MONOVATE(旧：日東金属工業) 八潮工場 Official site

Sanitary valve with a zero pocket structure! It is a valve that excels in sanitary properties, with no concerns about liquid accumulation or contamination.

○Specifications○ Contact part (silicone tube)…Special silicone (compliant with food sanitation laws) Non-contact part…SUS304・resin Size…1S, 1.5S, 2S rules Pressure resistance…0.45MPa Heat resistance…See separate table Vacuum resistance… -0.02MPa Durability…30,000 cycles (conditions: pressure: 0.5MPa, temperature: room temperature) Connection…IDF ferrule clamp Operation…Manual: 90° rotating lever handle type *An automatic type is also available.

Control valve for powder and granular materials! There are no sliding parts or obstacles on the passage surface, so it does not damage the contents.

Casing material... Choose from SUS316L or aluminum + fluororesin treatment Sleeve valve... Polyester with antistatic treatment Drive... Manual Diameter and connection size... See separate table * Uses Osame Industry 20° type low-pressure helix. * The packing will be flat packing. * Please contact us for other sizes.

A must-read for optimal valve selection! Please use this as a reference when considering the purchase of stainless steel containers!

【Content】 ○What is a valve? Types, connections, operation, selection ○Types of valves Ball valve, diaphragm valve, tank bottom valve, slide valve (shutter valve), butterfly valve, others *The valves mentioned here are just a few examples. ○Q&A - I want to flow a solvent; are there valves with chemical resistance? - Are there valves that can be disassembled? - What kind of valves are you using? - I want to attach a threaded joint valve to a ferrule joint. - I want to adjust the flow rate. - Are there valves for tablets?

Accessories for stainless steel containers: 'valve', 'viewing window', 'flashlight', 'shutter valve', 'pipe connection hose adapter'

Welding Half Coupling【L14AMD】 Cap Half Coupling【16AMD】【16AMD (11)】 Gasket【40MP】 Clamp Band【13MHHM-LW】 Elbow【2CMD】 Hose Fitting【14MDHR】 Pipe with One Half Coupling【1FP】 Pipe with Two Half Couplings【2FP】 Socket/Nipple Plate Flange【JIS】 Shutter Valve【SH】 A valve for powder and granular materials that can be easily disassembled and assembled. It can open and close smoothly due to the Teflon sheet. Manual Two-Way Ball Valve【BV】 A valve for sanitary fluids. Tank Bottom Valve A diaphragm valve directly attached to the bottom of a container. Sight Glass【NM】 A sight glass that attaches to a half coupling. Wiper Sight Glass【NMW】 A sight glass with a wiper that can clear fog and dirt. Flashlight (Case Type)【LC】 An LED light with a case that attaches to a sight glass, protecting the light from corrosive solutions and dirt. Flashlight (Arm Type)【LA】 An LED light that attaches to a sight glass and allows for adjustment of the irradiation angle.

Ideal for storing powders that dislike humidity! This is a stainless steel bottle used for storing and transporting chemicals and reagents.

Material: SUS316L Capacity: 0.1L, 0.2L, 0.5L, 1L Gasket: Silicone rubber Cap: Hurlock

A funnel-shaped stainless steel container that can discharge contents without any residue!

Custom-made (Special Order) Examples ● We will change to the optimal shape for the state of the contents (liquid, powder, granules)! - Modification of drain size and shape - Selection of the optimal hopper angle for discharging contents (60° to 135°) - Creating an inlet on the lid Specifications Model: HT-ST, HT-CTH, HT-CTL Material: SUS304 Drain: 1.5S rule 【HT-ST】: 4L~35L With lid: Stock lid 【HT-CTH】: 4L~35L With lid: Sealed lid With packing: Silicone (compliant with Food Sanitation Act) 【PQA】 With catch clip 【HT-CTL】: 10~35L With lid: CTL lid With packing: Silicone (compliant with Food Sanitation Act) 【PQL】 With lever band

A stainless steel container that allows for smooth discharge of contents and movement between processes!

Examples of Custom-Made (Special Order) Support ● We will modify to the optimal shape for piping and contents! - Height and drain tailored to connecting equipment - Selection of the optimal hopper angle for discharging contents (60° to 135°) - Adding a handle to the lid - Installing a viewing window or level gauge for checking contents Specifications Model: HT-ST-L, HT-CTH-L, HT-CTL-L Material: SUS304 Drain: 1.5S~2S handle With casters: SUS urethane wheels (Two with internal stoppers) 【HT-ST-L】: 20L~500L With lid: Stock lid 【HT-CTH-L】: 20L~300L With lid: Sealed lid With gasket: Silicone (compliant with Food Sanitation Act) 【PQA】 With catch clip 【HT-CTL-L】: 20L~300L With lid: CTL lid With gasket: Silicone (compliant with Food Sanitation Act) 【PQL】 With lever band

Stainless hopper ideal for filling machines, custom-made to fit your equipment.

Material...SUS304 (Option: Can be changed to SUS316L.)

This is a stainless steel container that allows for the addition of raw materials to the equipment while heating or cooling!

- The type and size of the drain can be changed. - The hopper angle can be adjusted according to the contents and specifications. Specifications: Material: SUS304 Capacity: 4L to 35L The lid can be selected from "ST" or "CTL." Drain: 1.5S rule Jacket section nozzle: 1S rule *Pressure adjustment is not possible.

It is a stainless steel container (with legs) that can be discharged while being heated or cooled!

Custom-made (Special Order) Examples - Change of discharge nozzle - Change of dimensions - Change material to SUS316L - Installation of viewing window - Surface treatment processing (electropolishing, coating) Specifications Material: SUS304 (stainless steel) Drain: 1.5 to 2S rule Jacket section nozzle: 1S rule Caster: SUS + urethane wheels (2 with internal stopper)

No accumulation of contents, dirt, or cleaning solution! A discharge chute that works great when using the inverted lifter! Custom-made to suit your needs!

●Custom-made (special order) options available! Examples) - Change of discharge nozzle type and size - Change of hopper angle θ (60°~135°) - Production with an eccentric hopper - Installation of a viewing window Applicable containers Model "ST/CTL" sizes 36~635 Specifications Material: SUS304 With gasket: PTFE With band: SUS304

Greatly active when using the inversion lifter! Custom-made options are available to suit your needs, supporting the discharge of contents!

● Custom-made (special order) options available! Examples) - Change of discharge nozzle type and size - Change of hopper angle θ (60°~135°) - Production with an eccentric hopper - Installation of a viewing window Applicable containers Model "ST/CTL" sizes 24~635 Specifications Material: SUS304 With gasket: Silicone (compliant with food sanitation law) [PQL] * Sizes 565~635 will be [PQB]. With band: SUS304 Sizes 24~39 use lever bands, while sizes 43~635 use split bands.

Stainless steel bottle! Convenient for storing and transporting chemicals and other substances using the Heller method!

Material: SUS304 Capacity: "PSH" 2L, 5L, 10L "PSF" 1L, 2L Gasket: Silicone rubber Cap: Heller

Standard stirring unit! Stainless container that can be equipped with a stirrer!

Custom-made (Special Order) Examples - Change of nozzle - Material to SUS316L - Installation of a viewing window - Installation of a ball valve Specifications Material: SUS304 Capacity: 35–200L Packing: Silicone [PQA][PQB] Nozzle: Rule from 1S to 2S Caster: SUS urethane wheels (with 2 internal stoppers) *The mixer will be quoted separately after consultation.

Stirring while maintaining temperature or cooling! Stirring unit with a jacketed stainless steel container!

Custom-made examples: - Change the nozzle to fit the counterpart's equipment - Made of SUS316L - Adjust the height of the legs to match the equipment - Install parts for internal inspection of the container Specifications: Material: SUS304 Capacity: 35–200L Drain: 1S–2S rule Gasket: Silicone [PQA][PQB] Caster: SUS urethane wheels (with 2 internal stoppers) *The stirrer will be quoted separately after discussion. Additionally, the container will be designed to fit your existing stirrer.

Great for liquid pressure delivery! This is a pressure vessel for liquid pressure delivery with a clamp band design!

Custom-made (Special Order) Examples - Installation of a magnetic stirrer - Changing the packing material to fluororubber - Manufacturing a dedicated cart - Installation of a square window for internal inspection - Surface treatment (electropolishing, coating) Specifications [Common] Material: SUS304 Packing: Silicone [PCN-F]: 10L to 80L [PCN-F-L]: 10L to 80L Drain: 1S to 1.5S ferrule Caster: SUS urethane wheels (2 with internal stoppers) [PCN-F-J]: 10L to 80L Jacket section nozzle: 1S ferrule [PCN-F-J-L]: 10L to 80L Jacket section nozzle: 1S ferrule Drain: 1S to 2S ferrule Caster: SUS urethane wheels (2 with internal stoppers) Up to 40L: 3-legged 50L and above: 4-legged