hoppers!

last updated Jan 10, 2025

0186 Prevention of adhesion of wastewater treatment chemicals

We can solve problems at a low cost, and it has received great acclaim!

last updated Jan 10, 2025

0185 Install this bridge breaker on the hopper of the measuring filling device.

The device has been installed for bridge measures, allowing for stable weighing and filling!

last updated Jan 10, 2025

0184 Promotion of discharge from the corn starch hopper

To improve the discharge of corn starch powder, a standard Brody disk has been installed!

last updated Jan 10, 2025

Installed on the upper hopper of the circle feeder.

The installation of this bridge breaker solved the problem in one go!!

last updated Jan 10, 2025

0189 Bridge Measures for Plastic Compounds

Installed a standard blow disk to address discharge issues from the hopper for plastic compounds.

last updated Jan 10, 2025

0191 Mass flow conversion of small hoppers

The additional installation of the Brodisk has resolved the funnel flow.

last updated Jan 10, 2025

0192 Measures for the bridge of the titanium dioxide hopper in a rubber products factory.

By sequentially turning on the Brodisk with a time delay, the titanium dioxide powder is fluidized, resolving the discharge issues.

last updated Jan 10, 2025

0193 Prevention of rat holes in the bulk bag receiving silo

This is an introduction to a case study on preventing rat holes in bulk bag receiving silos!

last updated Jan 10, 2025

Installed on the suction hopper for crushed products from the granulator.

Eliminate the bridges that were occurring with a "sticky feeling" due to the material temperature using a bridge breaker!

last updated Jan 10, 2025

0195 Measures for the bridge of the ash hopper in biomass boilers

Introducing examples related to biomass boilers using special fuels at a paper mill!

last updated Jan 10, 2025

0196 Prevention of bridging in secondary battery materials

Applying a Brody disk to prevent bridging in the hopper of secondary battery material powder!

last updated Jan 10, 2025

Improvement of discharge from a hopper of sand with some moisture content.

By installing a hopper, air aeration and vibration are generated, resolving discharge issues of the mixture of silica sand, water, and chemicals.

last updated Jan 10, 2025

0198 Stabilization of emissions equivalent to granular activated carbon.

Clear the issues with the combined effects of wall aeration and vibration!

last updated Jan 10, 2025

Improvement of discharge from gelatin powder container

By installing a Brody disk standard type and using a controller with a built-in solenoid valve to sequentially flow air, the issue of poor discharge is resolved.

last updated Jan 10, 2025

Elimination of the bridge in recycled plastic raw materials.

The emission issues at the resin recycling plant have been completely resolved!

last updated Jan 10, 2025

0151 Rat Hole Measures - Chemical Material Manufacturer

Easily resolve troubles! We will propose installation examples and operating conditions that match the customer's requirements.

last updated Jan 10, 2025

The bridge of titanium oxide has been eliminated.

Economical and easy to install! Can be used in various applications, even with troublesome powders like TiO2!

last updated Jan 10, 2025

0153 Promoting the outflow from the cement silo.

Install multiple blow discs to promote the outflow from the cement silo!

last updated Jan 10, 2025

0154 Bridge elimination at the top of the screw feeder.

Based on past experiences, we provide guidance on suitable installation locations and operating examples for each case!

last updated Jan 10, 2025

0155 Promotion of Olefin Resin Discharge

Solve problems with the installation of bridge prevention equipment! We can provide suitable guidance based on past experience!

last updated Jan 10, 2025

0156 Installed on the jet mill grinding product collection bag filter.

Improving the discharge and outflow of powdered materials such as rat holes and bridges!

last updated Jan 10, 2025

0157 Masterbatch Bridge Countermeasures

The issue of frequent bridge occurrences is resolved by the installation of ridge breakers.

last updated Jan 10, 2025

0158 Bridge measures for fly ash silos at power plants

Addressing rat-holing and bridging phenomena of powder inside the silo due to the vibration of the rubber disk.

last updated Jan 10, 2025

0159 Prevention of bridge formation in rice bran mixed feed

Raw materials that are easy to bridge with raw bran can resolve issues through installation!

last updated Jan 10, 2025

0160 Measures to Prevent Adhesion of Fine Carbon Dust

Solving challenges in powder handling plants! Introducing case studies on measures against the adhesion of fine coal due to moisture.

last updated Jan 10, 2025

0170 Bridge measures for fibrous powder raw materials

Introducing case studies of powder hoppers for manufacturing plants of ceramics, tiles, etc.!

last updated Jan 10, 2025

0169 Promotion of Emission of Ultra-High Molecular Weight Polyethylene

Introducing a case that promoted the discharge of ultra-high molecular weight polyethylene raw materials from a small hopper!

last updated Jan 10, 2025

Preventing bridging and rat holes in the hopper before the drying process.

Introducing a case of quicklime bridge in a poor liquidity state and measures taken against rat holes!

last updated Jan 10, 2025

Implementation of bridge measures for dried sludge.

Introducing examples of promoting the discharge of dried sludge from silos in wastewater treatment facilities!

last updated Jan 10, 2025