Analysis Case: Daily Necessities

Analysis Case: Daily Necessities
Here is an example of the analysis of daily necessities.
91~120 item / All 129 items
-
Measurement of phosphorescence lifetime and phosphorescence using a fluorometer.
Phosphorescence measurement is possible with a fluorometer.
last updated
-
Structural analysis using NMR (nuclear magnetic resonance) spectroscopy.
Measurement of the light solvent as is.
last updated
-
[Analysis Case] Structural Analysis of Tape Adhesives by GC-MS
Structural analysis of adhesives is possible using pyrolysis GC/MS method.
last updated
-
[Analysis Case] Evaluation of Component Distribution in Skin Cross-Section
It is possible to visualize molecular information of organic and inorganic substances.
last updated
-
[Analysis Case] Component Analysis of Food Wrap Film Surface
Analysis of the compositional changes on the surface of the wrap film before and after heating using TOF-SIMS.
last updated
-
[Analysis Case] CFRP (Carbon Fiber Reinforced Plastic) Internal Fiber Orientation Analysis
Case study of CFRP analysis using X-ray CT.
last updated
-
[Analysis Case] Evaluation of the Imidization Reaction of Polyimide
The degree of imidization due to differences in heating conditions can be evaluated using XPS.
last updated
-
[Analysis Case] Composition Analysis of UV Curing Resin
The identification capability is enhanced when combined with soft ionization methods.
last updated
-
[Analysis Case] Evaluation of Glass Fiber Reinforced Plastic using X-ray CT and GC/MS
Evaluation of GFRP is possible according to the purpose.
last updated
-
[Analysis Case] Investigation of the Causes of Yellowing in Polyurethane
By using PDA and MS in LC, it is possible to qualitatively analyze colored extracts.
last updated
-
[Analysis Case] Qualitative and Structural Analysis of Resin (Synthetic Polymer)
Insights into molecular structure can be obtained through combined analysis using FT-IR and thermal decomposition GC/MS.
last updated
-
[Analysis Case] Evaluation of Curing Degree of UV-Cured Resin by FT-IR
By capturing changes in functional groups, it is possible to evaluate the curing degree of UV-curable resins.
last updated
-
[Analysis Case] Binding State Mapping by XPS
It is possible to evaluate the distribution of surface contamination and surface treatment on samples with mm-order precision.
last updated
-
[Analysis Case] Structural Analysis of Non-Woven Fabric Masks
Comparison of structures before and after mask use using X-ray CT.
last updated
-
[Analysis Case] Imaging Analysis of Antimicrobial Agents on Antimicrobial Coating Surfaces
Comparison of the state before and after treatment of antibacterial coating using TOF-SIMS.
last updated
-
[Analysis Case] Component Analysis of Disinfectant Alcohol
Comparison of components other than the main agent ethanol in each product using chromatography.
last updated
-
[Analysis Case] Wide-area Quantitative Mapping using XPS
It is possible to evaluate the composition distribution in an area of up to 70×70mm.
last updated
-
[Analysis Case] Analysis of Bacteria Using DNA Analysis
We will analyze the bacteria in the sample from DNA without isolation or culture.
last updated
-
Observation of structural changes in metallic materials through tensile testing using in situ X-ray CT.
Capable of evaluating three-dimensional structural changes according to tensile stress.
last updated
-
[Analysis Case] Qualitative Analysis of Fluorinated Gases
Qualitative analysis of specific freons (CFC/HCFC) and alternative freons (HFC) is possible.
last updated
-
[Analysis Case] TEM Analysis under Atmosphere Control and Cooling (B0156)
Observation with a high-resolution SEM equipped with FIB without atmospheric exposure (controlled atmosphere)!
last updated
-
[Analysis Case] Identification Analysis of Pigments by Direct MS Method (C0611)
Estimate the molecular weight, chemical formula, and structural formula of pigments using a high-resolution mass spectrometer!
last updated
-
[Analysis Case] Evaluation of Mechanical Properties of Hair Cross-Sections Prepared by Microtome Method
It is possible to evaluate the elastic modulus of the internal structure of soft materials.
last updated
-
[Analysis Case] Three-Dimensional Structural Analysis of 3D Printed Objects
We will utilize the measurement and analysis of the product's three-dimensional structure for quality control!
last updated
-
[Analysis Case] Dynamic Viscoelastic Evaluation of PDMS using AFM
Introduction to the evaluation of in-plane distribution of viscoelasticity and frequency dependence!
last updated
-
[Analysis Case] Evaluation of Composition Distribution of Organic Films by Raman Mapping
It is possible to visualize the in-plane distribution of organic components (inorganic components can also be included)!
last updated
-
[Analysis Case] Evaluation of Crystallinity of Carbon Materials Using Raman Mapping
It is possible to visualize the in-plane distribution of materials and crystallinity non-destructively!
last updated
-
[Analysis Case] (S)TEM Observation of Polymer Materials Using Electronic Staining
We will introduce examples of observing polymer materials using SEM-STEM and (S)TEM!
last updated
-
[Analysis Case] (S)TEM Observation by Negative Staining
Examples of morphological observation of liposomes, CNF, microparticles, proteins, etc.!
last updated
-
[Analysis Case] Fine Structure of Hair Cross-Section (S)TEM Analysis
We will introduce examples of observations of hair cell membrane complexes (CMC)!
last updated