Press parts
Press parts
Here is an introduction to press parts.
1～19 item / All 19 items
-
Cushioning materials [such as urethane, polyethylene, silicone, etc.]
Introduction of high-performance cushioning materials such as shock absorption, soundproofing (sound absorption), and waterproofing!
last updated
-
Tape processing [single-sided tape, double-sided tape]
From general-purpose to high-performance materials! Introducing our tape processing technology!
last updated
-
Resin films such as PET, PC, and PMMA [press processing]
Short delivery times, small lot prototypes possible! Introduction to plastic processing technology.
last updated
-
Water-repellent mesh, ideal mesh material for the speaker section.
Mesh material with excellent sound permeability, dust resistance, and water repellency!
last updated
-
Carbon washers are recommended for fishing gear due to their excellent sliding properties and durability!
【Proven track record with a major fishing tackle manufacturer!】Introducing washers made from carbon-based materials that excel in sliding properties, durability, heat dissipation, and thermal stability.
last updated
-
Poly slide washer! Good sliding properties and resistant to wear!
When it comes to wear resistance and sliding properties, it's the poly slider washer!
last updated
-
Nylon 6 (Polyamide 6) washers can be processed! We have our own molds.
We own a large number of our own molds, so there are cases where there are no initial investment costs! For automotive parts and electronic devices! It becomes flexible due to water absorption, increasing impact resistance.
last updated
-
66 Nylon (Polyamide 66) can be processed into washers! We have our own molds.
We own a large number of our own molds, so there are cases where there are no initial investment costs! It excels in strength, heat resistance, and sliding properties compared to nylon 6.
last updated
-
PET (Polyethylene Terephthalate) washer processing is possible!
We own a large number of our own molds, so there are cases where there are no initial investment costs! It has more excellent properties than other films!
last updated
-
Carbon feather washer processing is possible! Can be accommodated with our own molds.
We own a large number of our own molds, so there are cases where initial investment costs are not incurred! The material is polyester film coated with carbon black.
last updated
-
Soma Black (black film) washer processing available! In-house molds available.
We have a large number of our own molds, so there are cases where initial investment costs are not required! Used for optical devices and camera units of mobile phones! Used for light shielding and reflection prevention in optical devices.
last updated
-
PTFE (Teflon, fluororesin) washer processing is possible! We have our own molds.
We have a large number of our own molds, so there are cases where there are no initial investment costs! It has self-lubricating properties and a low friction coefficient among all solids! Suitable for electronic devices and food equipment!
last updated
-
Processing of PI (polyimide) washers is possible! Can be accommodated with in-house molds.
We have a large number of our own molds, so there are cases where initial investment costs are not required! Due to the low content of impurities, the occurrence of outgassing is also very minimal!
last updated
-
PE (soft and hard polyethylene) washer processing available! In-house molds available.
We have a large number of our own molds, so there are cases where initial investment costs are not incurred! Affordable plastics with excellent cold resistance and chemical resistance that can be used in a wide range of industries.
last updated
-
POM (Polyacetal) washers can be processed! Custom molds available in-house.
We own a large number of our own molds, which means there are cases where initial investment costs are not required! They excel in fatigue resistance, wear resistance, creep resistance, and dimensional stability.
last updated
-
PEEK (Polyether Ether Ketone) washers can be processed!
Washers with excellent chemical resistance, heat resistance, and flame retardancy! We own numerous in-house molds, so there are cases where initial investment costs are not required!
last updated
-
PP (polypropylene) washer processing is possible! Can be handled with our own molds.
We own a large number of our own molds, so there are cases where there are no initial investment costs! Polypropylene, which has similar properties to PET, is lightweight among plastics.
last updated
-
PC (polycarbonate) washer processing is possible! Can be accommodated with our own molds.
We own a large number of our own molds, so there are cases where there are no initial investment costs! Polycarbonate has high transparency and strength, to the extent that it is used in bulletproof glass.
last updated
-
PTFE (Teflon, fluororesin) washer
It has self-lubricating properties and a low friction coefficient even among solid materials! Suitable for electronic devices and food machinery!
last updated