0650 At the recycling plant (urethane)

Easily solve powder bridging! We will introduce case studies of BroaDisk.

last updated May 12, 2026

0649 Preventing bridge formation in the feed tank

Air ON with 8 Brodisks in pairs with a time difference! Introducing case studies.

last updated May 12, 2026

0648 Eliminate the bridge of cosmetic raw materials.

A bridge in the hopper of the quantitative feeder! After a few seconds of air ON, the bridge collapse was resolved and everything is good.

last updated May 12, 2026

0647 Solving the bridge of resin + titanium oxide composite products.

No effect even with hammering! Install the Brodisk and Brodisk Mini to solve the problem.

last updated May 12, 2026

At the screw conveyor (matcha) 0646.

Introducing a case where three Brody Disk Minis are operated simultaneously in air intermittent operation, installed on a screw conveyor!

last updated May 12, 2026

0645 Resolving issues with the discharge of incineration ash.

Introducing a case that solved the issue of poor incineration ash discharge with 8 Brodisk standard type (BD-15) units arranged!

last updated May 12, 2026

Installed in the raw material hopper of the 0644 tablet press.

Two Brody Disk Minis installed at different heights! Here is an example of installation in the raw material hopper of a tablet press.

last updated May 12, 2026

At the cellulose fiber hopper 0643

Increase aeration frequency! Introducing a case study that solved the "unmanageable bridge."

last updated May 12, 2026

At the hopper where the crushing sword mountain is installed.

Introducing a case where all four Brody disks (mini) were simultaneously turned ON/OFF! The bridge issue has been resolved.

last updated May 12, 2026

0641 Promoting outflow from the feed tank

Measures against rat holes! Introducing a case where a Brody disk was installed in a feed tank.

last updated May 12, 2026

0640 Resolving the inability to discharge incineration ash (small hopper)

Proposals tailored to the user's conditions based on past experiences! Introducing installation examples of the Brodisk Mini.

last updated May 12, 2026

0639 Promoting the discharge of water treatment chemicals

We will introduce a case where four units were simultaneously turned on for cost efficiency, using the standard type of blow disk.

last updated May 12, 2026

0638 Solve rat holes with a gentle slope hopper.

Place the Brody Disk Mini to mitigate the risk of clogging at the discharge port! Introducing a case study on solving rat holes.

last updated May 12, 2026

0637 In the hopper of carbon flakes + carbon fine powder.

Solving user challenges in one go! Introducing examples of improving carbon fluidity.

last updated May 12, 2026

0636 Resin grinding products (mixed fine powder, granules, and flakes)

Introducing a case where we assisted with the selection and placement planning of Brodisk models.

last updated May 12, 2026

0635 Bridge measures for sawdust (manual air ON)

Introducing a case where we were able to solve a customer's issue in one shot with Brodisk.

last updated May 12, 2026

0634 Bridge elimination of cake-like materials

Preventing bridge formation with cake-like materials! Introducing a case where four Brody Disk Minis were installed.

last updated May 12, 2026

Installed in the fly ash storage tank.

Installed in the fly ash silo! Introducing a case where a heater was additionally installed along with the blow disk.

last updated May 12, 2026

0632 Resolving blockages in gypsum (products)

Measures against clogging of gypsum powder that tends to remain in the four corners! A case study of installing a brody disk.

last updated May 12, 2026

At the home appliance recycling factory.

Proposing installation plans based on information about contents and hoppers! Introducing examples of product rentals.

last updated May 12, 2026

0630 Metal powder bridge countermeasures

Easily solve unsolvable powder bridge issues! Introduction of Brodisk installation cases.

last updated May 12, 2026

0629 At the concrete secondary products factory

Installed one standard Brodisk and a total of four! Introducing a case study on improving cement discharge issues.

last updated May 12, 2026

0628 Frequent occurrence of elastomer bridges → Resolved

Immediate equipment rental! Introducing examples of stable operations after implementation.

last updated May 12, 2026

0627 Measures for Compaction Prevention of the Drug Acceptance Hopper

Avoid the risk of powder compaction and bridging! Here are some successful cases where it has been adopted.

last updated May 12, 2026

0626 Measures to prevent the adhesion of aluminum hydroxide

Air ON with 8 Brodisks in pairs with a time difference! Introducing a case study that solved the user's challenges.

last updated May 12, 2026

0625 Bridge measures for TiO2

Various changes to air pressure and air ON time! Introducing examples of how we solved customer problems.

last updated May 12, 2026

0624 At the de-salting device for incineration exhaust gas

Examples of our equipment being widely adopted in various fields using quicklime, other chemicals, fly ash, etc.!

last updated May 12, 2026

Installed in the flexible container receiving hopper.

We will introduce the installation of the flexible container receiving hopper in a column format!

last updated May 12, 2026

0622 Scale-up project (metal oxides)

We will introduce a case where control sequentially turned on the air for 8 blow discs in pairs with a time difference!

last updated May 12, 2026

0621 Foundry, improving dust accumulation

Configuration is important! Here are examples of trying out the Brody Disk on its own.

last updated May 12, 2026